Day 25

Still looking good overall, I'm watering every 2.5 - 3 days Added some Fish Sh!t to the mix... hopefully these ladies will love it still a few thrips around but this week I will get a flower friendly pesticide or just the predatory mites, we'll see!

I let them recover from toppings and grow good before I switch to bloom 🌷

it's been a lil while but just waiting on harvest day apart from white spots on leaves which is caused by parasites living under and feeding on my leaves which I cant spray because of my buds plant is healthy formed 3 seeds because of the tiresias mist used for pollen sacks just a few more days till harvest

Very happy with this first time topping and got some hefty sized tight boulder nugs just drying now smells strong and musky with a hint of green apple, tried a tested and I slept for 16 hours very heavy hitter I did have a hard days work before hand though, buds stayed nice and tight after drying grinds up beautifull cured for a week tastes STRONG definitely dominant in GDP I hadn’t smoked in a while had my test of this and slept for 14 hours solid 🥊

I have already said everything, in principle, I advise everyone to grow this variety, I got an amazing tree half purple with giant cones and a large harvest, I am delighted!

Week 8 of flower is in the books and this show is quickly coming to an end. I said last week we had about 7-10 days and I was spot on at the 10 day mark. I was only wrong about the order. The cheese is ready to chop before the rest and the gorilla cookies, cherry Bomb and lemon haze will follow in due course. The cheese is a beast and it’ll take a little time to get it all run through the bowl trimmer. At least the big one goes first. Her tallest colas have foxtailed like mar, despite the late supercrop. You can tell where the sweet spot for the light is at about 10” distance from the canopy. Any closer than that and the tails begin to show prominently. It’s a good example of just how close you can get to these fixtures with a little bit of prior experience. It’s been noted for the next run😎👍😎. The res. is on an h2o2 only flush for the remainder until the rest are ready to come down. Not a moment too soon either - the pollen chucking project has stalled out waiting for these girls to finish and now that we’ll have a little extra room, we can start running our cuts in the aerocloner🤟. Not long at all now folks. Thanks for tagging along through all this. Learned a bunch about this system and we’re back to hardware mode to make some serious improvements for the next run🤙😎. I love hardware mode😉. Background/Repetitive Nonsense The strain line up on this grow is look’n quite saucy 😈. We’ve got 2 FB strains this time around - Gorilla Cookies (seems we always have some GSC cross in the works). Mainly because the colours look stellar and remind me of a sugar breathe we did last year that was 🔥. The other FB is their original Cheese strain... because we already smoked all our cheese... and we really like our cheese...😉. Emerald triangle was kind enough to include a freebie of Lemon Haze. Wasn’t really big on the list but we haven’t done a haze strain to write home about yet so worth a go👍. The last is a Cherry auto from Bomb seeds that we’ve been trying to get to for months. Let’s just hope that she’s not a dud like the last bean. The new digs for this run are courtesy MarsHydro👊. Their 2x4 single grow tent, paired with a shiny new 240w QB courtesy ViparSpectra. These folks were kind enough to discuss a collaboration and as a result, here we are to test out the gear with an inaugural run of autos. Each week, we’ll try to expand on some of the benefits of each, as well as any limiting factors or considerations that need attention when pondering purchase. Already I can say that both are high quality products in terms of overall craftsmanship. MarsHydro 2x4 Grow Tent: Excellent construction in terms of durability. Reinforced stitching on the zippers and corners ensures zero tearing. Conveniently placed screen vents and intake/exhaust ports. The ceiling exhaust port only exists on the right side. Perfect for me but not great if you’re running exhaust from the top on the left side (left side wall port makes up for this however). The aluminum frame is rigid enough to support the weight of the lights and accessories. Once you have some weight in the tent, she’s go’n nowhere and you can assemble and break it down in record time if moving or stashing the grow op. Only limiting factors I’ve noticed is that temp. Control will be an issue for a tent. It just doesn’t have the same insulating ability as a wood cabinet or other permanent enclosed space. No worries, this is offset by a small desktop heater and keeps the environment exactly where desired. The other issue was a production problem - the ceiling vent was accidentally stitched into the corner seams on the assembly line. Again, no real issue - just pulled it out with no damage or fraying to the tent or port👍. Website link here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-24x48x70-2-x-4-cabinet-closet-grow-box-upgraded-diamond-1680d-mylar-for-sale ViparSpectra 240w Quantum Board: This thing is sleek and slick in terms of design. Closest comparable to it that I’ve seen would be spiderfarmers line of qbs. They feature the same top-o-the-line components and roughly similar spectrums. Where VS takes the advantage is in the convenience of the dimmer nob which is easily accessible and works great at 50% with no strobing👍. The heat sink is also larger which contributes to lower temps. That’s not a good thing in my case but beneficial for most folks. I can already say that this will be a great fixture through all stages of growth. Where I know this light will excel will be in the veg. Stage for sure. Dimming function gives seedlings a much better chance of success with the ability to use lower lighting levels early on and the coverage area on a 240w is great. The average grower will find this panel suitable and fitting to their needs in a 2x4 grow space although I’d suggest 2 units if going any larger than that. The total output in this space equates to about 30w/sq.ft. Which is a decent amount of coverage based on power vs. Growprint. Ideal for veg. Certainly but, in flower - I tend to run closer to 50-60w/sq.ft to achieve higher yields. Again, similar fixtures have performed admirably in the past and while this wouldn’t be considered an “entry-level” fixture, I’d recommend that any grower new to the game not skimp on lighting and start with one of these. The price points are a great value for quality LED tech. These days, so there’s little reason to even consider a lesser fixture👍. I have no detail on limiting factors for this light as yet but have heard that stock branded fixtures don’t necessarily incorporate enough red diodes. I’ve seen no issue myself but confess - I’m no lighting guru. Website link: https://www.viparspectra.com/collections/xs-series/products/xs-series-xs2000 ***8% discount when using code: “ItBudWhisper”*** Happy to have you along for the ride if you made it this far through my opening rant!!😎🤟😎🤟😎

Scusatemi, le indicazioni sulla quantità di nutrimenti non è precisa

Quella Che vedete non so bene di preciso che genetica sia, ho messo banana purple punch perché coltivo gorilla cookies auto e mi è arrivata con I semi in omaggio,però potrebbe essere anche una straw Barry gorilla perché ne ho la confezione,La pianta in confronto alla gorilla cookies rimanere molto piccola,starà massimo su 100 g di produzione ma mostra dei colori bellissimi,è alta all’incirca 90cm e per essere un autofiorente sembra essere molto longeva,sono 2 Mesi ed ancora non è entrata in senescenza,posteró aggiornamenti intanto godetevi la bellezza ed il culo che ho avuto.

These 2 are growing likes beasts. They will both be going outside in the next 2 weeks or so. Just waiting on overnight temps to stay in the double digits and we are GTG.

She starting to stretch

semana evolutiva, acertando os fatores que faltavam, mantendo o VPD, coloquei a Tela de SCROG para segurar o topo que já tinha ultrapassado a borda do vaso, os demais ramos continuo puxando para a borda, até agora nenhum Pistilo, fechando 4 semanas muito bem, sem estresse e com diferentes intensidades de técnicas em cada Auto, to fazendo meus próprios testes, coloquei as Auto do vaso mais largo para Green House que eu fiz, para posicionar os vasos do Indoor na posição final e adicionar a tela de SCROG, as Auto Outdoor adoraram a casa nova! seguimos..

Dear diary, Week 7 has brought us closer to flower. Despite some variations in their development, they continue to progress steadily. 🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀 ⏰ Day 46: Provided a feeding session with a nutrient strength of 1.64ms and a pH level of 5.7. After tying down the tops yesterday, the plants exhibited upward growth again. ⏰ Day 47: During the evening feeding session, I administered a feeding with a nutrient strength of 1.67ms and adjusted the pH to 5.6. This also is the day that marks the final topping session, bringing the total number of tops to 16 for each plant. The plants have responded well to the previous training, and I'm eager to observe their continued growth with the mainlining technique. ⏰ Day 48: I provided the plants with a feeding containing a nutrient strength of 1.67ms and a pH level of 5.7. ⏰ Day 49: During the evening feeding session, I maintained a nutrient strength of 1.67ms and adjusted the pH to 5.6. Additionally, I removed another set of fan leaves to optimize light distribution among the tops. ⏰ Day 50: The plants received a feeding with a nutrient solution at a strength of 1.64ms and a pH level of 5.8 ⏰ Day 51: During the evening feeding session I provided the plants with a nutrient solution at a strength of 1.64ms and adjusted the pH to 5.8. ⏰ Day 52: Administered a feeding with a nutrient solution at a strength of 1.64ms and adjusted the pH to 5.8. To ensure optimal light exposure for all the tops, I removed the last set of old fan leaves and did some more low-stress training on the other 2 plants in the tent to align their heights more closely with the WCs.

Feb 22 Really starting to thicken up! The soil underneath is still plenty moist even though the fan is blowing on it 24 hours a day. The roots will grow more quickly as the water dries up and the roots continue their search for more.

Hello growmies!! Well I ended up with just one girl in the tent and two little seedlings I'm growing 12/12 from seed (I'm just curious about it, not expecting anything too impresive) this week I actually started using my scrog net to keep the taller stems from going up and making them stay at canopy level, right now ppfd is about 1100 in most parts of the canopy...

I won't say it was a perfect growing experience, because i kept running into problems with keeping the lights a good distance away, but that was the most difficult problem I faced. It was definitely a very successful do-over. Both of these plants easily were 2 times the size (width/height) of my 1st sour stomper attempt, they yielded at least double and in Plant A's case...triple. And all by the few simple changes of using LEDs earlier in the grow, larger pots, being in a tent and having one tiny duct fan. My nutrient regimen stayed pretty low and for the most part the same as previous grow. However in my opinion one of the most crucial differences was having them in the 3 gallon pots. They didn't dry out as quickly and they were able to be soaked more effectively than the 1 gallon smart pot had been. For me this was a very important grow on grow diaries as this was basically Part 2 of my first indoor, man made grow. Learning these minimal differences in how to have plants turn out enormously better was essential to any future indoor grows I might do, even though I'm sure i just skimmed the surface on potential problems that could occur and how to fix them. The buds from this grow were not only dense enough to be worth smoking, but every piece of the plant including its leaves will be useful for pressing. The couple presses i did on this plant so far had a beautiful golden color, an amazing smell, and had zero plant byproducts inside it from using the 90 micron bags. The only downfall with the micron bags and the pucks are they retain a fair amount of the pressed rosin, the only solutions I can think of would be to add them to an edibles mixture or to stack them all up and continue repressing. All in all this was a fantastic grow, and I'm very grateful for all the support and for mephisto for making such a solid strain.