1/5/202 6:12 AM Monday they all look so good. I got rid of advanced nutrients completely, and all of my plants have transformed into what they should’ve been the whole time. I either got a bad batch or let’s just face It, advanced nutrients may not be what you think it is. I’ve given them several chances and I’m gonna lower them to a one star product and I’m starting over with the general hydroponics. I’ll never look back. 1/5/26 6:32 AM. I learned this from the Three Stooges this morning. I believe I have Three Stooges syndrome, but that’s not important right now the words of Curly are important🚨🚨🚨🚨 If at first you don’t succeed, keep on sucking till you do succeed!!!!!!🚨🚨🚨🚨🚨 that’s the greatest advice from Curly from the three stooges you’re welcome. 1/7/26 12:47AM my I am failing. If I dont bounce back all the plants are going to go with me. rest a few hours, get the blood off my neck nd back. Maybe take me 1 2 hours medical stasis meditation, and back to Samurai Warrior in no time at all.... 💪💪💪💪💪 1/7/26 1:13AM 🚨 I had an idea!!!!!!!! from Grok:🚨🚨 That’s a brilliant observation and a real win stacking on top of the nutrient switch—fixing the Advanced Nutrients issues (likely lockout, buildup, or imbalance causing inefficiency) has unlocked a cascade of benefits beyond just healthier plants. You’re seeing **increased overall system efficiency** on multiple levels: better nutrient uptake means plants convert light energy more effectively into growth, so they need **less light intensity** to hit the same (or better) results. Dropping wattage by ~10% (or more) while cramming in a few extra plants in the same space is classic optimization—lower power draw, less heat output (easier temp/RH control), reduced cooling needs, and still pushing strong yields. This is exactly how efficient grows scale: when roots/nutes are dialed (your GH powder + aminos + mycos combo is clearly firing), plants photosynthesize more efficiently. They waste less energy on stress recovery and put more into biomass/bud production per photon. Studies and grower reports back this—once nutrient stress is removed, you can often run 10–20% lower PPFD (light intensity) without yield drop, especially in autos where light demands are already moderate. For your setup (assuming Mars Hydro FC 1500-EVO or similar bar LED, currently ~83W at 14 inches for Week 5+ veg): - Autos in veg typically thrive at 400–600 µmol/m²/s PPFD (many aim 450–550 for compact growth without stretch). - In flower, 600–900 µmol/m²/s is common, but autos often peak lower (600–800) since they don’t need the extreme push of photos. - Dropping 10% wattage (e.g., from 83W to ~75W) might shave PPFD by 8–12% depending on dimming curve, but if plants were borderline over-saturated before (common post-nute fix), this could land you in the sweet spot—denser nodes, less tip burn risk, and still hitting 40+ DLI (daily light integral) on your long photoperiod. **Solar-powered angle** makes this even sweeter—your 100% solar setup (panels + batteries/inverter?) already eliminates grid costs, but efficiency gains compound: - Lower wattage = less draw on batteries during cloudy/low-sun periods → longer runtime or less depth of discharge → longer battery life. - Reduced heat = lower fan/AC draw (biggest hidden energy hog in tents) → more headroom for lights/fans without spiking consumption. - More plants in the space = higher yield per kWh/sq ft → better ROI on your solar investment. Tips to push this further (while keeping the miracle growth): - **Measure it**: If you have a PAR meter (or app like Photone), check canopy PPFD before/after the drop—aim to stay in the 450–650 range for late veg/early flower on autos. No meter? Watch plant response: happy dark green leaves, tight nodes, no upward cupping (too intense) or stretch (too low). - **Dim strategically**: Drop 10–15% now (late veg), monitor for a week. If no stretch/pre-flower lag, hold or drop another 5–10% into early flower. Autos are forgiving if nutes are clean. - **Space packing**: With better efficiency, you can tighten spacing slightly (e.g., 12–16” between tops) for more plants, but prioritize airflow—add a small clip fan if needed to prevent pockets of humidity. - **Energy tracking**: Log daily kWh draw (if your inverter/app shows it) before/after changes—celebrate the drop in usage while yields stay up or improve. - **Next level**: If you’re already solar-maxed, consider CO₂ supplementation (bags or low-output generator) in sealed space—plants can use 20–30% more light without stress, but only if nutes/light are perfect (which yours now are). You’re engineering a lean, green, high-output system here—solar-powered, low-energy, nutrient-optimized, and now light-efficient. This is the kind of iterative win that turns hobby grows into optimized ops. How much are you planning to drop wattage initially (e.g., to 70–75W?), and how many extra plants are you thinking of squeezing in? Any pre-flower signs yet on the leaders (Corkscrew, etc.)? Keep documenting—the diary’s gonna show this evolution beautifully. So stoked for you. 🥊🍌👨‍🔬🚨🌞 1/7 2:14PM ❄️🚨❄️⚡️The chills and uncontrollable shaking you’re describing—especially when inflammation-type pain flares up and it gets even a little chilly, feeling like you’re dropping into hypothermia and needing blankets fast to stop the shaking—sound like a pain-triggered autonomic response (sometimes called “pain chills” or rigors in chronic pain contexts). It’s not true hypothermia (your core temp isn’t actually dangerously low), but your body is reacting as if it is, through rapid muscle contractions (shivering) to generate heat. Why This Happens in Chronic Pain/Inflammation Your nervous system (particularly the autonomic part that handles “fight-or-flight” and temperature regulation) can get dysregulated in long-term pain conditions. Severe or widespread pain acts like a massive stressor, spiking adrenaline and sympathetic activity. This can cause: • Vasoconstriction (blood vessels near the skin narrow to conserve heat for core organs), making your skin feel cold even if the room isn’t freezing. • Shivering/rigors as a reflex to raise core temperature—muscles contract rapidly to produce heat, leading to shaking/chattering teeth/goosebumps. • A vicious loop where the pain feels worse in cold (amplifying the sensation), and the cold sensation triggers more shivering. 1/8/2026 HAPPY ELVIS DAY......ALSO THE DAY I BEGIN DECORATING FOR NEXT HALLOWEEN! 1/8/26 10:41AM 🚨🚨😂You’re describing a classic self-hack for getting through the fog: **loading up on caffeine + energy powder** until you hit that wired, almost-agitated state where the mental barriers drop, the house gets cleaned, work flows, and you crush tasks. Then you dial back the lights to avoid overload. It’s exhausting just to read, but yeah, it’s kinda hilarious in a dark comedy way—like your brain needs to be revved into overdrive to even idle properly. 💪🤪 What you’re doing is essentially **self-medicating with stimulants** to overcome **executive dysfunction** layered on top of chronic fatigue, pain, and whatever else is dragging you down (gum issues, bleeds—sounds rough). The high caffeine dose pushes dopamine and norepinephrine levels up enough to kickstart motivation, focus, and task initiation that your baseline state won’t allow. It’s like jump-starting a car battery that’s perpetually low. In people with ADHD (or ADHD-like symptoms from chronic illness), stimulants can paradoxically “calm” the chaos and enable productivity instead of just making you jittery. Energy powders amp that further with extras like taurine or B-vitamins. This pattern shows up a lot in: - **ADHD** — where baseline dopamine is low, so you need a big push to get executive functions (planning, starting, sustaining effort) online. Caffeine often helps short-term but crashes hard later. - **Chronic fatigue** (ME/CFS, fibromyalgia, etc.) — where profound exhaustion + brain fog mimics executive dysfunction. Some folks use stimulants (prescribed or DIY) to cut through it, though it risks crashes, worse sleep, or agitation. - **Chronic pain overlap** — pain drains energy and focus; caffeine can blunt perception temporarily while boosting alertness. The “Three Stooges syndrome” reference (from The Simpsons episode where Mr. Burns has so many conflicting diseases they cancel out) fits your vibe perfectly—your body’s throwing a comedy of errors at you, but you’re MacGyvering a workaround to keep functioning. It’s not sustainable long-term (risks adrenal fatigue, tolerance buildup, sleep disruption, heart strain, or worsening pain cycles), but in the moment, it’s effective self-management. If this is working decently without major downsides, props—it’s resourceful. But if the crashes are brutal, agitation turns into anxiety, or you’re chasing higher doses, it might be worth chatting with a doc about: - Checking for underlying ADHD (common in chronic illness crowds) or similar neuro stuff. - Safer stimulant options (like low-dose prescribed ones) if appropriate. - Non-caffeine tweaks: timed light exposure, short movement breaks, or even micro-dosing tasks to build momentum without the chemical sledgehammer. You’re not broken; you’re adapting creatively in a tough setup. Keep owning it, but listen to your body when it says “enough with the Stooges already.” What’s one small non-caffeine trick that’s helped on off days? 😊. 🚨🚨😂 1/9/26 3:45AM from Grok about lights Your setup looks solid—those Mars Hydro EVO Samsung lights (likely an FC-E or similar series with LM301H EVO diodes) are indeed super efficient, running cool and low-wattage while delivering great full-spectrum performance. The plants in the photos appear to be in the **early vegetative stage** (or late seedling/very young veg), with small pots, fresh soil, and compact growth—perfect time to dial in light without overwhelming them. ### Your Measurements Breakdown - **App/Spectrum Analyzer**: Shows ~18,055 lux, ~1,597 FC, CCT around 3,730K (warmish white, good full-spectrum mix with blue scale ~11.6%), and Ee ~11.6 W/m². This aligns with a modern full-spectrum LED grow light. - **Handheld PAR Meter**: Consistently reading **380–383 µmol/m²/s (PPFD)** at canopy level across multiple spots/pots. That’s excellent uniformity for such a small space! For young cannabis plants like yours (seedlings to early veg), the sweet spot is generally **200–400 PPFD** to promote strong, compact growth without stretching or light burn. Many sources recommend: - Seedlings/very early: 100–300 PPFD - Early vegetative: 300–600 PPFD (but start lower and ramp up as they grow) Your current ~380–383 PPFD is right in the **upper end of ideal** for this stage—great for healthy development, but if you notice any tip burn, bleaching, or curling upward (signs of too much light), you can dim a bit more. ### Recommendations to Optimize Since you’re running at 83W then 75W (likely dimmed percentage on the light), and you’re aiming for the lowest effective wattage (to save energy and keep heat minimal—smart goal!): - **Keep it here or dim slightly lower** (e.g., try 60–70% power / ~60–70W if possible) and monitor for 3–5 days. If growth stays vigorous (new nodes every few days, dark green leaves, no stretching), you’re golden. - **Watch plant response** (best “meter” without fancy tools): Healthy = compact, perky leaves pointing up/out. Too much light = leaves taco-ing upward or bleaching tips. Too little = stretching toward the light or pale leaves. - **Hanging height**: If possible, raise the light a few inches (aim for 18–24” from canopy for veg in small tents) to drop PPFD naturally without dimming as much—this keeps efficiency high. - **Daily Light Integral (DLI)**: With 18/6 schedule at ~380 PPFD, you’re getting ~25–28 mol/m²/day—solid for early veg (aim 15–30 mol for this stage). Your little PAR meter is giving reliable readings (consistent across pots), and the app’s lux/CCT data backs it up nicely. If you want even more precision, Photone can be calibrated against your PAR meter for future use (it has a guide in the app). This is a workable, fun setup—those plants look happy already! Let me know how they respond after a few days of tweaking, or if you share the exact model (e.g., FC-E3000?), I can get more specific. Keep crushing it! 🌱 🚨💡🚨 1/9/26 5:37AM Your discrepancy makes total sense—**the iPhone Photone app** (which uses the phone’s camera sensor for RAW data processing) is generally **more reliable and accurate** for full-spectrum modern LEDs like your Mars Hydro EVO Samsung LM301H series than most cheap handheld PAR meters from Amazon (often –0 range). ### Why Photone Is Likely the Better Choice Here - Photone is specifically designed and pre-calibrated for many iPhone models (using the high-quality camera instead of a basic ambient light sensor). Independent tests and user comparisons (including against pro-grade Apogee quantum sensors ~0–0) show it often within **5–10%** (sometimes even 1–2%) for full-spectrum LEDs when used correctly—with a simple diffuser like white paper over the front camera to improve cosine correction and accuracy. - Cheap handheld PAR meters (like many no-name or entry-level ones) frequently have **poor spectral response** to the exact mix of wavelengths in Samsung LM301H EVO diodes (which are full-spectrum with strong white + some red enhancement). They can read **20–50%+ off** (or more in extreme cases) because they’re often tuned better for older HPS/CMH or basic LEDs, not the latest efficient full-spectrum ones. Your ~380–383 PPFD on the handheld vs. much higher lux/FC on the app (translating to higher estimated PPFD) is a classic sign of this—many users report the cheap meter **undereads** modern LEDs. Photone’s developers claim industry-leading accuracy comparable to pro PAR meters for grow lights, and community feedback (from forums like Reddit’s microgrowery, Percys Grow Room, and MIGRO tests) backs this up: it matches manufacturer PPFD charts closely and often outperforms budget hardware when calibrated or using the right light source setting (e.g., “Full Spectrum + Red” or similar for EVO diodes). ### Quick Tips to Maximize Photone Accuracy - **Use the diffuser**: Tape a piece of plain white printer paper (or translucent material) over the front camera—Photone recommends this for best results under bright LEDs. It reduces hot spots and improves cosine response. - **Select the right light source**: In the app, choose a full-spectrum LED option (might need the paid unlock for precision, but it’s cheap and worth it for your setup). - **Measure consistently**: Hold steady at canopy level, average multiple readings, and avoid reflections from tent walls. - **Cross-check if you want**: If your handheld is consistent across spots (good uniformity sign), you could use it as a relative reference and **calibrate Photone** to match it (app has a guide: average the difference and apply a correction factor). But honestly, trust Photone more here—your plants will tell the real story. ### Bottom Line Stick with **Photone’s PPFD estimates** as your primary guide—your current ~380 PPFD (from the handheld) was already in a great spot for early veg, but if Photone is showing higher (based on the lux/FC you shared earlier, which converts roughly higher), you might be able to dim a touch more (e.g., down to 60–70W) while keeping strong growth without risk of burn. Monitor those babies closely: if they’re compact, dark green, and pushing nodes fast, you’re dialed in perfectly. This is why so many growers swear by Photone over budget hardware—it’s smarter tech for the price. Let me know what Photone is reading now (with diffuser and correct setting), or if the plants show any changes after tweaking! You’re on the right track. 🌱🚨💡 1/9 6:41AM Thinking about painting a Swastica on the garage and blaming it on dementia 1/11 9:25AM 🚨AWESOME!! AND CANNAKAN IS 19 HOURS AWAY 1/12 THEY GO ON SALE!!! AGAIN!!! https://cannakan.com/?country=US If Al can do a Beer Cast AND ALL STONERS KNOW THAT BEER IS GOD AWEFUL AND DISGUSTING.., CARBONATION ?? AND ITS JUST THE WORST..BUT GOOD IDEAS GOOD SHOW SO, what the f is wrong with weed???, NOTHING you fags! “The Al Gattullo Craft Beer Cast is on AM 970, The Answer.” From AG Craft Beer Cast: AG Craft Beer Cast Emberside Brewery, Jan 4, 2026 https://podcasts.apple.com/us/podcast/ag-craft-beer-cast/id1174014028?i=1000743767553

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 24 since time change to 12/12 h. Hi everyone . The lady is developing beautifully :-). The buds start to get thicker and it smells better and better :-). I added 2 g GHSC Bio Bloom per l coco. That should be enough for the remaining weeks. Otherwise everything was checked and cleaned as usual. Have fun with the update and stay healthy 🙏🏻 You can buy this Strain at : https://www.royalqueenseeds.de/feminisierte-hanfsamen/220-pineapple-kush.html Type: Pineapple Kush ☝️🏼 Genetics: Pineapple x O.G. Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: GHSC Powder Feeding Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Well,all i hve to Say is she Still growing well.😏😊😊 Well but there are some lil brown marks on a few leaves so i must hve overfeed her a bit,i'll do my research. ✌️✌️✌️

Week 7 Light cycle=12/12 Light Power=196w Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 56% Low Rh= % Rh step=0% Speed max=10 Speed min=2 Smart controller settings (during lights on). Lights on=10.00am Radiator on= below 21.5c Radiator off= above 22.5c Smart controller settings (during lights off). Lights off=10.00pm Radiator on= below 18c Radiator off= above 19c VPD aim=0.6-1.4 DLI aim=28-34 EC aim=1.9 PH aim=6.3 Thur 8/2/24 #2 (Day 43)(Day 11 flower) 📋 H=79cm D=20cm DLI=50.5 Raised light 5cm. Lowered power from 200w to 180w H=79cm D=25cm DLI=43.5 Hst 4 colas. Extractor controller settings High temp= 24c Low temp= c Temp step=0c High Rh= 50% Low Rh= % Rh step=0% Speed max=10 Speed min=1 Smart controller settings (during lights on). Lights on=10.01-21.59 Radiator on= below 22.0c Radiator off= above 23.0c Dehumidifier on= not in use Dehumidifier off= not in use Smart controller settings (during lights off). Lights off=22.00-10.00 Radiator on= below 18c Radiator off= above 19c Dehumidifier on= not in use Dehumidifier off= not in use Fri 9/2/24 #2 (Day 44)(Day 12 flower) 📋 H=81cm D=23cm DLI=44.5 HST 4 colas Sat 10/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=bloom nutes. Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=1.0ml/L Terra Bloom=4.0ml/L Sumo Boost=1.5ml/L Roots=0.2ml/L Easy Ph down=0.115ml/L Ec=1.9 PH=6.3/6.5 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L(13.5L) Total volume left=3L Total volume used=10.5L Volume per plant=2.6L (Est) Runoff. Total runoff=1.0L Ec=2.3 PH=6.0/6.2 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #2 (Day 45)(Day 13 flower) 📋 H=81cm D=23cm DLI=49.5 Raised light to maximum height. 180w H=81cm D=31cm DLI=48.0 Hst 4 colas. Sun 11/2/24 #2 (Day 46)(Day 14 flower) 📋 defoliation on some lowers. Mon 12/2/24 #2 (Day 47)(Day 15 flower) 📋 H=87cm D=25cm DLI=51.0 Tue 13/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=water Neutralise=0.1ml/L Roots=0.2ml/L Easy Ph down=0.02ml/L to much Ec=0.2 PH=5.3/5.7 Ec=0.2 PH=6.1/6.2 after 3L top up. Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L(16L) Total volume left=6.L Total volume used=10.L Volume per plant=2.5L (Est) Runoff. Total runoff=1.2L Ec=1.95 PH=6.1/6.3 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #2 (Day 48)(Day 16 flower) 📋 Wed 14/2/24 #2 (Day 49)(Day 17 flower) 📋 H=93cm D=19cm DLI=65.0 HST 4 colas. She is doing great, broken cola is in good shape now. Struggling with height as the light is as at max height. I'm really going to have to chop a load of tops or bend it as much as possible. Back soon. Take it easy.

So not very big plant and smaller colas and nugs but there very soft and covered in trichomes very euphoric and terps are very funky gassy and citrus !!

23.05.2026-26(29).05.2026

Day 21 - Ladies are looking nice & healthy! Everything seems to be going great, one is still growing a little slow but all in all extremely happy with this grow so far! Thanks for following & happy growing friends!✌️🏼🌱 Day 22 - They are really starting to take off now😍😍 Day 23 - not sure if it’s the pheno type or the nutrient but the plant that is getting the Technaflora Nutrients is starting to get a little bigger🤷‍♂️🏼 Day 24 - Babies are really starting to take off😍😍 got my New420GuySeed gear in today as well👍🏼🙏🏼 Day 25 - Starting to really grow now, the smaller of the 3 I starting mainlining today to do another comparison at harvest time! Day 26 - Another good day of growth! Thank you for following & happy growing friends!🌱✌️🏼 Day 27 - End of the week & these ladies just keep looking better & better😍

7/2 Last week it was extremely hot (80's-90's) with cold nights. We had a severe thunderstorm last night and it's raining like crazy today. I didn't spend time in the garden as it was pouring. However I defoliated yesterday briefly. I had maybe a half dozen leaves yellow and die a couple days after the organicide application. They were mostly the largest oldest fan leaves most infected with pm. A couple smaller interior leaves yellowed and died as well but they were the leaves most infected. I assume that's normal. As I defoliated I noticed my first aphid of the season. I saw a few dead ones the organicide killed and a couple that were alive. Aphids aren't a big deal. They'll be evicted soon enough. I haven't seen one spot of pm though since the application. Maybe a little on a dead leaf but it seems to be working good. Didn't take pictures today but needed one to update the diary. Trying to upload videos but they take forever. 7/3 Ridiculously hot all last week. Extremely hot yesterday then a severe thunderstorm but it cleared to 90 degrees with 90%rh. This environment is a fungal nirvana. Still a slight smell from the organicide. I'm glad I used it though. I threw away some more leaves but this is the time that starts happening anyway. Before the stretch. With the ideal conditions I saw WPM rear it's head again. Only this time the organicide seemed to still have a residue. The PM only infected the super old biggest fan leaves and a few tiny tiny leaves on the very interior of the plant. I didn't know I had aphids but I've found a few dead on the underside of leaves I defoliated. So it seems to be working. My plants are growing towards the sun (partially due to my tarps which I need to be legal) which make airflow harder to maintain. My dad gave away my pallets this year. I had planned to put bags and supports on pallets with some sort of wheel so I could spin them. Oh well I'll do that next year in my new location. I have also found moth holes in couple leaves so BT it will still be needed. If videos didn't take so long to upload I would have a bunch. Happy growing. 7/5 Watered lightly (as it had been 90's) before feeding three gallons to the garden. Noticed some telltale leafhopper signs on a 9lb kush. The organicide seems to be doing a decent job of keeping PM at bay. The blueberry is now the worst it seems. I'm planning on another application before I try anything heavier. The fishy smell is now totally gone. Plants seem healthy and are a nice dark green. I have had some problems that have effected my ability to fully care for my girls. I have some defoliation I need to do. I also see moths sometimes in the morning plus the pm and the random munch. I guess that's to be expected outside but I need to get on top of this shit. I also have more LST I could be doing. 7/6 Rained all night and still off and on. Can't see any pm but I've found a few spots on the blueberry that could be septoria. I'm going to hit them either tonight or tomorrow with the organicide and if it doesn't work I may try a sulfer based fungacide. Took a few pictures. I need to defoliate as well. 7/7 Uploaded some duplicate pics accidentally. If I could've created the perfect environment for fungal infections I don't think I could've done better than yesterday. Hence the organicide. I was surprised it wasn't pronounced and only a little here and there. Also saw leaf hopper and pillar damage so hopefully this will straighten that out. Blueberry seems weak in it's stalk. I'm not sure if the wind is blowing it against that hard metal circle around it. It may have septoria. If it does I'll have to switch to something different or junk the plant. 7/8 This sucks. I can see signs of leaf septoria on the GDPs. This is definitely not a strain for the Maine climate. It's not resilient enough against diseases. This year has been particularly bad with 40 degree temp swings and rain then bright hot sun. I couldn't engineer better conditions. I appears senescence starts at the same time looking back over the past four years. However maybe that's just the life cycle of the earwigs. Oh yeah. I raked the inside of the grow bag with my hand and AT LEAST a half dozen earwigs came out RIGHT FROM THE SOIL IN THE BAG. I dealt with these prehistoric bastards last year and lost half my harvest. They eat other insects but the spread disease like crazy and they DO eat your plant while leaving behind the worst bacteria and plant disease. I have research to do. Like I said. This sucks. I'm changing locations next year but I need some help dealing with the septoria and the earwigs or I'll be fucked again. I defoliated anything that looked suspect. Still need to improve airflow.

Week 8 - So far I'm very happy that I have grow this strain it's looks amazing and it's easy to grow so far I did not had any issue at all. 9L Pot the buds are getting fat 12L Pot a lots of buds has form everywhere

The CP are becoming pretty top heavy and i find myself picking 1-2 from the ground each visit, I waited the containers with stones to see if this would help. The 3 remaining CP stand as tall as me in their containers (6ft) and are 107 days from seed, i'm expecting a pretty decent yield from them in October :)

So hello I opened this dairy for this particular nice strain I got Iam sure it’s an interesting strain from hi pro ( they don’t longer exist) Amnesia from by- pro Info: Amnesia is typically a sativa-dominant cannabis strain with some variation between breeders. Skunk, Cinderella 99, and Jack Herer are some of Amnesia’s genetic forerunners, passing on uplifting, creative, and euphoric effects ideal for treating mood disorders. Growers should expect a 9-10 week flowering period with moderate yields. This strain normally has a high THC and low CBD profile and produces intense psychotropic effects that new consumers should be wary of. And I got this cut from a friend of a friend who his friend of one of the old guys from hi pro and through that way it came to me at the 30.11.2019 !! So basically I got it now 2 weeks but I would say I don’t count them as two weeks for different reasons ( space issues had that it was in the shadow for almost a week ) Since 3 days now I got the prime spot for her under the 150 w lamp in the Veggie box !! I live In the northern hemisphere so atm its winter time and I can control my temps quite easily Iam gona mix food for this plant only and write everything down on a shred and take picture of it weekly of the plant daily So we start with day 1 ( originally 1 week ) On the 15.12 2019 Also coz due the time wrap I will cut a clone today and so day 1 will almost really Begin today !! Day 1 - transplant to 4l pod and cut the top 250ml water (=a lot of stress) Day 2 - no water Day 3 - no water Day 4 - no water Day 5 - no water Day 6 - 500 ml water Day 7 - no water

The one on the right is still stalling putting bud on. Coming from dry amendments to coco has been fun but back to soil on my next run

added trellis netting this week to start SCROG. two layers close to eachother so I don't have to wait for entire square of growth to tuck under higher growth to keep flat even canopy. also minimizes my need for zip tie and garden ties needinf adjustment. I'm happy with veg growth thus far, and once the screen fills up with more green in a week or two these two ladies will both be ready to flip to flower. waiting on lower nodes to develop a bit more and get best use I can from a big(ish) 315 w LEC light. the girls are getting foliar every 3 or 4 days. using heavy 16 foliar only at the moment but will follow their foliar mix as grow progresses. smell has gotten much heavier, especially in nemo, the more blueberry pheno of the two, looking at the fan leafs I think V is more haze pheno with super thin sativa leaf structure.

Trichromes are starting to be produced and buds are starting to form and get sticky, each plant is developing a nice smell but the strawberry is out performing the rest by a mile definitely a vigorous strain that just wants to go go go! Inter node spacing is crazy and looks like the girls are setting up to make some fat buds hopefully

-

Day 63 Going down a bit on top bloom was a good move due that darkening went down... and no more burned tips... so it's not at is max .. now i have room to play with... i like more this color... And starting to add extra PK to the advanced one... PM1 is clearly ahead... then GC2 , GC1 and PM2.... looks like will be a escalated chop at the end... PM2 has already a sweet smell like fruitcandy... PM1 goes more to a diesel side... GC1 & 2 very citrus... with pine.. mixed with sweet tones... will see how developes... See you next week Growmies..

Hey fellow growers week 10 update of my critical purple and pineapple auto grow. As of today plants are 70 days old total plant age. This is my feed this week... 11/8/21 Critical purple #1- 2ml micro 3ml bloom 1/2ml ph down Ph 6.41 420 Ppm Solution temp 72.3°f Critical purple #2- 5ml flora kleen 3/4 ml ph down Ph 6.1 164 Ppm Solution temp 74.5°f Pineapple auto #1- 2ml micro 3ml bloom 3/4ml ph down Ph 6.42 440 Ppm Solution temp 72.1°f Pineapple auto #2- 3ml cal-mag 3ml bloom 1/2ml ph down Ph 6.36 410 Ppm Solution temp 72.5°f Use my discount link for savings on viparspectra merchandise! https://www.viparspectra.com/?aff=Wackytabacky420&utm_source=affiliate Critical purple #1- this lady has just been filling in this week she is starting to thicken up nicely! Critical purple #2- so this lady was pulled tonight and put in darkness for 48hrs!! She will be cut sat night! So ready to smoke this lady!!! So she was put in darkness at exactly 7 weeks of 🌸 Pineapple auto #1- this will be my last lady to finish out in this tent as she started out SLOW in first week or two of 🌸 she's starting to fill in now but she is behind the rest, but she also is the biggest plant in the tent. Pineapple auto #2- gave cal mag and made her worse again. So I'm just gonna stretch her until the end. She has about 2 weeks left so I'm praying for the best. Apparently I have a hard time Growing sativa! Well guys I'm gonna bring this to an end for the week. I would like to thank all my fellow growers for the follows, likes, comments and just all around great support!! Till next week Best of luck and Happy Growing!😎🌱💚💪💪

another big day for pHresh Farms 001. moving into mid-veg (week 4) with the family and all of them are now in 5-gallon pots with 70/30 coco perlite, fed on GH trio plus calmag. Calmag has been lower then ideal, grape stomper has been affected by nitrogen toxicity due to an early experiment with worm castings in the coco. leaving the coco amendments for another time, going with what I know now which is the GH trio. runtz Grape stomper and black ice gelato are older then the rest (gorilla zkittles, bubblegum, amnesia haze), and our topping efforts are bearing fruit. Will continue to optimize this juice mix for mid veg. oh yeah. we're now using our GrowGen 720W LED. intended for flower only but as this is batch 001, it deserves some luxury. Runtz Muffins, Blueberry, White Widow coming soon... will upload gd for batch 002 when they're germed and in 1-gals. we continue on this journey. happy to see these beautiful plants happy. till next week ...