This week I Supercrop all the plants and spred them out over both lights. One more week of Veg and they are ready to explode Check me out on Instagram @growmorestressless

Thinking of pulling this whole run at this point, the stems are in a bad way and general structure has really suffered. FIM'd both girls this week & gave compost tea(ecothrive biosys) to aid recovery. Will make a decision on growing them out depending on how they respond. (Update end of week.) So in the first week these girls stretched terribly, instead of riding it out and letting them adjust I tried a trick I've applied with tomatoes in the garden and coiled an inch of the excess under the surface and covered it. After a burst of invigorating from the microbe tea(biosys) these girls seem to be recovering from the stress fairly well. The only down side, the stems have broken the surface and left me with these crazy bonsai style stems & the girls are very short and bushy, concerned the stems won't hold any weight later in life.. Will give this another week and make my decision TLDR; Don't interfere with nature when you can help it, especially with autoflowers. Update day 28 from sprout. Bbk1 showing signs of nitrogen toxicity after perking up, I had to use the bottle measure last week instead of a syringe. Much less accurate so assume this is the cause, just ph water for a while. Bbk2 perking up slightly. I did think these girls looked a funny shape and now I can see the stem properly its starting to make sense 🤦‍♂️🤣🤣

Hi cannafam👋 519growgirl here. Auto Overdose is now 98 days old and by the look of her flower I would say she has around another 3 weeks till she finishes. I added the UVR40 light bars to the under canopy to boost her lower flower production. She has a bit of tip burn so I backed off her Clyde nutrient from 24ml per 6L to 20ml per 6L. I will also be removing CalMag from her feeding this week to ripen her flowers. I will be flushing her with water only for the last 2 weeks. #halfheartcauseyoucompleteme

We have our AK-47 running in a water pitcher lol. Honestly because i wanted to try a transplant and wanted to see the roots develop on Autoflowers. Also, we were out of planting pots when we transplanted. 😬🤦‍♂️ The pitcher is filled with Fox Farms Happy Frog soil. So far AK-47 is very fast. Transplant didnt stunt her at all. (From jiffy cube into soil) When I transplanted her we made sure her taproot was still inside the netting of the Pod.(just an observation) Stats: Vivosun 2x4 tent 1Gal water pitcher Fox Farms;Happy Frog soil 2x viparspectra 600w refractive LEDs Durabreeze carbon filter 4" inline fan

LJ4Q23 Flower 9 SOP LJ4Q23 - 8-Plant SOG from Cuts Harvest Window - Earliest: 2024.02.01 - Latest: 2024.02.10 Objective: - 8 Plants - Single Colas - No Branches - Harvest Lemon Jeffery (Narrow Leaf Phenos): 70±5 days - Light Intensity - Ramp up from 200 - 40 DLI, at 13 hour ScotoPeriod, will need MAX Light to Achieve ______________________________________ Start of Week: [ 2023-01-24, LJ4Q 57:F:8:1] End of Week: [ 2024-01-30, LJ4Q 63:F:8:7] Plant Height: [ 21, in] Temp: [ 78, °F] RH: [ 61, %] VPD: [ 1.2, kPa] Light Intensity Peak: [ 850 , µMol/m2/s] Light Distance: [ 11, in] Environment Targets (Flower 7 - 9): - Scotoperiod: [ 13, h] # Contiguous dark hours daily - TemperatureMax: [ 78, °F] - RH: [60, %] - VPD: [ 1.1, mS] - LightIntensityMax: [ 1000, µMol/m2/s] - LightDistance: [ 8, “] Fertigation Plan: - RLA Hydro Chart, EC 2.0 - 1.1 - Primer A: [ 6, ml, gal] - Primer B: [ 6, ml, gal] - Silica Skin: [ 2, ml, gal] - Resin Bloom: [ 2, ml, gal] Penultimate 3 Days (before Harvest) - RLA Resin Bloom, EC: 0.8 __ Wed Jan 24, 2024 LJ4Q 57:F:8:1 - [x] EC: [ 3.3, mS] - [x] Runoff: [ 500, ml], [ 62.5, plant], [ 15, %] Estimate 440 ml/plant/day (10% of Container Volume) Confirmed 1 min increase in event duration yields Runoff 200 ml/day @ 5 Minutes, we’re delivering 1 Liter per event, 6 Liters per day TOTAL, .75 Liter/Day/Plant Refresh Reservoir - [x] EC: 1.8, 2 Gal - [x] PrimerA: [ 9, ml, gal], [ 18, ml] - [x] PrimerB: [ 9, ml, gal], [ 18, ml] - [x] Silica Skin: [ 4.5, ml, gal], [ 9, ml] - [x] Resin Bloom: [ 4.5, ml, gal], [ 9, ml] - [x] Photosynthesis Plus: [ 6, ml, gal], [12, ml] - [x] Quillaja20 Powder: [ 0.5, tsp, gal], [ 1, tsp] - [x] SLF-100: [ 5, ml, gal], [10, ml] __ Thu Jan 25, 2024 LJ4Q 58:F:8:2 - [x] EC: [ 3.4, mS] - [x] Runoff: [ 600, ml], [ 62.5, plant], [ 15, %] - Reduce Fertigation Duration :30 per event Runoff Estimations - RunOff Total/Day: [ 500, ml] - RunOff per Container/Day: [62.5, ml] - Estimate 10% Irrigation/Day: [ 440, ml, plant] - Runoff %/Day: 62.5/440: 15% Estimated Deliver/Plant/Irrigation - Irrigation: [ 440, plant, day] - Runoff: [ 62.5, plant, day] - RunoffPCT: [ 15, %] - Total Irrigation/Day: 3.6, liters, Day (Just Shy of 1 Gal/Day) TempAvg: [ 79, °F ] RHAvg: [ 59, % ] VPD: [ 1.12, kPa ] PPFDAvg: [ , ] LightDistance: __ Fri Jan 26, 2024 LJ4Q 59:F:8:3 - [x] ECReservoir: [ , mS] - [x] Runoff: [ 600l+, ml], [ , plant], [ , %] - [x] ECRunoff: [ 3.4, mS] __ Sat Jan 27, 2024 LJ4Q 60:F:8:4 - [x] Back off Light 1” (3 Clicks) - [x] Runoff: [ 600, ml], [ , plant], [ , %] - [x] ECRunoff: [ 3.5, mS] __ Sun Jan 28, 2024 LJ4Q 61:4:F:8:5 - [x] Runoff: [ 500, ml] - [x] ECRunoff: [ 3.3, mS] - [x] Med (2.7) chart for EC: 1.5 - [x] Primer A: [ 8, ml, gal], [ 16, ml] - [x] Primer B: [ 8, ml, gal], [ 16, ml] - [x] Silica Skin: [ 5, ml, gal], [ 10, ml] - [x] Resin Bloom: [ 6, ml, gal], [ 12, ml] EC: [ 1.6, mS] __ Mon Jan 29, 2024 LJ4Q 62:F:8:6 - [x] Runoff: [ 500 , ml] - [x] ECRunoff: [ 3.3, mS] __ Tue Jan 30, 2024 LJ4Q 63:F:8:7 Refill Res: ~2 gal - Primer A - Primer B - Silica Skin - Resin Bloom EC: [ 1.3, mS] - [x] Runoff: [ 475 , ml] - [x] ECRunoff: [ 3.3, mS]

Training still going well. Top is pretty even with some slower lower branches I may remove. Have a mite problem so I introduced 5 ladybugs that immediately went to work on the soil and leaves. Watering when dry but may end up transplanting into new soil if the bugs keep on bugging. Continued training a bit and decided to defoliate and take off some of the lower branches lacking growth. Continuing to water when dry while preparing to add more nutrients for flower production. Hoping she takes it well!

It's almost Christmas time, I would like to wish you a happy Christmas , a big harvest and all the best for you ✌️ Peace ✌️ fck corona ✌️we have our medicine to survive 😁

These are clones that I managed to take from my summer garden that became a disaster due to a heat wave that we had breaking 100 year records. I expect everything to be 48” in height at maturity.

Week 10

-SOAKING SEEDS STARTED AT 4:15PM on 4/2/22 All of them sank by the next day with a little stirring of the water - most of them were floating before I stirred the water then they sank & stayed underwater. -PLANTING SEEDS STARTED AT 6PM on 4/3/22 Seedling Starter Soil: 1 Coco Coir Block (hydrated with 12cups aquarium water) About 5 cups Vermiculite 4Tbsp Down To Earth Starter Nutrients Mycorrhizal Fungi Spring Water - watering the hole with mycorrhizal before planting seed & then again after planted. -AFTER THE FIRST SPROUT ON 4/5/22 Turned on seedling clip light to blue only, dimmest setting @ 20%. Keeping light on for 18/6 6am-12pm - 4/6/22 INCREASED BLUE ONLY SEEDLING LIGHT TO 50% It seems like they were slightly stretching for light **watch for light burn on cotyledon leaves** -4/7/22 MORNING INCREASED BLUE ONLY SEEDLING LIGHT TO 100% The plants are stretching even more I increased light to full 100%, it'll have to keep an eye on them & make sure they don't get light burnt or topple over from reaching -4/7/22 AFTERNOON SWITCHED LIGHT TO GIIXER The two tallest plant cotyledon started to droop to the side so I didn't want to take a risk continuing to try the clip light only on blue @ 100%. I have the Gixxer on only veg at a distance of 10" away from the tops of the cotyledon leaves. I also cracked the lid & put an oscillating fan on low just to give them a tiny bit of movement to strengthen their stems because they'll be tall and weaker with stretching. *I tried using a new seedling light & it was a failure - they are now stretching due to that light. I switched back to my trusted seedling light & hoping they'll be back on track.*

patiently waiting

Well, she keeps stretching, but I feel like this may just turn out to be a tall plant 😂 ... normally I'd be saying yay, but with my 4.5 foot tent (not including my light and filter) this is going to be a struggle! Should be fun nonetheless. I'm also interested with how spread out the structure is on this girl compared to every other auto I've grown to date, which have been more bushy and struggling to get any light to the lower bud spots. Get ready for the ride 😎

Pfff, explicaros que estas green ak xL son una variedad bastante difícil de cultivar, los cambios ambientales le sientan fatal, y hay que tener cuidado con la alimentación ya que se Sobrefertiliza fácilmente así que ojo, eso por un lado. Por otro si eres un cultivador con varios años de experiencia y todo te sale bien, es probarla, porque el sabor de esta cepa compensa la dificultad de su cultivo. Thc hasta 18% , sativa predominante. Genéticas: Afghan x Colombian x Mexican x Thai Landrades.

WEEK 13 Both plants have now entered the flowering phase. A large number of pistils have already developed. So far, I’ve managed to maintain an even height, but the plants are currently in the stretch phase and could still shoot up significantly. I’m hoping for compact and balanced growth, as the vertical space in my setup is limited. I’ve increased my light intensity to around 700 PPFD. As a result—and due to the dehumidifier—the temperature in the grow room has risen slightly, but it remains within an acceptable range. The plants are currently watered every two days, with fertilizer added once a week. To improve air exchange, I pump fresh intake air into the tent every 30 minutes for 30 minutes. The coming weeks are bound to be exciting—I’m really looking forward to seeing how things turn out

🌱✨ Super Sativa Seed Club Germination Report! ✨🌱 Hey fellow green thumbs! 🌿 Today, we're diving into the exciting world of germination with our latest run from Super Sativa Seed Club. Buckle up, because it's going to be a fun and informative ride! We started our germination journey with the trusty Cannakan method. This approach is a game-changer for seed enthusiasts looking for robust and quick germination. Here’s how it went down: Initial Soak: Our seeds (Auto Fast Pete and Auto Northern Dragon Fuel) took a luxurious bath in water for about 30 hours. This soaking period is crucial as it wakes up the seeds and starts the germination process. 🌊🌱 Once our seeds had a good soak, we moved them to soil. This transition is where the magic really begins! The seeds were carefully placed into a rich, well-draining soil mix to ensure they had the best start possible. 🌟 Genetic Breakdown: 1. Auto Fast Pete: Lineage: This auto-flowering marvel comes from a lineage of speed demons, known for their rapid growth and resilience. Characteristics: Expect a robust plant with a quick life cycle, perfect for those looking to get results fast. Auto Fast Pete is renowned for its sturdy structure and abundant yields. Flavor & Effects: With a sweet and spicy profile, it’s a treat for the senses. The effects are balanced, offering a pleasant, uplifting high that's perfect for any time of the day. 2. Auto Northern Dragon Fuel: Lineage: A powerhouse combination of Northern Lights and Dragon Fuel genetics, this strain is all about strength and vigor. Characteristics: Known for its impressive growth and high resin production, Auto Northern Dragon Fuel is a cultivator's dream. It has a slightly longer life cycle compared to Auto Fast Pete but rewards with larger yields. Flavor & Effects: A complex blend of earthy, pine, and fuel notes, it’s both intriguing and satisfying. The high is potent and relaxing, making it great for unwinding after a long day. 🌱🌿 What to Expect: Fast Growth: With Auto Fast Pete, you’ll see rapid development. It's like watching nature's express train! Resilient Plants: Both strains are known for their toughness. They handle stress well and are forgiving to minor cultivation errors. Impressive Yields: Expect a bountiful harvest from both strains. Auto Northern Dragon Fuel might take a bit longer, but the wait is worth it. Aromatic & Flavorful Buds: Get ready for a sensory delight with rich, complex aromas and flavors. 🌍🌟 Conclusion: Germination is just the beginning of our exciting journey with Super Sativa Seed Club's Auto Fast Pete and Auto Northern Dragon Fuel. These genetics promise not only a rewarding cultivation experience but also top-notch end products. Whether you’re a seasoned grower or a curious newbie, these strains offer something special for everyone. Stay tuned for more updates as our plants grow and flourish! Happy growing, and may your gardens always be green and bountiful. 🌿💚✨ Germination method 🌱 @thecannakan Genetics @supersativaseedclub_official Nutrition @aptusholland 🌿 @aptus_world 🌎 @aptus_es 🌍 @aptusbrasil 🌱 @aptus_thailand 🌿 @aptus_portugal 🌳 @aptususa_official 🍀 @aptusplanttechnz 🌺 @aptusplanttechaus 🍃 Ambient controls🎮 @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro Soil @promix_growers_eur @promix_cannabis LED - @lumatekeu Watering- @autopot_usa @autopot_global Love and attention- @dogdoctorofficial As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 More info and complete updates from all my adventures can be found ⬆️link in the profile description ⬆️ Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All 💚 #SuperSativaSeedClub #GerminationReport #FastPete #NorthernDragonFuel #PlantMagic #GardeningJoy #NatureLovers #PlantPower #Inspire #GrowYourOwn #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trolmaster #trolmastereurope #trolmastersecrets #Autopots #sssc

Week 8 Here came fall. End of last week plant seemed hungry, the fade wasn't progressing as supposed so I gave her two nutes round with only water round in between them. I used bottled feeding: biobizz biobloom + top max (2ml each per liter), ghe ripen (2ml per liter), solved micronutrients and calmag (not mixed, one time one the next the other, 1-0,5 ml per lt). Solution EC was about 1,4, starting with 0,3 tap water. She reacted well to the feeding in my opinion. now the fade is progressing more naturally. I did observe that the plant under the less powerful COBS in the same tent are doing better then the ones under the sp250 wich has a higher par output, so I raised the light to 45-50cm from canopy. This had a positive effect on the plants imho. I'll stay a little bit further from the beginning in my next grow. I took a sample under the microscope to take some tricho pictures, they look beautifully clouded but the buds still has to ripen some 50% more. Based on that I think we are arriving to an end in 10-15 days max. Happy bottanic guys

the headbuds of the rainbow triangle were already harvested with the other plants (Forbidden Nectar and Sunset Kush Pop Clone), as one of the thick headbuds had already a little bit budrod We left the rest of the plant for another week. During this week, the lower buds really put on weight again. The head buds are already dried and will be cured. The rest has now been hung up to dry.