How many pots?

How Many Cannabis Plants Can You Grow Per Square Metre? Factors that determine how many plants you can grow per square metre. Contents: Factors that determine the number of cannabis plants you can grow Cannabis strain genetics The size of your indoor grow The size of your pots Training your plants Sea of green (sog) Topping and fimming Mainlining and lollipopping Low-stress training (lst) Screen of green (scrog) The grow lights you use Guidelines for number of plants under hid lighting Led grow lights Before you get started with your indoor grow operation, you need to have a plan. Among the things you need to think about is how many cannabis plants you can feasibly fit in your grow space. FACTORS THAT DETERMINE THE NUMBER OF CANNABIS PLANTS YOU CAN GROW From the available space in your tent to the size of your pots and the type of lights you’re using, several factors influence the number of plants you can reasonably fit per square metre. RELATED STORY How To Choose A Strain When Growing Indoors CANNABIS STRAIN GENETICS The first thing to consider is the type of cannabis you’re growing—the strain genetics. Sativas tend to grow tall, while indicas are stocky and bushier. Autoflowers grow particularly short, with some varieties reaching only 50–60cm. Even those without significant spatial limitations tend to choose shorter cannabis varieties when growing indoors. After all, you are responsible for providing illumination, so you need to account for the space taken up by your grow lights. Moreover, if you’re growing different strains and some end up being much taller than others, this can deprive smaller specimens of light, resulting in stretching and reduced final yields. If you don’t plan on training your plants, consider growing the same type of strain, or two strains with very similar heights, to avoid running into issues with spacing and lighting. Of course, the smaller and more compact your plants, the more you can fit per square metre. It’s up to you to decide if you’d rather crop several small autoflowers or just one or two ultra-vigorous hybrids. How Many Cannabis Plants Can You Grow Per Square Metre? THE SIZE OF YOUR INDOOR GROW The dimensions of your growing area will largely dictate how many plants you can grow per square metre, and in general. If you’re like most home growers, you’ll likely be using a grow tent set up in a suitable location in your home. Grow tents are available in many different sizes, from small 50 × 50cm tents to large ones that could fill half your room. The right size depends on what strain(s) you’re growing, how large your indoor growing space is, and what type of grow you are going for (heavy training, leaving plants to develop as is, etc.). As an example, if you just want to grow a single untrained photoperiod indica plant, a 1 × 1m tent should be sufficient. As you add more plants, you’ll need to scale up accordingly. But again, don’t just account for the eventual size of the plants themselves, but also lighting, ventilation, and other equipment. How Many Cannabis Plants Can You Grow Per Square Metre? THE SIZE OF YOUR POTS Depending on the diameter of your pots, several can fit into one square metre. But the size of your containers doesn’t just impact how many plants can fit per square metre, but also how big the plants will get overall. Said differently: The larger your pots, the bigger your plants will get. Recommendations for pot sizes: • ½ litre: Seedlings and young plants up to ~15cm • 2–3 litres: Plant height up to ~25cm • 5 litres: Plant height up to 60cm • 11 litres and more: Average plant height (check strain description) For the average indoor grow, you can fit nine 11-litre pots per square metre. Use rectangular planting pots to fully take advantage of your available growing area. With round planting pots, you’ll be wasting valuable space. See our planting pot calculator to find the optimal pot size for your cannabis plants. Plants per SQM Growspace (m²) Pot size 3 L 5 L 11 L 15 L 19 L 25 L Total: 25 plant/s TRAINING YOUR PLANTS With plant training techniques, you can keep the number of cannabis plants to a minimum while maxing out their potential. Each of these training techniques is designed to optimise space and increase yields. SEA OF GREEN (SOG) • 4–16 plants per square metre • Outcomes: Fast yield, keeps plants short, easy to perform, comparatively smaller yields per plant The sea of green method (SOG) is all about getting the most out of your available floor space. It is a good way to achieve a consistent outcome with photoperiod plants, clones, and autoflowers. This technique is fast and profit-yielding. In a SOG, plants only get 1–2 weeks of vegetative growth before they are forced to switch to flowering. No pruning or training is needed. As the plants don’t have time to branch out, the result is many short plants with short main colas. Under a 400W HPS light, you can fit 4–16 plants per m² in 5–12l containers. An optimal SOG grow can deliver multiple 500g/m² harvests per year. SOG TOPPING AND FIMMING • 2 large/5–10 small plants per square metre • Outcomes: Simple to perform, keeps height in check, boosts yield, prolongs growth phase Topping and fimming are high-stress training methods. By cutting off or pinching the main growing tip, you break the apical dominance of a plant so it develops multiple main colas instead of just one. This naturally results in bushier growth and causes plants to stop growing in their characteristic Christmas tree shape. Any high-stress training technique that involves damaging your plants (like both topping and fimming) slows down growth and extends the vegetative phase. If you’re pruning, topping, and/or fimming, allow your plants to recover and expect a later harvest date. Don’t overdo it; top or FIM 2–3 times per growing season. FIMMING MAINLINING AND LOLLIPOPPING • 1 large/2–4 small plants per square metre • Outcomes: Challenging to perform, consistent results, options for beginners and more advanced growers Mainlining and lollipopping are two plant training techniques that promote the growth of large buds at the ends of branches. • Mainlining Mainlining is a mix of topping, LST, lollipopping, and ScrOG. Plants are topped at the third node, with all the lower branches cut. This causes new growth to develop equally from one central hub, and plants are often topped a second or third time to develop multiple colas and an even canopy. This can fill up your grow space significantly depending on how many colas and the size of your pots, so keep in mind you may be able to fit fewer mainlined plants per square metre. MAINLINING • Lollipopping Lollipopping is complementary but can be done on untrained plants too. All branches—including the main stem—are trimmed of unnecessary growth, leaving only the main bud and side branches with large buds. Just as with mainlining, the plant now directs energy toward the large buds. LOLLIPOPPING LOW-STRESS TRAINING (LST) • 2–4 large/4–6 medium plants per square metre • Outcomes: Suitable for autoflowers (no topping needed), best for beginners, requires no major recovery time LST is a beginner-friendly training technique. You’re essentially just bending and tying down stems during vegetative growth to manipulate plants into growing horizontally. LST can be combined with other techniques, such as ScrOG. It is often done together with topping to break apical dominance, but it can also be performed without topping on autoflowers. Between 2–4 plants trained with LST can effectively fill 1m². LST Trained plants per SQM Growspace (m²) Low Stress Training (LST) 4 plant/s Sea of Green (SOG) 12 plant/s Screen of Green (SCROG) 1 plant/s Topping 1.5 plant/s SCREEN OF GREEN (SCROG) • 1–2 large plants/4 medium-sized plants per square metre • Outcomes: Best yield per square metre, flexible with how many plants you want to use, for advanced growers only A ScrOG is the best way to utilise a single square metre of growing space. In this advanced training method, the screen is a grid-like mesh (chicken wire, netting, etc.) through which shoots of developing cannabis plants are woven to control growth. Growers usually start weaving their ScrOG during the vegetative phase and end it before the third week of bloom. A ScrOG keeps only the main colas under the light so the plant’s energy goes toward bud production. Top your plants early to get more branches, then proceed to train them in multiple directions through the screen. This way, you can get the maximum yield from your available growing space. You can choose how many plants/pots you use for a ScrOG. You could fill your space with only one monstrous plant in a large 20l pot, but you could also grow several smaller plants, such as four medium-sized plants each in a 10l pot. SCROG THE GROW LIGHTS YOU USE The last factor that determines how many plants you can fit into each square metre of your grow space is the type, and intensity, of your grow lights. This becomes ever-more clear when you realise that grow lights don’t spread light evenly across the entire area. The greatest light intensity (and thus the fattest buds) is right underneath the light, then decreases significantly toward the sides. This could make growing fewer plants more sensible, as you’ll probably be sacrificing yield to poor light spread if you cram in too many. There’s no point in depriving any of your ladies. If you’re growing weed with HID (high-intensity discharge) lights, a simple formula can give you a rough estimate for the recommended number of plants. Divide the wattage of your light by 75 and round up the fractions. RELATED STORY The Different Types of Lights for Cannabis: Pros and Cons GUIDELINES FOR NUMBER OF PLANTS UNDER HID LIGHTING 150W HID ÷ 75 = 2 plants 250W HID ÷ 75 = 3.3 or 4 plants 400W HID ÷ 75 = 5.3 or 6 plants 600W HID ÷ 75 = 8 plants 1000W HID ÷ 75 = 13.3 or 14 plants When using CFLs, divide by 150. For example, using a 400W CFL: 400W ÷ 150 = 2.6 or 3 plants LED GROW LIGHTS Modern LEDs output the same power as HPS using only 60% of the energy. Therefore, they cover the same space in less wattage. A good 250W LED is equal to a 400W HPS, which can cover around 5–6 plants. By comparison, a high-powered 1200W LED should be able to cover around 8–9 plants. However, keep in mind that wattage is only one value to consider when it comes to determining the power of your LEDs, as many other variables—including the type of LED—impact their effectiveness too. When using LEDs, it is best to consult the manufacturer for the recommended number of plants to grow and the optimal distance from your lights to your plants' canopy. Reputable manufacturers usually make this type of information available. PRO TIP: If uncertain about how many plants you want to grow, it's always better to keep it "safe" with fewer plants. Two large but happy plants with fat buds will ultimately be better than a tent full of small, light-starved cannabis that will only yield mini buds. In addition to that, you'll also save on seeds.