Black Runtz has the best leaves out of all the strains I’m growing right now. The plant has great structure. I have a great feeling about this one

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 ATTENTION GROWERS!!!! BEWARE OF A SCAM COMPANY.... GREEN BUZZ LIQUIDS WILL SAY THEY WILL SEND FREE FERTILIZER BUT THEY MAKE YOU PAY THE SHIPPING WITHOUT TELLING YOU AND THE AVERAGE SHIPPING PRICE IS $100. AND THEY WILL GET ANGRY AND RUDE. THEY TOLD ME TO SUCK IT UP AND BITE THE APPLE🤬🤬 AND THEY TELL ME THIS RUDE CRAP AFTER THEY TOLD ME I NEVER EVER HAVE TO PAY OR WORRY ABOUT FERTILIZER EVER AGAIN... BS YOU RUDE, LYING GARBAGE COMPANY 🗑️ POOR QUALITY NUTRIENTS WITH VERY POOR AND RUDE CUSTOMER SERVICE AND NOT WORTH THE PRICE TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Now I'll show you how to do LST & Defolation on Autoflowering strain You should do all this in the third week of vegetation, after which 90% of the plants will continue to vegetate for another week (5 weeks instead of 4) and grow very large autoflowers

this week has had its ups and downs and if it wasn't for my little apprentice it would have all gone too shit.... she was able to keep everything in the tent stable while i was away!!

Day 64 - Starting week 10 and looking like this will be the last week for this girl. Gonna let her dry up and may do a partial harvest in the middle of the week and let some of the smaller buds build up before chopping the rest over the weekend. Not sure yet though. Day 65 Harvest Day - This girl turned 50/50, cloudy to amber overnight and most leaves are consumed with cal-mag deficiency so decided to do a chop and save what I can. Looks like it’s still gonna be a decent harvest. Chopped her down tonight and started trimming but will finish tomorrow and get a total wet weight. Even most of the tiny nugs at the bottom are pretty dense.

Was a good learning experience. I'm not going to get near the weight I expected from these, and though the bud turned out really tasty, I don't think I'll grow it again. I'm not sure I would recommend to a newbie. It was in some awesome living soil, but some deficiencies crept up in flower, and I wasn't impressed with the roots upon post mortem exam. On second look, even the photo on msnl's site shows some spots that looks like deficiencies. Definitely some grower errors here, but all of my ongoing grows faced the same challenges and these just seemed less adaptable. Anyhow, I've been graced with some clean meds for now, and I'm a happy growin hooman. 👽 I also probably won't do any more autoflowers moving forward. Just not my style. There are some great peeps doing outstanding work with autos though. Best to them and all! :) D82 - 12.12 - cut the second auto cheese yesterday. Let her go as long as I was comfortable. Think her run in with the gnats resulted in the the deficiencies. Awfully covered in trichs, so it should make for tasty smoke after dried, trimmed and cured.. Shall update

Buon 420 a tutti 💚💅🏻🔥😍 da CampaCavallo 🎄🤪💚

Mittlerweile läuft es sehr entspannt da ich nur alle 3 Tage gießen muss. Und die Pflanze in Ruhe lasse. Entlauben muss ich wohl nicht mehr 😜 das reicht wohl bis zum Ende...😂

Gave each medium around 15L water flushing, Will continue to give only water for the next 14 days or so. Flush began 30tht August.

Пережил дефицит Кал-мага и засол почвы почти весь цикл. Справился с этой проблемой, дал не плохой урожай и приятный накур. Реально пахнет конфетами.

On day 1 the plants are looking good. I confirmed that my one cola was seeded, so I removed all visible seed pods. After this run I will do a deep cleaning to make sure there is no pollen in my grow box. The rest of my plant colas seem fine... I changed out my reservoir and adjusted the PH to 6.1. I also dimmed my light to 75% to mimic spring conditions. On day 2 I adjusted the PH of the reservoir down to 6.1. The plants are looking great besides a few fox tails from too much light. On day 3 the PH in the reservoir is 6.2. On day 4 I diluted my reservoir with plain water to lower the ppm down to 400 ppm, and I adjusted PH to 6.2 . The buds are ripening for sure and smell great! I haven't gotten any autumn colors yet even though I have dimmed my grow light and lowered my night time temps. I hope by 8 weeks the plants will have some more purple tones but if not I'm good with the flower quality thus far :). The breeder says 7-8 weeks so I'm hoping I am close to the finish line. I will continue to monitor the trichomes for ripeness. On day 5 I adjusted the reservoirs PH to 6.0. I harvested my seeded cola on Pheno #1 as it had stopped growing/ripening and would be a good tester ;) On day 6 the reservoirs PH is 6.2. On day 7 the PH is 6.0 50 % pistils have turned amber so I believe I have entered my harvest window and expect to flush and harvest soon:) very excited!

Start 3 weeks.14 days

Wie lang das wohl noch dauert, bis die erntereif sind? Und warum werden sie nicht lila? Ansonsten sind sie wirklich sehr hübsch. Wachsen nicht mehr, aber die Buds werden immer dichter. Sie durften angenehm fruchtig. Manchmal wie Fruchteis, abends eher süß aber nie penetrant.

OG 4Q24 Flower Week 7 Orangegasm (Fem) [ IRIE Genetics ] 12/12 @ Bolt (Day 21) Germination: 20 November 2024 #3A Earliest Harvest Date: 9 February 2025 #3B Latest Harvest Date: 19 February 2025 _________________________________________ Start of Week: [Wed Jan 22, 2024 CR2 4Q24 43:F:6:1] End of Week: [Tue Jan 28, 2024 CR2 4Q24 49:F:6:7] OrangeGasm Fertigation: - MAX: EC: [ 2.4, mS] - LightIntensity MAX: [ 850, µMol/m2/s] ______________________________________ __ Wed Jan 22, 2025 OG 4Q24 43:F:6:1 - [x] R&R Each Drip Ring Assembly (Assure NO Fertigation/Bio Build up) Runoff - Amount: [ .5, l] - EC: [ 3.8, mS/cm] - EC∆: [ 1.2, mS/cm] # Danger! Refresh Res (Filtered, pH’d Tap Water) - [x] Amount: [ 2, gal] - [x] Primer A&B: [ 35, ml] - [x] SLF-100: [ 10, ml] __ Thu Jan 23, 2025 OG 4Q24 44:F:6:2 Refresh Res (Distilled Water, pH: 7, EC: 0.0) - [x] Amount: [ 2, gal] - [x] Primer A&B: [ 39, ml] - [x] SLF-100 Runoff - Amount: [ 1.2, gal] - EC: [ 4.3, mS/cm] - EC∆: [ 1.6, mS/cm] # DANGER __ Fri Jan 24, 2025 OG 4Q24 45:F:6:3 Runoff - Amount: [ 0.3, gal] - EC: [ 4.1, mS/cm] - EC∆: [ 1.4, mS/cm] # DANGER  __ Sat Jan 25, 2025 OG 4Q24 46:F:6:4 Dump Res - [x] Remove Chiller and Fertigation Pumps - [x] Dump and CLEAN Reservoir, Note Sediment - [x] Detach Main Feedline - [x] Clean Chiller Pump - [x] Clean Fertigation Pump - [x] Dry ALL Components - [x] REASSEMBLE When Dry - [x] Clean 1/2” Fertigation Mainline Watered In Primer A&B, CalMag Fuel, Silica Skin - Amount: [ 1.9, l] - EC: [ 2.7, mS/cm] Refresh Res w/ Full Hydro (Primer A&B, Silica Skin) - [x] Amount: [ 4, gal] - [x] EC: [ 2.7, mS/cm] - [x] Primer A & B: [ 73.1, ml] - [x] SLF-100: [ 40, ml] Runoff - Amount: [ 0.25, gal] - EC: [ 4.1, mS/cm] - EC∆: [ 1.4, mS/cm] # DANGER __ Sun Jan 26, 2025 OG 4Q24 47:F:6:5 Refresh Reservoir - 2 Gal, EC: 2.7 - [ ] Check, R&R Fertigation Manifold Filter as Needed - [x] SLF-100: [ 10, ml] - [x] Primer A & B: [ 40, ml] Runoff - Amount: [ 1.25, gal] - EC: [ 4.2, mS/cm] - EC∆: [ tbd, mS/cm] __ Mon Jan 27, 2025 OG 4Q24 48:F:6:6  Watered In Primer A&B, CalMag Fuel, Silica Skin - [x] Amount: [ 1.9, l] - [x] EC: [ 2.7, mS/cm] IPM - [x] Spray sides - cover Air holes of Airpot - [x] Spray tops of pots to drench - [x] Dr. Zymes, 28ml/quart @ 85°F - [x] APPLY Mosquito Bits to Top of Containers Runoff - [x] Amount: [ 1.5, gal] - [x] EC: [ 4.9., mS/cm] - [x] EC∆: [ 2.2, mS/cm] # *** Plants Should Be Fried! Need to R&R Pre-Filter again. Fan Flow significantly diminished. __ Tue Jan 28, 2025 OG 4Q24 49:F:6:7  Replace ACI Pre-Filter - [x] Remove Plants - [x] Disconnect Irrigation Emitters - [x] Remove and Rinse Drain Tray - [x] Drop Front of Light - [x] Remove & Replace Pre-Filter - [x] Verify Airflow (Make sure we don’t need to change the carbon in the filter) - [x] Raise front of light to run position - [x] Replace Drain Tray - Reposition Shims - [x] Replace Plants AS THEY WERE - [x] Replace Emitters - [x] Verify Irrigation Runoff - [x] Amount: [ 0.5, gal] - [x] EC: [ 4.8, mS/cm] - [x] EC∆: [ 2.6, mS/cm] # *** Plants Should Be Fried!

Too much N is observed and also some heat as there is an heatwave again and inside the tent it was around 31 c°, i only used half dosis of iguana grow in a light mix and it still seems to be too much, the ppm was around 380 so not sure if its just heat stress, but i think they will be fine, i will just only give water the next week and apply some slow absorbing nutrients on the top of the soil, something like guanokalong or biobloom, im sure they will be fine 😁

Una ceppa meravigliosa, expert seeds fa un lavoro incredibile e magnifico. Dalla germinazione fino al raccolto le piante sono cresciute sane e forti. Purtroppo non potrò assaggiare il risultato, perché non potrò risultare positivo al thc per molto tempo. Infatti mi butterò sulla cbd. sono davvero molto soddisfatto.

Great :) GOOD START-HALF OF THE WORK !!!! The girl looks very good :) so far the small space does not cause any problems, for the first time I see that after you tried cutting off the main head, new branches grow from that place :) it will be really interesting :) I used LST a little until the height of the branches is even, and then I will try to do a scrog :) good luck to everyone :).