The Grow Awards 2026 🏆
Likes
Comments
Share
She is flowering more and more each day and getting bigger than I expected haha. I have had to construct a makeshift "scaffold" around the tent so I can hang the light higher. The leaves are now slightly to big for the tent, so I hope she dosent get much bushier. Lots more pistels, and lots more growth, quite happy. # new tent coming 😁
Likes
43
Share
Medium: Yep - still gonna beat on the DWC drum. It just gets better and easier every run. Almost religiously changed out the res. every week and this was definitely overkill. Could’ve easily gotten away with every 10 days to 2 weeks. Stuck with peroxide this run again instead of going with bennies via hydroguard or hygrozyme. The results speak for themselves on a 6 week veg. That’s for sure. Still save’n them dolla bills on the nutes too. Minimal nute mixing (as well as simplistic regime) and for what we’re using in each res. - gotta be easily a 50-60% savings on nute consumption vs. more traditional methods. Honestly makes one wonder why organic soil grows are seemingly all the rage. I’ve found terp. Profiles, structure, plant health and of course yields to all be just that much better in straight water. What more can I say, we love our DWC. Method 🎚️🎚️🎚️ The dueling methods were the whole point of this grow. Our best attempt to illustrate the differences between LST vs. LST/Topping ie. just how significant is the difference in terms of overall production? The truth of this test is a bit of a double edged sword. On the one hand, topping does have a significant effect on overall yield. This fact is regardless of whether or not from seed or clone.That said and when it comes to clones, you still have to be mindful of the drawbacks of further dividing (and thus reducing nug size for) main branches. Our topped clone #2 is a perfect example of this. While the structure demonstrates significantly more branching, the nug sizes are also significantly smaller. As you’ll see in the yield details it does somewhat make up for this through a higher overall weight but it was also a much less manageable plant than #1. Root mass on the topped plant was heavier and bulkier, drinking much more water than its counterpart. And in late flower half the plant was pretty much falling over. While some of this is attributable to the extremely hollow stems (and thus a carbon deficiency), making the most of the grow light proved difficult with the topped plant as bushy as it was. Basic summary - if ur cloning for profit or efficiency, stick with straight LST and grow a whole bunch of em. If I had to do it again I don’t think i would’ve bothered with topping - just for the sake of greater ease🤔🤔🤔. Then again, I’m greedy as fuck when it comes to my yields so I Could totally see myself trying to max everything out and go for broke🤙🤙. 3/5 volume bars for the rating - we accomplished what we were trying to. Yield/Harvest🌴🌴🌴🌴 Awwwwwe yeah - down to where it counts and these girls were champs💪. While internodal spacing was longer than necessary and overall bud size was smaller than average; these plants pushed out some solid weight👍😎👍. Ran er through a 7 day dry and all jarred up on a slow cure. Final numbers: Total yield - clone #1: 5.14oz = 143.92g Total yield - clone #2: 6.01oz = 168.28g Approx. est. yield: 600g/m2 divides by 4.8, multiplied by 2 (approx. for 2/3 the cabinets sq/ft) = 250g per 0.41m2 Actual yield: 11.15oz. per 0.41m2 = 312.2g per 0.41m2. That is some seriously good production right there😎👍😎. The high end avg. for this strain is 650g/m2. When you crush that out to my space and the numbers above, it works to about 270g per 0.41m2. Our actual yield still destroys the high end avg. by almost a zip and a half👍👍👍. The cree cob does it again. Fuck’n jazz hands y’all🙌! With results like these you could really give the whole grow a 9/10. It’s only an 8 in my book because it’s not my preferred high. Otherwise, any time you’re north of 5+ oz. per plant, it’s a good day at the office👍👍. Props👊👊👊 No choice but to shoutout Humboldt genetics. These beans have treated me so well and I can’t say enough Good things about the strains this organization puts out👌👍👌. Other than that, thanks to everyone who dropped by for a look and a comment. The convos always good and of course - any questions or enlightened conversation are welcome. Every time I try to take a break from documenting a grow, I end up growing something worth documenting. If your as high as I am right now, you should still be trying to figure out that last sentence.... stay lit y’all. See ya soon on the next one👊👊👊.
Likes
27
Share
🥊 🍼Greenhouse Feeding BioGrow & Bio Enhancer ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W ☀️Also special thanks to VIPERSPECTRA P2000 (200W) & XS2000(240w) LED growlights 🌱 FASTBUDS 420
Likes
38
Share
Another good week! I fed them once on Monday. A final shot to boost them for finishing up. I am pretty certain they will finish within 2 weeks.I also watered them on Thursday and today (Sunday). I defoliated both plants earlier this week as well. For one, I needed to open the canopy up to help keep the humidity down but, there were a lot of leaves yellowing and turning brown. I was not feeding them correctly... in the sense that I wasn't watering enough in between feeds. There were excess nutrients built up in the soil and I believe that led to the nutrient burn. Also, this was my first and only feed without the Grow Big due to flushing for week 9. I followed the Fox Farm feed schedule... but, I think I needed to understand my plants better! I also believe I stunted these girls! One is about 24" tall and the other is 21" tall. Both on the very low end of the growth chart. Overall, I am very happy!! So much to experience and learn in such a short window of time! I've thoroughly enjoyed this grow! I look forward to the harvest and experiencing all that is to come! One last thing... Anyone use GrowBuddy and any word on what is going on with the current download? I've followed the drama around taking so long and all that (the new hardware soon to be for sale for 2.0)... but, the website now says the software is available for free and working on Macs and Windows.... So, I downloaded it last night and I cannot activate an account. Everything has a greyed over kind of look... So, I assume they took some part of their servers offline... Anyone know if this is accurate and has anyone else activated a new account recently? Thanks for any insight!! Peace!
Likes
5
Share
Day 73 ~ Plant 1 is looking great and hopefully will be ready to harvest by the end of the week. Been checking the trichomes and while most are getting milky white, there are still a couple sites on the plant where I find clear trichomes. Plant 2 seems to be about a week or two behind the first plant...I will give plant 2 their final Nutes tmrw and then begin to flush. From reading about this strain it seems like it should take around 90 days from seed to harvest. So I would think plant 1 is running a little ahead of schedule and plant 2 is right on time. Day 75 ~ Both plants looking and smelling amazing! I was hoping to be harvesting the first plant by this weekend, but she is still growing and her trichomes are still not all milky and I haven't yet to find an amber one. So it might be another week or so before I can start drying her out.
Likes
13
Share
@valiotoro
Follow
Hello everyone 😎 Week 7 of flower for the Amnesia HazZzzze🤯 All the tops buds are ready✂️ 3 different pheno🤩 Purple : the smell is citrusy & earthy very strong!🍋 Green : tropical 🤤 it reminds me the Pablo Escobar ! Max 2 more weeks & finito ✔️
Processing
Likes
16
Share
@PoshGrow
Follow
Welcome to Ultimate Auto Grow by PoshGrow! 🍀 Week #1 2020 September 1st - 7th. General Info: When planted: 2020 September 1st. Week: 1 Days: 1 - 7 Last Update Day: 2020 September 6th. Plants: 4 x OG Kush Auto 3 x Amnesia Auto 5 xAlaskan Purple Auto 2 x Blueberry Auto 1 x Northern Lights Auto Total: 15 girls. Equipment: NOTICE: I AM NOT SPONSORED BY ANY OF THESE BRANS! Tent: MarsHydro 1.5m x 1.5m x 2m or  Light: SpiderFarmer SF4000 QB Kit. Exhaust: 6" AC Infinity Cloudline T6 whit programable lcd + 6" AC Infinity Carbon Filter. Intake: 4" SwiftAir Inline Fan. Oscillating Fan:             Lower: 16" Ram Fan.             Upper: 16" Oscillating Ram Fan. Humidifier: Taotronics TT-AH001. Dehumidifier: Pavlit MD750. Soil: NPK soil 40% Compost, 50% Peat Moss, 10% Agroperlite. Pot: 5 gallon Fabric Pots x 15pcs. Nutriens: GHE Trio. PH Correcton: Chemoform pH-Minus Granulat. PH Pen: Cheap Chinese one, I callibrate it every time I use it. Watering: 8 ltr. Or 2 gallon Spear&Jackson Pressure Sprayer. Comment: Welcome guy and girls to Season #2 by PoshGrow! So alongside my 1sq. meter tent I got my new 2nd tent and setup. So at this time i will be running 2 tents. Germinated 6 diferent strains, 15 seeds in paper tower method. 11 sprouted, so had to use my seed reserve to fill whole tent back to 15 ☺️ First 11 girls planted September 1st, and other 4 girls September 6th. because I had to germinate them. First 11 girls doing perfect and growing fast without any isues, not much to say, lets wait till other 4 kick in 😉✌️ Watering and misting with pH corrected water 2 times a day in low dosage. Also, I am really happy about my Equipment quallity and that AC Infinity is just f*cking beast! Upcoming weeks going to be lit! 🔥Stay tuned!✌️
Likes
4
Share
primero hidrato mis semillas con el bio potenciador por 4 horas mas menos, luego las paso a un taper hermetico con papel absorbente hidratado con la misma solucion hasta que mis plantulas tengan 3cm app.
Likes
12
Share
@Fccfarms
Follow
Vegged for 19 days in the big tent and 2 weeks f seed in propergation room proir. Week 1 day 1 of flowering cycle. Started on Saturday 22nd June. Bring on the summertime heat . I wonder how these girls will cope.
Likes
77
Share
@Roberts
Follow
FBT2309 is doing great under the Mb Medic Grow mini Sun-2. I finally got the ph to stabilize not long ago. She has been growing fast, and strong since. She has started her preflowering. so I expect she will gain some size soon. Thank you Fast Buds, Gen1:11, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g If anyone needs to purchase fastbuds here is a link for my affiliate program https://myfastbuds.com/?a_aid=60910eaff2419
Likes
2
Share
@El_Flaco
Follow
🎥 My Week 3 Grow Log: Starting the Mainlining Process Introduction & Timing Whats Going On Growmies !!! welcome back to the 2025 Winter Grow! This week marks a really exciting milestone because the Special Kush 1 is finally ready for its first major structural training. We’re currently in Week 3 of the vegetative stage, and the plant has gotten big and healthy enough to handle some High-Stress Training (HST). The Main Goal: Mainlining My focus this session was to initiate mainlining. For those who don't know, this is the technique I use to create a perfectly balanced, symmetrical canopy, which should lead to much bigger and more uniform colas later on. This is where we lay the foundation for maximizing our final yield. The Steps I Took (Topping) Selection: I examined the plant and chose the perfect spot for the cut. I decided on the third node (counting from the bottom) as the anchor point for the manifold. The Cut (Topping): I carefully took my sterilized shears and topped the plant, removing the entire top growth tip (the apical meristem). This was done right above the selected third node. Redirection: Removing that main growth tip gets rid of apical dominance. Now, all of the plant’s energy will be diverted equally into the two main side branches growing out of that third node. These two branches are what will form the central "Y" shape of the manifold. The Clean-Up (Pruning) Lower Growth Removal: To ensure every bit of energy goes to those two future main colas, I systematically removed all of the lower growth. This included all the secondary growth tips and fan leaves from the first and second nodes. The New Structure: After the trimming, the plant now has a clean, bare stem leading up to the two chosen branches at the third node. This is the official "beginning of the mainlining" process. Next Steps The plant will now focus on recovering and growing those two new main branches. In the next few days, I'll probably be tying those two branches down gently to keep them level and open up the center (that's the Low-Stress Training part of mainlining). I'm really happy with how the first cut went. Stay tuned for the next part where we continue to shape this manifold! My Week 3 Grow Log: Precision Nutrient Feeding Part 1: The Nutrient Mix and Strength Check Water Base: I started with my baseline water and made sure it was ready for mixing. The Flora Series Mix (Per Gallon): I carefully measured out the General Hydroponics Flora Series nutrients, following my specific Week 3 veg schedule: FloraMicro: 4.5 ml/gal (This provides essential micro-elements and buffers the solution. FloraGrow: 6.1 ml/gal (This is the primary source of Nitrogen (N) for rapid leaf and stem growth.) FloraBloom: 3.0 ml/gal (A smaller dose is included to ensure all necessary P/K elements are present, even in veg.) CalMag Boost: Crucially, I added 1.9 ml/gal of CalMag. Motivation: This ensures the plant has enough Calcium and Magnesium to prevent deficiencies and handle the increased light intensity, especially as it recovers from stress. Part 2: pH Adjustment and Application The Critical pH Check: I tested the pH of the nutrient solution. Motivation: Nutrients are only available to the roots within a specific pH window. I adjusted the mix using pH down (as is usually the case with the Flora Series) until the solution was dialed in between 6.0-6.5 for optimal uptake. The Watering Technique: I slowly and evenly applied the nutrient solution to the container, making sure the entire medium was saturated. Run-off Check (The Final Step): The most important part of this session was checking the run-off. By testing the run-off EC and pH, I confirmed that the root zone is healthy, that the plant is taking up food, and that old salts aren't building up in the container. Summary of Results Everything looks good! With the perfectly balanced and measured nutrient cocktail, the Special Kush 1 now has the necessary fuel (especially the high nitrogen from the 6.1 ml/gal FloraGrow) to heal quickly and push those two newly topped branches into strong growth, setting us up for success with the manifold!
Likes
17
Share
Likes
5
Share
@Satax
Follow
A good week has passed now. The light is at full power. The flowers are starting to bulk up. I’m trying to manage everything as best as I can. The plants are starting to get really heavy..
Likes
8
Share
Done abit of lst this week on a few of the big ones First timer not really got a clue what to do so trying trial and error One half the back of tent got a trellise over them the other half have had the fam leaves tucked under and the ones you see under the smaller light have been tied down about 90 degree angle Also a few showing signs of maybe nutrient deficiency of some sort could anybody give a hand as to what this is also something I’ve noticed over the last week a lot of the leaves look almost chewed off complete fan leaves gone only the stem left this is a indoor grow first time I can’t seem to see anything in the tent or any signs of snails or slugs and I’ve put it down to water landing on the leafs and burning them away completely (pot head conspiracy ) any help would be much appreciated please
Likes
65
Share
Salut à tous, 📰...Le 8 Avril 2021...📰 🌿...Jour N°68...🌿 Fin de la 10ème semaine de croissance pour mes trois Hulkberry Feminisées de chez Royal Queen Seeds..👑 Les plantes sont belles, je les laisse encore végéter jusqu'à que leurs hauteur me convient. Dix semaines de croissance c'est pas normal, mais je lâche pas l' affaire.. 🍼...Nutriments...🍼 En rempotant mes plantes, j'ai mis 40 grammes de Easy Boost Organic Nutrients de chez RQS Organic Nutrients.. À chaque arrosage je leurs donne du Calgreen de chez Metrop.. 🔦...Light...🔦 #MarsHydro Tsw 2000 à 50% de puissance et à 70 cm de la canopé. 🐜...Pest...🐜 Le traitement de Tech Fort à l'air de bien marcher..👍 Voilà c'est tout pour l'instant mes amis. Merci beaucoup d'être passé par là. Prenez soin de vous et de vos proches. Je vous souhaite que du bonheur avec vos plantations..😘 📭...À bientôt..💨💨💨
Likes
21
Share
I use the Eagle Star LED ESF8800 880 LED Grow Light for Veg and flower stage, it acts wonderfully, ESF8800 is perfect for planting with spectrum tunable (red+uv+ir), thanks very much.
Likes
14
Share
@Kokotokes
Follow
This has taken quite longer then I anticipated I'm really hoping it finishes soon but I cant complain buds have doubled in size in past week. But neither has major smell one with leaves has a sweet smell if u touch it but no leaves has no smell other then plant but trichromes went crazy when I chopped leaves was hoping for smell to come with it but I was wrong. I would love for some to guesstimate how much longer i got. Being this my first autoflower idk what to go by this is 8th week of flower for these 2
Likes
20
Share
Deficiencies are beginning to disappear. Las deficiencias están empezando a desaparecer.