Recommended
Likes
Comments
Share
The growth and appetite of these two plants has increased proportional to the airflow increase. The BHB is drinking 4 liters a day, the CBD, 2 liters. Every second day is a feeding. EC drops by approximately 2-3 points every 48 hours. PH rises from 5.5 to 5.8-5.9 every 24-48 hours. CBD's issue was Magnesium. Added Epsom salts to the res and issue is no more. Both plants are stacking very well and the CBD has now caughtup to the BHB's height. CBD is at 66 cm while the BHB holds steady at 70.
Processing
Likes
13
Share
@4F1M6
Follow
I started germination of 5 Royal thai regular beans on 01/01/2021. HAPPY NEWYEAR! I am germinating them using rockwool cubes and a humidity dome. I pre moistened my plugs with ph balanced water to 6.4 . Than enlarged the pre made holes using a wooden dowel. Than sowed my 5 beans into the holes. I then ripped a small piece of rockwool off each plug and mulched it up. Than lightly filled in the holes using the mulched rockwool. Than it was into the humidity dome to marinate, and complete the germination process. Will likely take roughly 4 days to get some sprouts. Starting my adventure with Spliff Seeds Royal Thai. After they emerge I will get the plugs planted into 3 gallon pots to rock and roll. Cant fucking wait! Spliff Seeds Royal Thai is a cross of a Early Thai mother and a Skunk #1 father. This mashup produces a lanky, stretcher variety signature of classic sativa strains. The strain gas a roughly 12 week flowering time. There is 3 distinct phenotypes from these genetics. One with fluffier sativa signature bud structre. One with chunkier, bulky bud structre coming from the skunk #1 father. Lastly but definitely hope to get me one of these!!! Is the phenotype that Carrys over that signature thai chocolate terpene pallet. Though it takes the longest to mature... Best believe it's well worth the wait. Considering the natural plant stature and stretch. This will be a short veg, faster flip run. To keep these ladies tailored and suited for a indoor grow. All things considered... I'd probably get best results throwing these beans out during outdoor grow season. Letting them beast out and become trees. Mabey we just might try that with another batch. But with the research into the variety I've done I'm sure I can make em work some magic indoors. I'm amped for this.
Likes
10
Share
@MG2009
Follow
09/26/2021 Starting week #7 of flower still picking caterpillar, and eggs of leaves, not to serious as we are on top of it. Starting the week with banana peel tea drench 2 gallons per girl, which is all she will get besides water till harvest. Still small flushes of pistils coming out I believe she (Hulk) is in final stage of flower (4) lots of orange hairs (pistils) but fresh one coming out daily albeit slower. Hopefully she fatting up in coming weeks. 09/28/2021 Week7 Day #3 Definitely seeing more calyx swelling. #1 is chunking up nicely #2 looks good little bud rot were caused from cattipillar poop! #3 coming from behind Will be last to harvest for sure.
Processing
Likes
18
Share
@Canadian
Follow
pistils on this one start to turn Amber here and there in the buds are incredibly dense and Indica like fantastic very strong smell easy to grow no problem . Thank you for reading I will continue to update have a happy grow.
Likes
27
Share
Perfect and good taste, good for sleeping and working on everything
Likes
19
Share
@Freedonia
Follow
Day 29. I adjust the LST to form the canopy. pH at 5.8 Day 30. It's not necessary to adjust anything, just a little the main stem. pH at 5.7. Growing well :D Day 32. I change the water in the tank, I go from the vegetative table to the flowering stage, keeping the same Ec pH to 5.9. I make some small adjustments to the LST and remove a few fan leaves. Day 35. Growth is pretty good. The pH drops about 0.5 by day, the plant drinks about 1 liter a day, (I think this is due to the decrease in pH). First defoliation. In general, the week has been good. Now I have to deal with the daily pH drops I think caused by the water intake of the plant. Possibly one more week of stretching remains, Auto Mandarina is 70% sativa 30% indica, so an Indica dominance would be better for my set up.
Likes
13
Share
Added nutrients to top off reservoirs everything looks good …I am content so far with testing will be dropping light schedule to 11 on 13 off to accelerate bud development hopefully shortening flowering time
Likes
8
Share
@Cadman
Follow
So the nuggets are dense and doubling in size every few days, the trichomes are cover the plants and they are sticky. The Girls are thirsty, I'm topping them off every other day with 1.5 gallons of nutes, at this point I feel like all i'm doing is mixing nutes in the reservoir. By the time I switch over season two to the grow room, i'm going to increase the size of my reservoir to 10 gallon so I can spend less time mixing. I'll be flushing out the buckets in 2 weeks to give the girls fresh water for the final 2 weeks! My Burp bucket project worked out great. Thanks to several youtube videos those videos are much appreciated! I made a few modification to what I saw online. so here's the parts list: (1) 3.5 gallon Menards Bucket (1) Gamma Bucket Lid 18" Black Irrigation drip tubing 12" Fish tank air hose (2) Fish tank check valves (1) tee for air line (1) small fish tank pump I started out modifying the input, most of the videos I saw had a hose with a check valve just poked in the lower part of the bucket with pin holes and end tied off. What I did is I took the black tubing and circled the bottom of the bucket, then I took a small drill bit and drilled holes through the tubing about every 2 inches to disburse the air all the way around the bucket then I used a tee to connect the 2 ends of the circle and connected that to the tube entering the lower portion of the bucket. the next change I made was instead of having a short hose poke through the upper portion, I drilled a small hole and hot glued the check valve inside the bucket with only the top of the valve sticking out of the bucket. After you get all the hoes and check valves in snap on the Gamma Lid, Tighten it up and turn on the pump. I added the hoses going into the water so you could actually see that its working I plugged the pump into a smart outlet and set it to run for 20 min 3 times a day, so no need to manually burp your nuggets while they are curing. You'll also need to put a 62% boneva 2 way pouch in the bucket with the nugs to keep the humidity correct and optionally have a small hydrometer to verify, I'm going to mount one on the lid to be able to check it without having to open the bucket. unless curiosity gets the best of me....
Likes
34
Share
Not much to say at the minute but Candyman is looking happy, I really hope they are female now 🤞🏻 added a small amount of Nutrients and already seems to be loving it and getting bigger daily 😍
Likes
23
Share
Day 27 flower: I love the Gz strain with a passion. The colours that are beginning to shown on all of their buds are beautiful already and they are not even half way through yet !!. #1 is by far the biggest girl with so many tops going for her final yield weight. #2 is plodding along still in her indica stout kinda way. forming ok too #3 was the tallest of the 4 and had to be supercropped to get the lower buds some light down there. gave 5 mains a 90° bend. #4 is still a little lady but is making nice bud stacks for the party too. They are getting sticky icky now too and smell really fruity when rubbed a little well done Barneys Farm
Processing
Likes
5
Share
Likes
17
Share
Had to pull some of the bottom leaves 🍃 to improve the airflow and be easier to water ,very good looking so far ,starting to give her some nutes for flowering every other water
Likes
49
Share
I rated this with top marks for a reason. Two pheno's were topped and fimmed while I left one to grow naturally to get a sense for the plants structure. I'll try to convert some pictures and upload them. This is the darkest smelliest most potent cannabis ive ever grown. I believe I have a new favorite strain. Having been able to selectively harvest two of the plants worked out amazing. After harvesting the nice milky tops, the smaller buds that I left were able to continue growing up through the horizontal trellis and gave me another FULL harvest! Plus I was able to take the late little buds around the size of a quarter (that were all purple with amber trichs) and I was able to harvest AGAIN for the 3rd time and froze a couple lbs wet to make extracts with. This strain was extremely resilient and I don't think I had one spot of botrytis. After harvesting the last two girls (for the third time lol) I noticed they got some powder mildew. That's okay though it was just stuff I wasn't expecting anyway and it went in the freezer. Strain came out just as advertised. Lime green flowers with bright red stigmas that retracted into the flower as it finished. One pheno turned purple towards the end of the season. Very low leaf to bud ratio with this strain. This was one of the worst seasons for growing cannabis but this strain excelled despite the 50 degree temperature swings, weeks of rain, hurricanes and 50mph winds. Not only that, they aren't kidding when they advertise this strain upward of 30% thc. I'll save the effects for the smoke report but this is certainly the STRONGEST cannabis i have ever grown. I am so proud of myself for growing cannabis of this quality. Quantity got me 18 jars and about a quarter of a tote. I'll save the rest for the smoke review. And I'll finish this later. After having had time to cure this strain only seemed to increase in potency. I saved a few lbs wet to freeze and extract. I kind of messed this run up. It still turned out 🔥. I'm used to working with dry material or trim. I think I pushed to hard when I tried to "wick" water away from the hash on the 25u square, I don't think I waited for it to dry long enough end then I didn't let the resin cool before I tried to separate the turkey bags. I left my anxiety meds at my father's and end up ripping the cellophane in 3 pieces. I ended up driving to get my meds with my hands looking like I stuck them in a peanut butter jar. When I made it back the material had cooled. I managed to scrap a ball off my hands. I was then able to dab up almost 100% of the resin! It came ripping up making a loud nose and I'd think I ripped it again. That being said I did lose a little on my hands and equipment. You live and learn I guess. Dry and wet are totally different. However this hash smells JUST LIKE the jars of cured weed. And like I previously said; "If I could design a strain specifically for me, this would probably be it."
Likes
16
Share
Likes
25
Share
This week, there was so much rain in the area. The plants had issues with pest too, but I used Neem-Oil against the bugs and hopefully, the weather and the pest situation will get vetter next week. Nothing much to say on growth due to the weather. Height: Plant #1: 65 cm Plant #2: 89 cm Still impressed by Auto Mazar's growth, even in bad conditions. That's it for this week. 🤙🏼
Processing
Likes
29
Share
@Damonkey
Follow
Things ok.......😳. Nah as soon as I think I gotta hold of something it plays around with me. The grow is going well and the plants are mostly showing a great fast rate of growth. Flower site formation is rapid and covers the whole canopy and below. But alas the temperature she rises😩😩. Last night caught the temp at 32 C. Gorilla growin ain’t always bananas😳 I can vent it quicker and keep the temp a little lower but the noise level is just too high. Here comes more expense😩😂. Update- last day week 2 of flower..... everything looking great one plant a little slow in developing but rest good. LED are still outstripping HPS in the race for mature buds. I can’t wait to try the herb that comes from the plants that have exposure to both kinds of light. I’ve added a pure CO2 spray dispenser in the tent also. It’s from Airbomz. Gives them a quick blast hourly to supplement the exhale bag. This is just a temporary fix for rise in temp I’m floating on and just above 30C during lights on, hopefully the CO2 level in the room should aliw the plants to carry on growing well in s slightly higher temperature.