Got these beans from a festival and they are from 501 genetics based in Thailand (or malaysia i stand corrected apologies) and these are fire 🔥 hope and pray i got seeds so i can experience this journey once more. Fire 501 Genetics well done

my dry and cure style is this: 4 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 4 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. buds are one of the hardest as fucking rocks type of buds! very dense , compact , sticky , smelly , amazing at every aspect growing stage was 60 days and flowering stage was 70 days total (harvested tops at day 63th) the total weight of dry buds was : top buds 174 G + lower buds 55 G = 229 G my overview of strain with details: the seeds: unfortunately i only got 1 seed cracked out of 5 so i will not know how much this genetic can get different but at least i got the chance to grow once of this wonderful strain the plant : in every stage you can ensure that you are dealing with a high level plant , she will get big so you have to control her height LST and SCROG highly recommended , will grow very well with tick stalks and big fan leaves , has good resistance for stress and will respond very well to stress trainings , she really has gorilla power in herself , fresh buds on plant : buds are very compact and dense even from start , fresh blossoms smells like pineapple and mango , 2 different shades of sweet smells like you hold 2 junks of pineapple and mango in your hand and you smell them together, she is a trichome and resin factory , very very sticky , very oily , strong smell dried buds: very compact and dense , hard as rocks , has dark colors with purple hues inside it , it smells sweet smoke : very smooth and sweet like lollipop , pineapple , mango like , after 2 minutes it'll kick in and you'll get higher and higher with every breath , has a strange and especial high mind high mostly

Last week before flushing🌈

The plants react well to the switch to 12/12 and continue to stretch and fill out their grow space. They love the Advanced Nutrients feeding schedule and have a healthy green color all over. The first signs of flowering (=white hairs) start to appear and both plants are female (as expected from feminized seeds). Barbarian (=AK-47 x Barbara Bud) plant #2 is appr. 12 cm taller than plant #1 at this time.

Last time they get nutes

I harvested the 2 last gorilla Zkittlez and 1 blue sherbet x purple punch. One gorilla Zkittlez was more one the sativa "shape". I let the buds dry on a net during 3/4 days after that few days in a wood box. After few days pit the buds on a jar with an hygrometer.

Buenas noches familia, ya estoy de vuelta para enseñaros la tercera semana de crecimiento de las critical a granel. . Lo primero, se han trasplantado a final de semana a su depósito real 11L. . La humedad anda entre 60/70% la temperatura está entre 23/26 grados, el led es increíble , y como siempre el ph , ya que es de lo más importante,está en 5,8/6,0. . AgroBeta: 0,8 ml x L Growth black line , vía radicular. 0,2 ml x L Tucán , vía radicular. 0,15 ml x L Flash Root , vía radicular. 0,05 ml x L Gold Joker, vía radicular. . Esto es todo fumetillas, muy pronto las veremos echando flores 💨💨💨 buenos humos.

They seem to be settling in well and starting to kick into growth mode. All but 1 of 17 had roots in the water when I brought them over from the Cloner. The 1 holdout is finally dropping roots now and they’re almost in the water. I’ve been using a syringe to wet the bottom of the net pot to encourage downward growth and to keep the emerging tips moist. A bit of root discolouration, but I’m reasonably certain this is just runoff from the Root Riot starter cubes I wrapped around the root crowns. I’ll let them gain a bit more height then too them. I’m thinking I’ll do a clean 4 cola per plant configuration.

After 2 weeks I chose my favorite plant of the three and prepared her for the Autopot. Now she needs to root this pot for another 2 weeks before we can turn on the Aqua Valve and the tank. DLI 30

I started germination of 1 orange sherbert bean on 29/12/2020. I pre moistened my rockwool cubes with ph balanced water to 6.4. Made sure the plug was just damp and not soaked. Using a small wooden dowel I increased the size of the plugs pre made hole. Than I sowed my bean into the hole. Ripped off a small piece of rockwool and mulched it up. Lightly filled the hole in with the mulched rockwool. Than stuck the plug into a misted humidity dome, to complete germination. Shouldn't take anymore than 4-5 days to see a sprout. Once I see some cotlydon leaves bursting to the surface. I will get the plug planted into some 1 gallon pots. Plus get this lady situated into her home. Cant wait! Some Background information on history with Orange Sherbert. I have grown orange sherbert out 3 times and all times had the same result. A shorter extremely branchy robust plant. That dominated the room. Loves training and really ups yeilds doing so. She produces an amazing canopy... just a sea of daggers. Her huge chunky colas pack and amazing orange tangy aroma and just taste like heavenly candy! Barneys Farm hit the nail on the head with this variety! She tends to have a little higher demand for potassium mid flower than most varieties. So a bit heavier on the pk booster and she will be mighty happy! Just a fabulous strain to work with.

Flowering day 73 since time switch to 12/12 h. Hey guys :-) Finally the time has come . The lady was harvested and hung upside down in the dry tent 😍. Before that, she stood in the drying tent in complete darkness for 2 days and the large leaves were removed. The small leaves stay attached during the drying process so that they protect the buds and allow them to dry more slowly and evenly :-) . In the dry tent, the temperature is 18-19.5 degrees and the humidity is 54-58% 👍. In this environment they are now allowed to hang for 10-14 days before they are fine-tuned and trimmed clean by hand. then after trimming they come to ferment for 6-12 weeks in dark jars with bobeda packs 62% to keep the perfect humidity. After a few weeks, the Boveda packs 58% are used so that they can slowly dry out :-) . Of course there is one last update after trimming. Until then, I wish you a lot of fun with the update. Stay healthy and let it grow 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://gardenofgreenseedbank.com/candyland/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

Clones are coming around they was shocked being up in Maine we had a light out for 3 days got too 40° in the cloner etcetc sooo trying to get them to root just gave them some clonex ✌️

The plants are settling into their new shoes. They have just had water and elite 91 roots as there is some Greenhouse Bio Grow in the soil mix. I am going to try and make some KNF nutrients this week to boost the growth phase.

I like to defoliate well just before flower especially lower parts to expose bud sites so light gets trough and some larger top leaves but not too many so I don't shock the plant too much

9 out of 10 seeds germinated 4 x WW and 5 CSC. Germinated in paper towel then moved to easy plug sowing kit then to small pots coco coir 30/70 ph water only. Bit of stretch as under a low powered led that was set too high. Now under Spider Farmer 300 watt led set at 25% at 12 inches. Best of the bunch will go to Autopots x 6 running GT nutrients veg 2 part and Great White Premium Mycorrhizae. Under Mars FCE 8000 and CO2 system with inkbird icc-500t controller. Controller is a nightmare to program with the poor manual. Hoping to set at 800 ppm for veg stage.

Flushing with pure r20 ph@ 7.4 Flushing about 10g of water per plant until Overflower water comes out clear One more week of flushing and will harvest on the 16th week

Started today second week (20/05). Very pleased with how it grew the first week. The plant appears healthy despite the excessive lengthening that caused its release due to the too much weight of the leaves. Although it has a fan pointing at it, I still expect it to reinforce the stem to remove the support. Update: Very strong stem. 20/05: Root Complex (3.5ml/700ml) + TNT Complex (3.5ml/700ml) --> Final EC 625 24/05: Root Complex (3.5ml/700ml) + TNT Complex (1ml/700ml) --> Final EC 325 27/05: Coming home after two days i found my baby plant that now isn't just a baby! Beautiful and strong! I've noticed only a small spot in a leaf, highlighted in the video; and a strange skin around the stem, highlighted in the other video.

Day 85: First Grow We’re entering a new week, and it’s exciting to see the progress in our first grow. The plants are thriving, and the buds continue to get thicker and frostier. The formation of orange hairs is becoming more pronounced, indicating that we're on the right track. This week, we’ve decided to order a microscope to monitor trichome development more closely. Additionally, we're considering adding CANNAZYM to our feeding regimen to support bud growth and overall plant health. Let’s keep pushing forward and make this a successful grow!

9/17 Didn't know this was a new week or I would've taken more pictures. I'm glad I took those two plants. As it dries and I start to trim I could see where it could've turned to rot real easy. It rained enough last night to soak all the girls. The two bottoms I harvest look like the have pm on them. If so I'll wash it or through it in the concentrate bag. Found a few colas a dropped which will go in the concentrate bag. Scoping the toasted toffy and the event horizon and the both look AMAZING! I've scoped the others and I'm extremely impressed. They may be difficult to grow strains but they have high cannabinoid content. The sherb cream pie has really come to life and turned totally purple with beautiful flowers. The girl in the 50 has several soda can sized buds. I hope this weather holds up. I don't like flowers this size getting wet. The sativa leaning hydrid us the only one I may have trouble with. It's only in a 10 gal but it's enormous! If needed I coyld bring it inside at night. The buds look like cat tails. I'm used to growing indica dominant strains. Plant us super healthy though. I'll be intrigued jail for a while and I've gotta make contact with whoever is going to do my extracts. I'll keep this updated. It's a lot of work bur it's worth it. 9/18 WATERED EVERYTHING I GALLON BUT THE BOTTOMS OF THE 2ND EV AND THE TT WHICH EACH GOT A HALF. Since harvest I've noticed some pm spring up on the toasted toffy. Looking at the other event horizon through a scope the trichs are all milky with some amber. I'm just waiting for A LITTLE more amber. And for me to have time and or room. I decided to harvest the tops and majority of one of my event horizon and toasted toffy. Today during an inspection I found a couple grey mold branches and some botrytis on my big GMO on the back. This plant is done. It's by far the furyhest ahead. Septoria effected the yield a little but pistols were retracted and amber was at like 10%. I thought about it and I watched the plant next to it with the pm have a branch I supported just "slough off". Right in my face. I figured if there was a sign tjis was it. I cut that rot off and put the buds from the branch in a bag and froze them then I went around and harvested the limbs on the other plant that were furyhest along. I took about half of it. I could've taken more and maybe I should've but I'm tired. I also noticed a couple spots of grey mold on the plant in the 50. All the leaves were falling off. I finally scoped it and it was right whetr I wanted it to be. Looking at the colors I'm glad I spent so much time the past few days. That one I hung whole. The sherb cream pie has something eating the fresy shoots (probably ear wigs. But the buds are fattening and the trichs aren't quite there. I'm going to let the rest of this stuff go ad long as possible. With the exception of the other event horizon. I finally tried it. It's fucking killer. I could take that plant now. The only reason I'm not is because I have to much work on my husband's as is. I'll do some videos amd pictures but I'm tired as fuck. Got to try event horizon. Very fucking impressed! 9/19 The past 3 days I've been working 5 a.m. to dark. I went back and harvested the bottoms of the toasted toffy and event horizon 1. After injury from harvest they contracted wpm. I used this as a learning experience and put some away in the freezer for concentrates and used a peroxide and water bucket. That's what kills the p.m. anyway. I hung them and they spun in the wind. I blew them lightly with a leaf blower before putting them ok strings I had previously setup with a fan in front of it. I kicked ass today. Toasted toffy got sampled and did NOT disappoint. I had it in a jar though and it was green so I'm not counting this. I do have some dry. I have indoor left too. Like in the video that one GMO looks like it's fucking dying or something. I'd rather cut it and use it for concentrates if it effects my healthy plants. I just checked on that plant in the 50 I hung. It looks amazing under the scope and smells better. Decisions, decisions. I do have a few calls I should make sooner rather than later. We are supposed to be getting rain. 9/20 The past 3 days have been hard. The wife's medical stuff is acting up and I had to tend to harvesting a few. My whole body hurts. I even did my first bud wash yesterday! The ev and tt I took and left some buds on ended up covered in pm. So I decided fuck it and tried bud washing. I also froze some for extracts. Speaking of which I need to male contact with whoever I'm going with this year because I think I've reached the point of diminishing returns on that dieing GMO. When it comes to grey mold and botrytis I don't fuck around. Winds are really high today. Putting the scope to the sherb pie is making me second guess myself too. Oh well. It's not going to rain today. And if needed I can move them in the barn. If I get ahold of Mt processor I'll chop that GMO and bring it right there. The other thing is that I've got tons of weed and a lot of its hanging so I've gotta find someone that will do a batch of live rosin then like a elbow of dry. This is the best part of the year. We'll It's supposed to be. Cutting down good plants us bittersweet. I don't mind chopping that one gmo a little early though because it's close to hitting the point of no return. That little sativa dominant hybrid in the ten is HUGE! The buds are swelling like crazy too. It's got a COUPLE septoria spots but this thing is resilient and easy to move around. This will finish perfectly. So far I'm happy with what I have. I'm GRATEFUL. The two September plants I tried were GREAT. A 90/10 and an 80/20 and they both suprised me and got me exactly whete I wanted to be. I'll keep things updated. I did a video I'll upload. 9/21 Weather is still great and the buds don't even seem wet in the morning. The thing is is that something (rot or ear wigs probably both) have stripped lower interior branches. In some cases stripping them ENTIRELY or chewing the stem right off. It wasnt happening to my favorite GMO or the one in the 30 and the like on in the ten. The Sherb pie I noticed grey mold on 3 different branches. Last time I checked trichs it wasn't ready but I've got to get a handle on this mold/pests or it's going to he taken a little early. We have incliment weather coming Wednesday I think. I'll bring the 10 inside and if I have to I'll bring that perfect GMO in as well. I'm going to scope everything again today. I called a bunch of extractors for prices. I was going to do fresh rosin and just yank and drive but that is looking to be harder. I can get badder made CHEAP from a reputable lab. I think I'll do that. They prefer dry and that way I could through what's left from last year in there. I have this other one GMO that I've had the same issues with. I'm sick of removing bud rot or having to cut interior branches off due to pm. Tried toasted toffy and it was fucking amazing. I'm planning on trimmingvthe ev and if I finish I can bring the other one in. It's done. It's not getting any bigger. Trichs aren't changing. That GMO I am going to scope when I get home and it will be coming down in the next couple days. Otherwise I'll end up with half of what's there. The GMO I took the tops from is finishing up too. If I scope that and it looks decent and I have the time I'll take the remainder. I'm leaning towards doing at least a lb dry for extracts. I've got some frozen. I've got some hanging and most is still in the ground. I sleep on all major decisions. However, I know getting my nice buds soaked when I'm already losing shit to budrot and grey mold isn't the smartest thing. I'll probably take what I can and bring the others inside to keep them safe. I didn't think I'd have this much quantity. I knew quality would be good but this isn't a bad year quantity wise either. I'll keep this updated. 9/22 Busy as hell! Rain coming Tuesday. After a final check of the scope and the flowers and I took the GMO that all the leaves had fallen off of. That plant is going straight to extracts with the one in the thirty. I also "finished" harvesting that GMO that was furthest along. Trichs were getting amber. Been in trim jail. Was going to take the Sherb Pie but I'm not seeing amber yet. I did have to cut off some branches that had rotted. I'll keep an eye on it. It will come down when it's ready. It just sucks losing little bits of it. My favorite GMO is sooooo close to perfect. I should just take it but I'll wait. If we get rain I'll bring that and the sativa looking one in the ten is the barn. Back to work now. Before I forget what strain is what lol. 9/23 Still busy as fuck. I chopped the other event horizon amd hung it whole. It's DONE and it doesn't need to go through the rain storm. I also took the majority of the GMO early pheno. What's left will get plucked off and used for extracts. The big one in the 50 is getting dry. I have finished the event horizon and I'm not "finished" with the toasted toffy but I have it in 5 gal buckets with a food grade lid so u can at least cure correctly. The gmo is still hanging. I'm wondering whether I should wait it out or chop. I'm gonna take care of what I have inside first and hope that shit doesn't eat my plants or that it doesn't rot off. That perfect GMO has one branch with some grey mold. I might cut it off. I'll keep this