Once again GALACTIC buds! And once again cant add the comment lol

Hi Growers. So all 3 FastBuds Blue Dream Auto seeds popped in less than 3 days. I’ve left them uncovered, added a humidifier and turned a fan on low to just to give them a little wiggle. They were sprayed and lightly watered in a 4” circle around the stalks to have those roots go search for water. One of the seeds hulls is still stuck to the cotyledon leaves. I’ve been spraying it to keep the membrane moist and hopefully she’ll split it open by herself. In the past when I’ve tried to remove them they cause damage to the leaves so we’ll wait and see. Just gonna give them some time and mist for a week and start super low feeding according to the FastBuds auto feed schedule. I’m looking forward to seeing these babies grow!!! Happy Growing 🌱

Ending up trans set 1 got a lil more space in GH...topped up the other also did some defoliation(everything) and LST HST( set 1&2)

Mazar-i-Shariff (regular) 😎 Genetic Lineage Afghani Indica x Skunk #1 Sativa / Indica 20/80% THC % Up to 20% -CBD % Up to 1% 6th Aug - Day 1 Put the seeds in a glass of room temp tap water, they float, and sink in first 6 hrs. ( keep poking them under the water till they sink. ) 20 hrs and 2 have popped ... planted em in jiffy pots 👍 36 hrs - 3rd popped... 3 in new jiffy homes.... 👍 Day 3 - Abit of movement.... put em in a box with a light..... haha Day 4 - 2 good movers.... :) Day 5 - all 3 moving..... looking like a good start.... :) 😎 from seed site - "Mazar I Sharif x Mazar I Sharif Traditional North Afghan charas cultivar Indica Giant Height: 3-4 meters in natural outdoor environment in Mazar-i-Sharif. Aroma: pungent, intense terpene aroma, classic Afghan, with some sweetness Characteristics: Unusually large indica strain with classic wide leaved characteristics. Mazar-i-Sharif strain produces the legendary hashish known as "Shirak-i-Mazar" and "Milk of Mazar". Over-indulgence produces a mind-warping, immobilizing and narcotic effect. This F1 Mazar-i-Sharif X Mazar-i-Sharif brings two very Nice Landrace Mazar-i-Sharif strains together for some Hybrid vigor in a Landrace strain. The female side was brought back in 2009, by someone that was stationed there on deployment that looked and found the best Cannabis farm he could to get some seeds from. The male line goes back to the gypsy nirvana Mazar-I-sharif line that is still being kept going pure! Flower time can be long but well worth it. Mazar-i-Sharif can be a very hard strain to find pure, so don't miss out on this one."

Update: All plants are progressing well. I've been updating my diary for the two additional strains I started with. Despite some early mix-ups, two are now flourishing and ready for transplanting. I’ve buried the seedlings up to their first true leaves and will soon introduce root juice to assist with the transplant process. Cinderella Jack is heading for a 25-gallon pot, given its robust early growth and a longer growth cycle of up to 14-15 weeks. On the other hand, Auto Euforia and Critical Orange are showing slower development. Euforia is stubbornly pushing through with new growth despite a challenging start. To sum up, I'm managing six plants from four different strains: one Cinderella, one Skywalker, and a mix of Critical and Euforia. I’m confident I've identified at least one of each. Four plants are on target for a decent yield in their 3-7 gallon pots, while the other two will serve as trial plants. I expect the arrival of new nutrients by next week, but for Cinderella and Skywalker, I will continue their current feeding schedule for an extra week since they're slightly ahead of the rest in growth and still will be in 2nd week by week 3 mid. IDK how helpful is 127 LED E27 bulb but something is better than nothing. Will be shifting to indoor after fall so saving for a pretty decent setup now. More updates to come. Any tips or suggestions for a first-time grow in a greenhouse setup would be appreciated!

Chop day. Everything is looking and smelling incredible. The range of smells I've got so far are: floral, grape, blueberry, gas, burnt rubber, tangerine, funk. Everything appeared fully mature beside the Cambodian x Meat Breath and Pak Man so decided this was the best time to cut them down.

I started feeding liquid nutrients this week. Although I’m using Nature’s Living Soil Super Soil Autoflower Concentrate mixed with Fox Farm Ocean Forest—so technically I could water only until harvest—I decided to begin liquid feeding in Week 3 at half the recommended dose. I also have a Tray2Grow Autopot system for automatic bottom feeding, but I haven’t activated it yet. When using liquid nutrients via top feeding, I’d need to turn the Autopot system off and wait until the plants absorb all the water in the tray before feeding from the top. Afterward, I’d have to manually turn the system back on. That seems like a hassle compared to just hand-watering and feeding. I could technically add the liquid nutrients to the Autopot reservoir, but that somewhat defeats the purpose of the system. The tank holds 25 gallons—enough to last a few weeks—but if I want to change or rotate nutrients weekly, I’d have to dump the remaining water and remix the solution each time. If I wanted to feed nutrients every other watering, I’d be changing out the tank every 3 days. Plus, liquid nutrients can cause buildup, so I’d need to clean the reservoir and all the tubing regularly. For now, I’ll stick with hand-watering and top feeding. I’ll only switch to the Autopot system if I need to leave town.

Wo wo wo....stop everyone, friends! Stop for a second and admire my central zkittez that seems to be turning into a Christmas tree 😋 Very satisfied with this flowering start Many greetings and good harvests for all

This was our second time growing weed and cinderella 99. The first time we didn't have the ideal lighting, so we decided to buy better ones and we could see the difference. We decided to test other techniques like main-lining and lollipoping that gave very interesting results. We also made feminized seeds, so we learned to make our own colloidal silver and that also forced us to learn how to clone, which by the way worked out very well. We got three healthy clones and after using colloidal silver they all produced bags of pollen that we used to pollinate the mother plant and some other plants from the grow. Happy with the result, but we want more! Already planning the next cycle and look forward to sharing it!

I'm really happy with how they are doing. This strain or pheno's i got are stacking like crazy, and there's already a Distinct smell around these two. I'm tempted to do a full run of these badgirls in the near future. Rock on Growmies 🌱

02/06/2025, start of week 3, decided to do a bit of LST (tied down main stem) let's see how she responds. Reduced humidity by around 8% to increase leaf VPD to between 0.7 and 1.0 kpa, and lowered the light a little more, increasing to around 300 PPFD for this week. Hoping to see a bit of a rush of growth once she recovers from the LST as I expect flowering will start in the next 2 weeks and need her to fill out a.s.a.p Update 04/06/2025, Looks like I should have probably waited for the next node to stretch a little and then tied her down as I could have brought the top full level with the the other shoots and perhaps encourage better branching as this particular girl doesn't seem to be very branchy, this may change though, will probably have to bend her again but time it better so I can actually tie round the very top instead of one node down and hopefully then encourage some real branching and filling out. Another lesson learned for this rookie. Update: 06/06/2025, fed at 1.2 ec ph 6.2. Update 08/08/2025, end of week, should have waited at least a couple more days to water, she looks over watered, not terrible though and looking better this morning than yesterday morning, will make sure she is properly dry next time.

Week 7 Light cycle=12/12 Light Power=196w Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 56% Low Rh= % Rh step=0% Speed max=8 Speed min=2 Smart controller settings (during lights on). Lights on=10.00am Radiator on= below 21c Radiator off= above 22c Smart controller settings (during lights off). Lights off=10.00pm Radiator on= below 18c Radiator off= above 19c VPD aim=0.6-1.4 DLI aim=35-45 EC aim=1.9 PH aim=6.3 Fri 2/2/24 #1 (Day 43)(Day 5 flower) 📋 raised camera, nearly touching the roof. Sat 3/2/24 #1 (Day 44)(Day 6 flower) 📋 Defoliate a lot of lower leaves. Sun 4/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=bloom nutes. Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=1.0ml/L Terra Bloom=4.0ml/L Sumo Boost=1.0ml/L Roots=0.2ml/L Easy Ph down=0.115ml/L Ec=1.9 PH=6.1/6.5 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L Total volume left=2.5L Total volume used=10.5L Volume per plant=2.62L (Est) Runoff. Total runoff=1.75L Ec=2.4PH=5.9/6.2 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #1 (Day 45)(Day 7 flower) 📋 Mon 5/2/24 #1 (Day 46)(Day 8 flower) 📋 H=69cm D=30cm DLI=41.1 Tue 6/2/24 #1 (Day 47)(Day 9 flower) 📋 Looks like the weather is turning cold again over the next few days. Wed 7/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=water Neutralise=0.1ml/L Roots=0.2ml/L Easy Ph down=0.ml/L Ec=0.2 PH=6.6/6.5 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L Total volume left=2.5L Total volume used=10.5L Volume per plant=2.6L (Est) Runoff. Total runoff=1.5L Ec=1.74 PH=6.6/ 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #1 (Day 48)(Day 10 flower) 📋 H=76cm D=23cm DLI=48.5 HST 1 cola. Thur 8/2/24 #1 (Day 49)(Day 11 flower) 📋 H=79cm D=20cm DLI=50. Raised light 5cm. Lowered power from 200w to 180w H=79cm D=25cm DLI=42. HST 1 cola. She is real bush. There is 1 cola that keeps stretching higher but I keep bending it down. Development is good and she is coming along at a decent pace. Was showing some signs of light stress. Lifted the light and Lowered the power. Hopefully she doesn't stretch much more because the light is almost touching its support bar. Back soon. Take it easy.

**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8

THIS is VLST or Very Low stress training -done neatly. Am i right. Transplanted to 3 gal from 1 gal: so it shall get 3 times bigger am i roit. Flipped to 12 12 hit low ppm auxin will need to hit it with med ppm cytokinin tomorrow probably for extra cheat codes so i can win the contest fairly. Am i roit

This plant is looking great and she responded well to Lst! I chose not to top this plant!