Stretch starting

Defoiled, added a second net. Enhancer and npk booster also added every 2 weeks

Well I said I was leaving her untrained but on day 56 I gently tied back a few branches to open up the canopy. This is looking like it's going to be my best grow yet.

📆 Week 6, 26 May - 1 June 2024 26-31 May - Observed and let the plant grow. 1 Jun - Did a light defoliation of plant (see picture) to allow light to reach all bud sites. 📑 This is her first week of true flower and she is still stretching some. Her size has doubled and as is now into more intense lighting, the canopy coverage reads at 40 DLI. It looks like the light power will need to only stay at 50% in this small tent. The new light is proving itself well so far, more light without added heat, no complaints - except for the dimmer switch. A true consumer marketing mistake by ViparSpectra. 🍶 28 May nutrient solution changed 🍽️ 28 May feeding schedule updated 💧 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient solution EC 2.6 at 70 degrees F 🔆 Light power at 50%, DLI 40 canopy coverage at 18hrs 😤 Using PYPABL, Air Pump, 400GPH That is it for this week. Thanks for the look, read and stopping by.

1 week after swotching to 12:12, this lady feels strong in her 4L pot, smells sweet like 🍓 trying to make her clone and keep her forever if she will be a good girl

Hey everyone 🤗. Today they were planted in their 11 L pots 😀. Now the root growth can really accelerate. When repotting, a total of 3 g per liter of Green House Powder Feeding Bio Grow was added to the Canna Coco 😊. That's enough for 8-10 weeks :-). I'm curious what they are doing this week and I wish you all a lot of fun with the update :-). Stay healthy and let it grow 🌱🍀 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

So far so good... couple plants are a bit behind others even though all germenated at the same time. It looks like 3of them are a week behind... but oh well, they are all still looking very healthy although in the photos they look very yellow but this is because of the light. There actually a very dark green colour. I've started to add top max now as they have 2- 3weeks left help them buds grow. The heatwave has finally stopped after 2weeks of it being nearly 40degrees by 10 am everyday . So plants seem a bit happier... Been really happy with this strain and will defo grow again. Only thing i might change is not putting as many plants in at once. Yeh 6 fit and I could fit another 2 or 3 in but the awkwardness of watering and checking for bugs or nutrient problems is a pain... There so bushy can't tell which plant is which... Update... New pics Height.. 73cm

Watering when the soil is dry

The problem encountered during the growth : - Water (at the beginning) too little pumps that didn’t propagate the water equally so I went for a bigger industrial pump that pumps equally in the whole tent. 
 - RC : Some problems with the humidity at the beginning but got sorted out when I got the de humidifier
 - Babies almost died mid-grow, came in with the ultimate save of the day, one day later and it was over. 
 - Had a problem with the container that held the water as water was empty when I’d get back at the end of the week (during flowering mode) so I went with a 120L container which works just fine. 
 - Didn’t flush properly because I was in a rush

Start of the journey for the Auto Gelato I am testing for Fast Buds Genetics 💪 .. I messed up and had my light timer turned off, so I ran 24 hours for the first week instead of 20-4, which I believe to be the culprit for the leggy seedling. That, or my light is not sufficient. It says it's 150 W on here, but I can assure you it is only 100 W out of the wall. I had the brightness down originally but brought it up to 85-90% to see if I can stop the stretch.

Welcome to my Peyote Gorilla by Seedsman. Doing this as traditional with soil as I can. Ezymes, power roots are in full affect. As they should be with good nutrition uptake. ROYAL MIX will start these Alling girls. They've been through a rough transplsnt. I've 20+ strains at dif stages in a 1m2 tent. Lots of young fems I can hold of. But, with my autos. They need to be in their final pots and not stressed to late. As 1 has, (unknown it could be Highcloudz or alien I'll know more when she's further ahead. Swiss Dream Rose CBD is in pre flower and another is CBDV from Kannabia. Peyote Gorilla has been living life under a plant, she needs her own. So, she'll be put into her own 11L pot until the end of her veg cycle. When been flipped, she'll be put into an 18L pot. Alga Grow will be used, when I uppot her. I'll add the 6 L of Bat Guano soil for pre flower. In the next 10 days or so. I'll introduce some Alga Grow. As it takes 7-+4 days for organic nutrients to release their full potential it takes time. Pure zym will be key in w quicking this process. Fish Force will be as will other stuff. She's gonna build a good root zone. I added 3grams of dolomite lime into the soil. Takes a few weeks to release cal naturally. Looking forward to trying this she's small, but been through a lot. And she has her own space. Now I just gotta dial in her DLI. Thanks to my sponsors Spider-Farmer & Mars-Hydro. Also to seedsman for holding the competition that allowed me have this strain.. This seed has been in cold storage for a year. Let's hope the slowness doesn't stick. She was been covered. So, light, and good nutrition and I'm hoping her to grow big fast and big. Most likely, she'll be topped. I don't know how much time I'll put into her. That all depends on the speed and what this pheno has in growth potential

Disconnecting controller cones in handy

Combined the cop of water and paper towel method then planted the sprouts in root root cubes

Last week, 2 irrigations, gave her plain water. Beautiful colours, it was a pleasure to grow such a pretty plant, production is going to be like 10 grams i expect, Cloudy days and bad weather while growing and flowering, but quality seems pretty good, she is so frosty and smells like fruits. 1 week of drying, and curing at the moment. Put the weed in jars with Boveda 62. Im making a harvest post with the smoke effects flavour and all the stuff, so you can get more details about the high, flavour and quality. Harvested 1/07/2018 Good vibesss

Week 3 of flower for Space Panda Pheno 2 in flower: Shes showing some purpling from the cold nights they are having unfortunately. Pheno 1 in veg: Probably going to flip her to flower next week.

Nachdem die Cookie Gelato etwas stärker gerochen hat, ist nun etwas milder geworden. Aber vielleicht liegt es auch den Wind den wir in letzter Zeit hier haben 😯