It's the second time i grow OO. They were so frosty and tasty, need more.

Hola asi vamos con las niñas en esta semana , muy contento con el resultado visual que se esta viendo en el cultivo , las plantas están muy resinosas con un aroma muy rico de oler. Ya paramos la fertilización para empezar solamente con agua hasta sus días finales , no se ocupara ningún aditivo de limpiador de minerales , esperamos que consumas sus reservas estas semanas y así obtener el amarilleo final 👌 Hello, so we go with the girls this week, very happy with the visual result that is being seen in the crop, the plants are very resinous with a very rich smell of smell. We already stop fertilization to start only with water until its final days, no mineral cleaner additive will be used, we hope you consume your reserves these weeks and thus obtain the final yellowing👌

Day 8 Flower (Day 50) The first day of the second week of flower and the strech is real. The right girl is getting pretty damn big and keeps on drinking a lot. I gave her another 3 liters of pH 6.4 water today. On the other hand, the left girl drinks hardly anything, so I didn't need to water her. I also did some lollipopping today and got rid of a whole bunch of undergrowth. I saved some clones off the big girl but no clue what to do with them. We'll see what happens. Day 9 Flower (Day 51) Chill day today. All I did was to give each girl 3 liters of pH 6.5 water and snap a few pics. Day 10 Flower (Day 52) Today I finally got around to re-organize the small tent to move the light as high up as possible to give the canopy some additional space. I moved the exhaust fan to outside the tent, so it was out of the way for the light, and then put the circulation fan below the canopy, blowing upward. Finally, I adjusted the light so it was reading about 900 PPFD in the center of the canopy. The left girl didn't need any water today, but the right girl got 3 liters of pH 6.2 water. Day 11 Flower (Day 53) They're back! The fungus gnats are back in the tent, although I'm not surprised, and let me tell you why. When the light for my tomatoes and peppers broke down, I had to move them so that they get some daylight. It is still cold here (the coldest May around these parts ever, I think), so they have to stay inside even though they usually would have moved outside long ago. The best place to keep them in my apartment is by the window in the same room as my grow tents. The last time I had gnats, I only had enough nematodes to treat my girls, but I didn't do the rest of the apartment even though I should have. So currently, my peppers and tomatoes all have a ton of gnats. Put plants with gnats in the same room as your grow, and it is only a matter of time before the gnats find their way into the tents. So yeah, it wasn't a surprise at all when I noticed the gnats in my tents some days ago. I put up some yellow sticky traps to deal with the adults and ordered more nematodes, enough to treat my girls, plus all other plants in my entire apartment. Twice. The nematodes arrived today, and I mixed up 10 million of them into 6 liters of water and gave each girl half at pH 6.5. That was it for today. Day 12 Flower (Day 54) Exhausting day today. I opened the tents, took pics, closed the tents. Phew! I think I need to lay down for a bit. Day 13 Flower (Day 55) Late last night I decided to supercrop the right girl to slow her down and get the canopy to even out. We're almost at the end of the second week of flower so this is the last training I will do besides some defoliation later on. I think I cropped around 10 branches or so. Today, most of the branches were already standing up again and she was VERY thirsty so I gave her 4.5 liters of pH 6.4 water. The left girl on the other hand didn't need any water. Day 14 Flower (Day 56) The last day of the second week of flower and the right girl is in flower. Early yet so still small and no smell, but they are there. The left girl is in flower as well but isn't as far along, but that isn't unexpected considering the different lights. The left girl is 68 cm tall (18 cm increase in a week), and the right girl is 100 cm tall (23 cm increase in a week) but would have been even taller without super-cropping. I gave each girl three liters of pH 6.3 water and removed the tape from the right girl's broken branch. She looks fully healed, so I removed the supports as well, and she was looking great. However, thinking about it for a second, I put back one of the supports, just in case.

Introduction - Week 14|07 Summary - Ensign's log, stardate 9437.65, Great week of growing! Wow what a good week! Growth in the main tent has all around been incredible! Submitted my first submission to the Global Grow Cup! Filmed a video of the solo cup container (marked with the ticket/order number) that will be used for the competition. Also had to fill and prove the solo cup holds 2 cups of soil. Now I need to root a clone (for the first time), transplant her into this cup, and submit my 2nd entry before the 30th of this month. As far as my first attempt at cloning, have already begun the rooting process! Managed to take cuttings from 3 out of the 6 phenos in the main tent (the first cutting was also my first time topping). Soaked the cuttings for two days before planting them into Coco Coins. So far everything has gone surprisingly well! The clones are now rooting under the propagation dome with the vents fully closed. Will check for roots soon! At the end of the week, growth was just raging! Was planning on flipping to flower in a week, but decided to begin the first week of flower next week! Thus this is the last week of veg. Plan to flip to 12/12 next Monday! Onwards to next week! [START OF WEEK 14|07] ========================================================== Garlic Budder #1 - WEEK 14|07 - Full Veg Wk5 Garlic Budder #2 - WEEK 14|07 - Full Veg Wk2 Garlic Budder #3 - WEEK 07 - Full Veg Wk5 Garlic Budder #4 - WEEK 06 - Full Veg Wk4 06/03/24 → 06/09/24 This Week's Estimated Goals ---------------------------------------------------------------------------------------------- DLI: ~26 mol/m²/d PPFD: ~400 μmol/m²/s VPD: ~1.0 kPa This Week's Meter Readings & Averages [Lights On: 16:00 - 10:00] ---------------------------------------------------------------------------------------------- DLI: 24.56 mol/m²/d PPFD: 379 μmol/m²/s VPD: 0.91 kPa Soil %: [32.7, 37.6, 37.9, 34.1] ========================================================== Day 01 - Monday - 06/03/24 - Total Days: 098 ----------------------------------- Daily Averages [~23:00] - Temps: 80.7°F [27.1°C] - Humidity: 74.4% - VPD: 0.90 kPa - Soil %: [31, 34, 39, 35] ----------------------------------- - [09:57]: Quick morning check! --- #1 is looking a bit droopy, but almost lights off (at 10:00) so not concerned. --- Nice! Mainly wanted to check on #4 and she is looking great! She’s perked back up and looking good! - [23:08]: Evening check. --- Wow! It’s a jungle in here! --- #1 has gotten too big? Nah!? Keep on growing girl! --- #2 is growing and definitely getting bigger! Growth just looking really weird. --- #3 has continued to get larger and is looking quite uniform in growth! --- #4 is growing and looking perky again! --- Even the original #1 and #2 phenos (in the back) are looking good! --- Wow! #4 is really getting close to the light. - [23:14]: Checked down both fill tubes. --- Both reservoirs were completely dry! - [23:27]: Checked the Ecowitt soil moisture sensor data: --- 30% - [CH01 EB1 - Garlic Budder #1] --- 34% - [CH02 EB2 - Garlic Budder #2] --- 39% - [CH03 GFP - Garlic Budder #3] --- 32% - [CH04 FPT - Garlic Budder #4] - [23:32]: Poured 4 cups of distilled water down EB1’s fill tube. --- Poured 2 cups of distilled water down EB2’s fill tube. - [23:38]: Checked the humidifiers. --- Refilled the 4X4’s humidifier with distilled water. --- Tomorrow, plan to defoliate and start cloning for the first time! --- Going to take multiple cuttings from both #1 and #4 for sure, but still deciding on the rest. --- Getting hyped! Day 02 - Tuesday - 06/04/24 - Total Days: 099 ----------------------------------- Daily Averages [~23:00] - Temps: 81.4°F [27.4°C] - Humidity: 74.3% - VPD: 0.93 kPa - Soil %: [29, 35, 38, 32] ----------------------------------- - [11:59]: Time to film the first entry for the Global Grow Cup! --- Going to be using BuildASoil 3.0 potting soil. --- Filming the video using a stand and my phone. --- This video is mainly to establish the container that the plant will be grown in. Also to prove that the container is a 16oz container and that it can hold 2 cups of soil. --- The ticket (order) number also had to be written on the cup. - [12:36]: Done! --- The video had to be done in one continuous shot with no edits (my original submission does not have the logo). --- There was also a photo that needed to be shot which shows the cup filled with 2 cups of soil (just like the video, the original image submission did not have the logo). --- I think I did everything correctly, but also sent an email for verification of submission and validation. --- Getting hyped! --- [*smokes a bowl] --- Going to defoliate today along with for the first-time, going to take cuttings for clones! --- After a bit of online research, decided to split the cloning process into two days. --- Today going to take cuttings and will soak them in a solution of aloe for 24hrs. Afterwards will change the water out and use straight distilled water. --- Then in a couple days, plan to transplant into coco plugs (Coco Coins) for rooting. --- For optimal results, also be using a rooting hormone (Clonex). --- Well.. Here goes nothing! - [17:01]: Evening check. --- Wow! #1 is looking huge! Her main top is stretching above the lower canopy which is continuing to bush out. --- #2 is growing along. Growth is gnarly and a bit droopy, but she’s getting taller! --- #3 is looking great! Still a bit small, but she is continuing to get larger. --- #4 looks like she needs a watering. --- Both plants in the back are also looking surprisingly great as well! - [17:05]: Checked down both fill tubes. --- Both reservoirs were completely dry! --- As far as today's defoliation, going to leave #2 and #3 alone and will focus my defoliation and cloning on the rest of the plants. --- This will be my first attempt at cloning, also going to try topping for the first time today. --- No pressure Ensign. What can possibly go wrong right? - [17:27]: Time to start the cloning and defoliation process! --- Filled a measuring cup with 3 cups of distilled water. ------ Added 3/4tsp of Horticultural Aloe ------ Added 1 more cup of distilled water --- Mixed the solution and poured an even amount into three separate solo cups. --- Made sure to mark two of the cups (#1 and #4). The unmarked one will be for any other clones from amongst the 6 phenos (if any at all). - [17:43]: Time to top and defoliate #1! --- Using a pair of brand new trimmers (AC Infinity), --- Gently cut the main stalk to even out the canopy. --- Then trimmed and cleaned most of the nodes leaving the top node or two. --- Also trimmed the leaf fingers a bit before placing the top cutting into the cup of aloe solution. --- Now for the rest of the cuttings! --- [~45 minutes later] - [18:32]: Managed to finish defoliating and cutting the rest of the clones. --- Took two more lower cuttings from #1 (3 clones total). --- Took 3 lower cuttings from #4 --- While defoliating, decided to try and clone the original #2 pheno as well. Took 4 small cuttings. --- Similar to the top cutting, trimmed and cleaned each lower node for each cutting before placing them into the cups. --- Before finishing up the 2nd cutting, I noticed the first cutting (the top cut that was also trimmed) was drooping. --- So I did not trim and the leaf fingers for the other cuttings. --- In total there were 10 cuttings taken for potential clones. --- My main focus was to take cuttings and to clean up all the lower growth from both #1 and #4. --- Defoliated and cleaned up the back original phenos as well (also trimmed back the cover crop). - [18:35]: Temporarily placed the cuttings onto the floor of the 4x4 tent. --- Took the trimmings (about 3 cups) and spread them onto the top mulch of #1 and #2. --- Time to set the environmental controls for the 3x3 veg tent. - [18:43]: Within the AC Infinity App, --- For the Veg Tent [3x3] controller, --- Adjusted the 'Vegetative [18/6]' Schedule for the grow light. ------ Set the Mode to ‘On Mode’ ------ Set the START/END times to 04:00PM/10:00AM ------ Set the MAX to 1 --- The IonBoard S33 is now utilizing around 60.8W (at intensity 1 out of 10). --- Adjusted the 'Vegetative [18/6]' Schedule for the exhaust fan. ------ Increased the Humidity’s HIGH trigger value from 81% to 87% --- Adjusted the 'Vegetative [18/6]' Schedule for the humidifier. ------ Decreased the VPD target value from 1.5kPa to 0.8kPa - [18:52]: Moved the cuttings into the 3x3 veg tent. --- It begins! I think. --- Going to let these cutting drink some aloe for a day before switching to straight distilled water. --- Hmm. Could be the white floor of the 3x3 veg tent, but have noticed the S33 has a whiter spectrum whereas the FC-6500 seems to be warmer in color. --- Anyways, - [18:58]: Poured 4 cups of distilled water down EB1’s fill tube. --- Poured 2 cups of distilled water down EB2’s fill tube. - [19:06]: Filled a pump sprayer with 5 cups of distilled water. --- Focused mainly on the straw mulch of #4. --- But also misted the straw mulch for the rest of the plants a bit. - [19:12]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. - [19:44]: Going to be using Clonex rooting gel before planting the cuttings into Coco Coins (pre-soaked with microbes and aloe). But before that begins, going to transfer the Clonex gel into a squeeze bottle. --- Gently peeled back the seal on the original Clonex bottle. Just enough make a tiny opening, --- Then slowly and carefully poured the gel into an empty squeeze bottle. --- Also removed the sticker from the original bottle and placed it onto the new one. - [19:54]: Perfect! --- Instead of applying the gel to the cutting, going to be applying the gel to the Coco Coin. --- This squeeze bottle will make applying the gel a lot easier. --- Will take PPFD readings tomorrow. --- Also will change out the aloe solution to distilled water. --- I really hope I didn’t screw things up before they could even begin. --- Don’t die on me ladies! --- Please. Day 03 - Wednesday - 06/05/24 - Total Days: 100 ----------------------------------- Daily Averages [~23:00] - Temps: 81.9°F [27.7°C] - Humidity: 75.5% - VPD: 0.90 kPa - Soil %: [29, 36, 38, 36] ----------------------------------- - [09:40]: Quick morning check! --- #1 is looking a bit droopy, but looking okay. Topping is a high stress technique so going to take some time to recover. Don’t plan on flipping the main 4x4 tent to flower for a good week or so which should be enough time. --- #4 looks great! The defoliation seems to have no effect on growth. Nice! - [09:41]: Also quickly checked on the 3x3 veg tent, --- Nice! The cuttings are looking great! --- No yellowing and they all seemed to have turned up towards the light. --- So far so good! - [22:53]: Evening check. --- #1 is continuing to dominate this grow! She has spread wide and looking incredible! --- #2 is looking gnarly, but getting there. --- #3 is getting larger! But still a runt. By far, her leaves are the darkest of the bunch, but she is still growing! --- #4 looks happy and growing along beautifully! Wow! - [22:55]: Checked down both fill tubes. --- Both reservoirs were completely dry! - [22:59]: Poured 5 cups of distilled water down EB1’s fill tube. --- Poured 2 cups of distilled water down EB2’s fill tube. - [23:05]: Checked on the 3x3 veg tent. --- Ooo yea! The cuttings are still green! Nice! - [23:07]: Took PPFD readings. --- The cuttings were around 121 μmol/m²/s which gives a DLI of 7.84 mol/m²/d --- Nice! These levels are on the lower range for seedlings (~100-300), perfect! I think. - [23:14]: Swapped the aloe water out to straight distilled water. --- Going to let these cuttings soak for one more day before planting. --- Please don’t die girls! - [23:15]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. --- Ooo yea! --- Tomorrow is the big rooting day! Day 04 - Thursday - 06/06/24 - Total Days: 101 ----------------------------------- Daily Averages [~23:00] - Temps: 81.9°F [27.7°C] - Humidity: 75.2% - VPD: 0.91 kPa - Soil %: [32, 38, 38, 34] ----------------------------------- - [16:20]: Evening check. --- #1 is a bit droopy, but growth is looking green and healthy. --- #2 is looking bigger! She’s also looking sort of droopy. --- #3 is growing along nicely! Looking good girl! --- #4 is looking great! A bit droopy but plan to water today. - [16:23]: Checked down both fill tubes. --- EB1's reservoir still has some water. --- EB2's reservoir was completely dry! - [16:23]: Checked the Ecowitt soil moisture sensor data: --- 28% - [CH01 EB1 - Garlic Budder #1] --- 36% - [CH02 EB2 - Garlic Budder #2] --- 37% - [CH03 GFP - Garlic Budder #3] --- 30% - [CH04 FPT - Garlic Budder #4] - [16:30]: Using a pump sprayer, --- Misted the straw mulch of #4 with 6 cups of distilled water. --- Focused mainly on the straw mulch. --- Also misted the straw mulch of #3 (in the grassroots fabric pot) a bit. - [16:43]: Poured 5 cups of distilled water down EB1’s fill tube. --- Poured 3 cups of distilled water down EB2’s fill tube. - [16:52]: Checked the Ecowitt soil moisture sensor data: --- 56% - [CH01 EB1 - Garlic Budder #1] --- 44% - [CH02 EB2 - Garlic Budder #2] --- 40% - [CH03 GFP - Garlic Budder #3] --- 45% - [CH04 FPT - Garlic Budder #4] - [17:01]: Took general PPFD readings. --- #1 was around 379 μmol/m²/s which gives a DLI of 24.56 mol/m²/d --- #2 was around 333 μmol/m²/s which gives a DLI of 21.58 mol/m²/d --- #3 was around 293 μmol/m²/s which gives a DLI of 18.99 mol/m²/d --- #4 was around 378 μmol/m²/s which gives a DLI of 24.49 mol/m²/d - [17:09]: Took the weekly height and light distance measurements. --- #1 was about 21" tall. --- #2 was about 13.5" tall. --- #3 was about 9.5" tall. --- #4 was about 19.25" tall. --- Hmm.. - [17:19]: Adjusted the right oscillating fan a bit. --- Re-angled the CloudRay S6 oscillating fan upwards. Been noticing that the air has been hitting the tops of the plants so easing off a bit (#1 is still getting hit, but she’s huge so not too worried). - [17:23]: Back to the measurements! --- #1 was about 9.5" away from the grow light. --- #2 was about 17" away from the grow light. --- #3 was about 17.5" away from the grow light. --- #4 was about 11.5" away from the grow light. - [17:46]: Checked on the 3x3 veg tent. --- Cuttings are still green! They do look a bit droopy but no signs of yellowing. --- Okay! - [17:55]: Time to begin the rooting process! --- For my first attempt at rooting, going to be using Coco Coins pre-soaked in saponins, microbes and aloe. --- To further help with rooting, going to also be using Clonex rooting gel. --- Filled a measuring cup with 4 cups of distilled water. ------ Added half of 1/64tsp of Quillaja Saponaria Extract [60] ------ Added 1/16tsp of Horticultural Aloe ------ Added 1/8tsp of Mycrobe Complete --- Mixed the solution thoroughly. --- Time for the Coco Coins! --- 10 cuttings means 10 Coco Coins. - [18:09]: Dropped 10 Coco Coins into the measuring cup. --- The coins immediately started to expand. --- A bit too much.. Oops! --- Poured the solution and Coco Coins into a pitcher. --- Added 2 cups of distilled water to the solution (now at 6 cups). --- Great! The coins are pretty much fully expanded, but going to wait a bit longer to fully saturate each coin. --- [~20-30 minutes later] - [18:42]: Great! --- Took the seedling and flood tray from the AC Infinity propagation dome and placed all 10 Coco Coins into the slots. --- Gave each Coco Coin a quick shake to remove excess solution. The coins were not dripping with solution but still pretty saturated. --- Arranged them into 3 groups with the cuttings in mind. --- Also tried to keep the pre-made holes intact. --- Time to inoculate the Coco Coins! - [18:54]: Using a squeeze bottle, --- While keeping the nozzle from making contact with the coco, gently filled each pre-made hole with Clonex rooting gel. Just enough gel to fully cover the hole of each coco coin. - [19:00]: Time to plant the cuttings! --- Gave each cup a misting of distilled water. Focused on wetting the top growth with water. --- Okay! --- To avoid mixing cuttings up. - [19:01]: Starting with the original #2 pheno cup, --- For each cutting, --- Using a pair of clean trimmers, made a final 45° cut about 1/2" from a bottom node. --- Then stripped away and scared the protective membrane below the node before planting. --- Made sure the node was about 1/2" below the surface of the coco. --- To help with planting, while inserting each cutting, gave the Coco Coin a gentle squeeze to loosen the coco. This also helped to ensure the coco and gel was in good contact with the cutting. --- Once the cutting was planted into the Coco Coin, made sure to place back in the same spot (made sure to keep the cuttings in their groupings). --- Once a cup was complete, made sure to keep the label with the group. --- Re-misted the top growth as needed to keep it wet. --- Also wiped the trimmers with isopropyl alcohol in between cuttings (plan to use 10% bleach solution for next time). --- Repeated this process until all 10 cuttings were cut, planted, and in the tray. --- The coco coins fit perfectly into the tray and don’t reach the bottom. Nice! --- The bottom air gap is important. --- Poured a bit of distilled water through one of the empty slots into the bottom of the tray. Just enough to fill the bottom of the tray, but not enough to reach any of the Coco Coins (~1/4cup). - [19:35]: Placed the propagation tray with cuttings into the 3x3 veg tent. --- Placed the first layer of the propagation dome on before giving the sides a misting of distilled water. --- Also sprayed the top of the propagation dome before covering the cuttings. --- Vents are all fully closed. - [19:40]: Placed the bar lights onto the top of the dome before configuring the controller. ------ Set the START/END times to 04:00PM/10:00AM ------ Set the bar light’s intensity to 2 (out of 10). --- Also made sure the propagation light controller’s time was in sync with the Controller 69 Pro. - [19:47]: Took PPFD readings. --- The cuttings were around 136 μmol/m²/s which gives a DLI of 8.81 mol/m²/d --- The PPFD levels are similar to the floor. --- Perfect! --- Going leave the IonBoard S33 on during this rooting process. --- Will check back tomorrow to cycle the air under the dome. - [19:56]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. - [20:17]: Quick night check! --- Ooo yea! Growth is raging and looking perky! --- Mainly checked on #1 and #4 which were looking incredible! --- Keep on growing ladies! Day 05 - Friday - 06/07/24 - Total Days: 102 ----------------------------------- Daily Averages [~23:00] - Temps: 82.7°F [28.2°C] - Humidity: 76.2% - VPD: 0.89 kPa - Soil %: [37, 40, 38, 35] ----------------------------------- - [10:03]: Decided to increase the ambient temp in the 3x3 veg tent. --- Within the AC Infinity App, --- For the Veg Tent [3x3] controller, --- Adjusted the 'Vegetative [18/6]' Schedule for the heater. ------ Increased the Temp target value from 78°F to 82°F --- Hopefully this will help to keep the veg tent at a more consistent temp. - [22:26]: Evening check. --- Ooo yea! The garden is looking incredible! --- #1 is looking perky and just bushing out! Wow! --- #2 is getting big! Growth is weird and leaf fingers are huge! Just going to let her grow. --- #4 is looking happy and growing along like a champ! Nodes are starting branch out and she is turning into a bush! - [10:28]: Checked down both fill tubes. --- Both reservoirs were completely dry! - [22:33]: Poured 5 cups of distilled water down EB1’s fill tube. --- Poured 3 cups of distilled water down EB2’s fill tube. - [22:40]: Checked on the propagation dome (inside the 3x3). --- Ah yea! Looking great ladies! --- Lifted the top of the dome to let some fresh air in for a bit. --- Wow! --- Leaves still look nice and green! --- So far everything looks great! --- Just going to continue on! - [22:53]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. - [11:01]: Decided to adjust the humidifier for the 3x3. --- Within the AC Infinity App, --- For the Veg Tent [3x3] controller, --- Adjusted the 'Vegetative [18/6]' Schedule for the humidifier. ------ Increased the VPD target value from 0.8kPa to 1.5kPa --- The higher VPD level will essentially turn the humidifier off. --- I won’t be needing the humidifier for a good week so might as well save the water. Day 06 - Saturday - 06/08/24 - Total Days: 103 ----------------------------------- Daily Averages [~23:00] - Temps: 81.6°F [27.6°C] - Humidity: 74.9% - VPD: 0.91 kPa - Soil %: [35, 40, 37, 31] ----------------------------------- - [07:40]: Quick morning check! --- #1 and #4 are looking perky and happy! --- Also checked on the propagation dome, --- All cutting still look green! Hyped! - [20:02]: Evening check. --- Wow the garden is raging with growth! --- #1 has blown up! She has clearly recovered and growth is ramping up again! --- #2 is stretching upwards! --- #3 is now the smallest of the 4, but still getting larger! --- #4 is looking incredible! Wow! Growth looks perky and happy! - [20:05]: Checked down both fill tubes. --- Both reservoirs were completely dry! - [20:10]: Poured 6 cups of distilled water down EB1’s fill tube. --- Poured 2 cups of distilled water down EB2’s fill tube. - [20:16]: Checked the Ecowitt soil moisture sensor data: --- 35% - [CH01 EB1 - Garlic Budder #1] --- 40% - [CH02 EB2 - Garlic Budder #2] --- 36% - [CH03 GFP - Garlic Budder #3] --- 27% - [CH04 FPT - Garlic Budder #4] - [20:19]: Using a pump sprayer, --- Misted the straw mulch of #4 with 5 cups of distilled water. --- Focused mainly on the straw mulch. --- Also misted the mulch of #3 a bit (in the fabric pot). - [20:27]: Checked propagation dome (in the 3x3), --- To cycle the air under the dome, lifted the top off for a bit. --- Ooo yea! Everything is still green and looking great! --- Keep on rooting ladies! --- Oops! - [21:45]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. Day 07 - Sunday - 06/09/24 - Total Days: 104 ----------------------------------- Daily Averages [~23:00] - Temps: 81.5°F [27.5°C] - Humidity: 74.8% - VPD: 0.91 kPa - Soil %: [36, 40, 37, 36] ----------------------------------- - [08:18]: Quick morning check! --- Nice! The main tent is looking great! #1 and #4 are both raging with growth! --- Checked on the propagation dome (inside the 3x3) and the clones are still looking green! --- Wow! Everything is going almost too well! Just keep on growing! - [19:08]: Evening check. --- Garden is just exploding with growth! Seems everyone has fully recovered from the defoliation and topping! --- Wow #1 is bushed out and looking incredible! --- #2 is growing really starting to get large! Growth still is funky, but stoked none-the-less. --- #3 is starting to fill in the pot! Getting larger! --- Wow! #4 is getting taller and looks healthy and green! - [19:12]: Checked down both fill tubes. --- Both reservoirs were completely dry! --- Wow the canopy is really starting to get taller and closer to the light. May need to raise it up soon. --- Absolutely surprised how low the light levels have been throughout this entire cycle. Barely moved the light and have not increased the intensity past 2 (out of 10). Less is really more. --- Anyways! - [19:18]: Checked the Ecowitt soil moisture sensor data: --- 36% - [CH01 EB1 - Garlic Budder #1] --- 41% - [CH02 EB2 - Garlic Budder #2] --- 37% - [CH03 GFP - Garlic Budder #3] --- 34% - [CH04 FPT - Garlic Budder #4] - [19:19]: Poured 6 cups of distilled water down EB1’s fill tube. --- Poured 3 cups of distilled water down EB2’s fill tube. - [19:24]: Checked propagation dome (in the 3x3), --- To refresh the air, lifted the top off for a bit. --- Sweet! Still green! Wow! --- Using a spray bottle, misted the top growth with distilled water. - [20:35]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. --- Wow what a week! --- Growth has been just insane in the 4x4 tent! All plants have fully recovered and have just exploded with growth. --- I think it’s time to flip to flower! --- Also, I’m absolutely baffled about how well the cloning process has been going. --- So far no issues! --- Not complaining, but just surprised. Keep on growing ladies! --- If all goes well, should have fully rooted clones soon ready for transplanting (into solo cups of course). --- Absolutely hyped for next week! --- Maximum warp Ensign, Engage! [END OF WEEK 14|07]

12/12, Fertilization goes on the same days with the nutrients above and water intake approx 300 ml per plant per day. Ventilation on at the same time also. They are crazily stretching:)

Привет всем, сори за задержку, не было времени. эта неделя прошла не плохо, появился приятный аромат лесных ягод и цитруса. изменились удобрения и так же добавленная патока для улучшения цветов.

Beginning of week.. Still waiting on these damn pistils to finish up.. Trichomes are still looking pretty clear for the most part.. Plenty of milky but Id rather have a little amber starting and still seeing mostly milky/cloudy.. Not in it for the clear trichomes lol.. I prefer the couchlock effect more anyway. I have read that i stead of counting flower as the day of flipping to 12-12 because outdoor growers have to wait till they see flower starting.. Which can take up to 2 weeks after flipping to 12-12.. So I guess adding 2 more weeks to what I thought.. So.. Expert Seeds say the longest she could take is 64 days.. We are beginning week 7 of flower if we look at it that way then.. Which would mean that today is only day 49 or so... 63 days will be about 9 weeks of flower... Some shit like that.. Ugh. I should keep better track of the days lol. I could just do it by the weeks.. But I feel like this strain is already going way longer than she should have. I can tell the end product is WORTH THE WAIT for sure!!! .. Later that day.. Ok so I went ahead and mixed a batch of pH'd water with some General Hydroponics FloraNectar Fruit-N-Fusion.. 1qt of water with 2ml of the mix... I'm hoping to stop the yellowing from spreading to the buds at this point since I need to push her another 2 weeks, at least! Hopefully it will help the terpene profile also.. It smells like it should lol.. This stuff smells delicious.. I cant wait to see what it does when used throughout an entire flower cycle.. Not all stupid like I did this time lolol.. Just not trying to add anymore salt nutes.. Or any nitrogen I guess since its getting closer to harvest.. I wish I would have been using it the last 2 weeks at least.. Oh well.. Live and learn!.. Mid week.. Ive been still watering with Flora Nectar FruitNFusion in pH'd to 6.1 tap water during the day.. And just pH'd to 6.2 tap water that is left in the fridge to be able to water with cold water at lights out.. Not doing much to this strain.. But my other strain is turning super purple! Its so pretty! Im actually trying to create some feminized pollen from a cut from this plant. Its such a heavy yielder and super dank asf.. These nugs could break rocks lol.. Rock fucking hard.. Anyways.. Just waiting till she's ready to be harvested! End of week.. She has fattened up some this week. I should have never flushed so early lol. Live and learn tho.. Smells are lingering alot longer than they were before.. Now the whole house smells everytime I pic her up for watering and daily inspections lol.. She is slightly turning colors.. Reds.. Pinks.. Some purple.. Done with this week.. On to the next!...

30.07. Blue Sunset Sherbet Day 92# Yesterday was the end of the thirteenth week for the plant. She progressed poorly, almost not at all, she must have spent 5 of the last 7 days lying in the grass, and she was more stressed than not..I took off a lot of her yellow leaves...tomorrow I will dig the pot in the ground and if I don't know if it is smart...yesterday she entered the preflower and received almost a double dose of tnt and a full dose of cal-mag, the next two waterings are just clean water to eat all that from the ground and I'm moving with the bloom and boost she wouldn't stretch too much and in order for the flowers to develop nicely... I'm sure she has enough nitrogen to stretch it, if she lacks it, let her extract it from the leaves and if she asked for nitrogen a couple of times in addition to regular feeding, that's why I increased her dose by this amount, and that she has just enough for stretching, not too much… The last 3-4 days the temperatures are much more normal, except that overnight it gets a little colder, up to 14 c Stay High and Keep Growing!!!

Hope you guys had an alright week, the rain and floodings here in Europe has wreaked havoc on my outdoor garden, however this diary isn't about my Chamelauciums, its about that sticky green stuff. and boy this lady has started her stretch! I think I might have made the right call flipping her when I did because I can tell she's going to stretch big. Made adjustments to a couple of things this week; my bucket needed more oxygen, so I got a bigger pump and I have fixed my temperature issue by Literally just aiming an air-conditioner at the back of my tent, where my air pump is and as a result, now my water remains a chill 18 degrees! I also need to start keeping my tent closed, even though I absolutely love watching my plants during the day, some critters have made their way inside, eating at the leaves, for now in veg I don't really mind all that much, but I don't want any creepy crawlies when flowers start forming, those are mine and mine alone, not sharing those with any grasshoppers! I recommend keeping a go pro or something in your tent, its quite fun to observe grow, like how the leaves droop 20 minutes before lights out, and start praying upwards before light comes on, these plants really do get into a sleep like rhythm. doing a diary in general just adds a whole lot to the hobby, whether you do a private catalogue, or public, try it! Thanks for stopping by, I suspect we'll see the first signs of flowering next week, I've never grown this Strain, but I can see a few pre flower pistils forming as I'm typing this. Enjoy your week, as always stay safe and keep growing.

Day 89!!!! I came back from vacation and started harvesting right away, so the girl grew really big, but I gave her too little light, and at the end of the growth I didn't remove the leaves :( because I was busy on vacation :( but basically I'm still incredibly happy, her flowers are not very firm, they have a lot of "AIR", but a lot of shiny sticky trichomes, the girl grew really well throughout her growth, next time I will definitely use LST, this growth was with very little LST, there will be an update when the harvest dries up :) good luck to everyone:).

Short summary of my pheno hunt for a gas strain to build up a lib

I wanted to try a grow by the breeders earlier recommendation, and with this being an 8 week sativa, I HAD to try it. The effects at week 8 are HEAVY! The only downside is that the high only lasts for about an hour to an hour and a half, and then starts winding down for about an hour before being level again, and I don’t blame the strain, I blame myself for not waiting longer, but I wanted to see how the plant would be affected. The terps on both are consistent, and similar to the 3rd I’m currently growing in a different cycle. The genetics seem super stable and I will definitely keep a stock of clones and seeds for ZDF. Only down side is the hunger this girl has over the other plants, she EATS during flower.

Really nice that u check this page, its very much appreciated, thanks! Some info: -----------------------Jack Herer----------------- Jack Herer is the most powerful cannabis plant you can grow from seed, so definitely one of your favorites! Our cannabis seeds are regularly tested and time and again show very good results with germination and stable growth of the plants. The plant consists mainly of sativa genetics. These cannabis seeds grow into beautiful cannabis plants that provide a good yield of dense buds with a high THC content. This is a strain that is suitable for both indoor and outdoor cultivation. Smoking this cannabis provides a powerful high with a long-lasting effect. Properties of Jack Herer cannabis seeds – Large yield with dense buds – These cannabis seeds are suitable for indoor and outdoor cultivation – Very well-known and popular cannabis strain – This is a strain with a high THC content – Gives you a powerful, long-lasting effect Information Jack Herer cannabis seeds Flowering time: 9 weeks Genetics: Jack Herer x Northern Light 70% sativa, 30% indica Plant height outdoors: 100 to 200 cm Harvest month outdoors: from June to October Yield indoors: 550 gr / m² Yield outdoors: 200 – 800 gr / plant THC : 20% Link to the shop: https://seedsgenetics.nl/product/jack-herer-gefeminiseerd/

This one was Baked in Paris by PerfectTreeSeeds, grown with AptusPlantTech only! Check the other weeks to see the ones with GreenPlanetNutrients! Great gassy notes, awesome structure, beautiful colours. I know this one came out a little too early, but I was having problems with humidity and also with smell so I decided to take 'em all out at the same time. Forgot to take pictures of her on the drying screen, will update soon (:

🔄 Looking back: Mimosa Evo #3 (Day 0 of flower) is still doing well overall, but continues to show signs of overfeeding 🚫 She doesn't seem very hungry, so I’ll lower the EC further – aiming for around 0.8 or maybe even 0.7. 🕒 Flowering begins: This week I flipped Mimosa Evo #3 to 12/12! Stretch is just around the corner 🌿📏 Really curious to see how much she'll take off in the next days – it’s getting exciting now!

Day 59-66 transition from veg to flower

56 days!!!!! wow this week it really rained a lot, there were storms during which we had to bring the girl into the house so that she wouldn't be broken by the strong wind:) but all that stopped, and the nice weather has already started:) it looks beautiful, and an interesting experience :) good luck to everyone:).

already really icy at the Buds stacking up too purple top buds