Not too long to wait til harvest now!! I think I overdid the nutrients. Was following biobizz schedule but it seems very heavy n ppm was very high. The tips of leaves are yellow now from nutrient burn so I halved nutrients except bloom n top max. Should prob flush but I’m gona do a big flush End of this week and give just water then until harvest

Gaia F1 has done very nicely. 29.8.25 I watered. I watered with 2ltrs of dechlorinated water PH'd to 6.5 with; 💜 1ml Trace PH: 6.5 PPM: 355 * Nb. Days are calculated from seed planting on wards. Thanks for checking this one out. Again, this week, feel free to hang out in the comments. Love to hear from you all. 😁💚✌️🌱👌

She is growing great and right where I want her. I mainlined her on day 14. I topped her above the third node and left a small stump. The stump will swell which helps keep the main from splitting later in life. I cut everything below and will the down the new growth.

both seeds grew upside down so it took 2 weeks to sprout upside rite then one seed stopped growing till i hand removed shell casing from been leaves and then started moving again with photothensis turning her green and alive once more have had a very slow germination need at least a few weeks in veg its going to be cutting it very close for time to harvest bubba cheesecake

11/19 Week 8 Still building, no signs of slowing down though leaves are fading. 11/20 Can anyone say rainbow sherbet? Absolutely candy here 11/22 Fed Bio-Bloom 7 ml / CaliMagic 4ml / Recharge 0.5 tsp per gallon PH 6.5 We had a oops and the room overheated for about an hour or so and may be some foxtailing due to that. Nothing for it now

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flower Day 65 since time change to 12/12 hrs. Hey everyone 😀. We arrived last week. Unfortunately, I'll be harvesting the lady a few days earlier than planned since it started a little on the top 2 buds to mold :-( Very annoying with these genetics. It was also one of the few who wasn't a cuttling :-(. The harvest update is coming in the coming days. Until then, I wish you a lot of fun and all the best :-) You can buy this Strain at : https://originalsensible.com/original-sensible-seeds-zkittlez~20503 Type: Zkittlez ☝️🏼 Genetics: Afghan Kush Indica x Grandaddy Purple x Grapefruit hybrid 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Looks good from my house lol any input would be greatly appreciated guys thanks in advance! I have a couple that I’m worried about will post more video soon sorry. Good luck buds!🌳☘️

Welcome everyone Week n°4 ended for these three phenos of SORBET#4 🌿🌿🌿🍧 Like you have probably see in the video, a few days ago i have made a one topping, on the central stem, for increase the power of the lower branches exposing them to a better lights conditions.. I have also cut two or three leafs, not too much for now, just for increase the airflow and also again for a higher lights exposure of the lowers parts✂️ 🍃 About the lights 💡 Doing that, i have increase the potency of my two Mars-Hydro SP3000, from 25% to 50% ⬆️ The two led panel are connected with a cable and i have only to adjuste the dimmer of one of them for change the intensity of each one, in just one move.. Pretty useful 💯 In the middle of the week i have switch from 18/6 on/off to 16/8 on/off.. Always tryed to mimic the natural cycle of the sun light, works good to me 👌 Anyway.. About nutrients 👇 In this week i have giving their always organic/veganic nutrients.. A little bit of silicium (Bionova) / Activator (Biomagno) / Crescita (Biomagno) / Activera (Biobizz) / Grow vegan (Bionova) / The Missing Link (Bionova) / X-Cell (Bionova) and a little bit of P-K 3-5 (Bionova) {This last one i have used in a foliar spray solution} Like i usually do, a little bit of everything at any watering 💧 And that's all.. Another week in vegetation and then we can thinking abot flowering 🌻 See you next.. Thank you for stopping by and reading 😎👍 FC ✌️ 🇮🇹

N'hésitez pas à me contacter si vous avez des questions! Pour préparer votre solution, dans votre réservoir ou arrosoir : Mettre en premier la base (Iguana) Ensuite Ancient Earth Et enfin les bactéries ASSUREZ-VOUS D'UTILISER UNE EAU DE BONNE QUALITE (EC < 0,2) POUR DE MEILLEURS RESULTATS. J'utilise un substrat non enrichi pour permettre le meilleur départ à mes plantes. Il s'agit du Promix de Plagron, il a une EC proche de 0, c'est pour cette raison que je commence les engrais assez fort dès le début. Les plantes sont très gourmande sous LED haute intensité et l'enracinement est rapide. J'arrose tous les 3 jours environ avec 2 arrosages à l'engrais et 1 à l'eau par semaine. Je n'attend pas que le substrat sèche complétement sinon ça réduit l'efficacité de l'arrosage, ça détruit la faune et éventuellement facilite la cristallisation des minéraux. Au niveau du volume d'arrosage, il faut prendre en compte 1/3 de la taille du pot. Pour un pot de 1L je vais donc arroser environ 300ml. Pour un Pot de 10L je vais arroser environ 3L. Il est important d'arroser doucement pour éviter que l'eau ne coule tout de suite au fond. Il est important d'avoir au moins 15% de drain pour s'assurer d'évacuer tous les nutriments non consommé et faire la place aux nouveaux. IL EST PRIMORDIALE D'EVACUER L'EAU AU FOND DES COUPELLES, c'est une eau qui est chargée en nutriments non consommé et on ne veut pas qu'elle remonte dans les pots car cela risquerait de créer des blocages. Au niveau de la technique de taille de formation, je réalise tout de suite une FIM que je reproduirai dès que l'apex aura repoussé. La première FIM est la plus longue mais les suivantes sont très rapide car la plante s'habitue à la technique et cela la stress beaucoup moins. En général il faut reproduire la FIM tous les 3 à 4 jours en fonction de la vigueur. C'est une technique très facile à mettre en œuvre et ne demande aucun matériel. C'est aussi la plus rapide pour obtenir des buissons. N'hésitez pas à me contacter si vous avez des questions concernant la FIM! Je retire également les feuilles supérieur (pas toute pour éviter de ralentir la plante) qui cache les secondaires pour augmenter l'efficacité de la FIM sur la croissance des secondaires.

July 27: staring week 7 and she seems to be preflowering but I’m going to force flower this auto by sticking it in the dark garage with my photoperiod plants. The change to 12 h of darkness for a couple weeks should kick it into flowering mode. I’ve seen a few growers commenting that their Auto Overdose wasn’t auto flowering and I don’t want to wait any longer to find out. It’s the end of July and things need to be flowering by now to finish in time before winter. The stem I broke a few days ago is showing signs of life and looks like it will more or less recover. Update: Changed my mind and removed stem as it was slowing overall growth. Cut the loss and move forward. C’est La vie, etc. July 28: plant has an okay shape considering I broke a stem. Nice lower branches came up after the plant was topped. Looks promising. July 31: looking good. Removed a single large fan leaf at the top that was shading too many bud sites.

In my quest for the perfect modern grow room, I got my hands on a super cool device: SensorPush. Each SensorPush is a tiny low-energy-bluetooth thermomether+hygrometer. I have 1 sensor in the indoor tent and 1 sensor in the outdoor micro greenhouse. Both are connected to the "SensorPush Wifi Gateway", allowing me to access to the datas at anytime from anywhere in the world. SO COOL! I started to collect datas more than a week ago and it has been already so helpful, I noticed that every single adjustment (side fan speed, thermostat mix/max, window opened/closed, driver dimming..) has a direct and immediate impact on the environment, and being able to see the detailed live statistics is the perfect way to adjust the parameters. I had one important issue this week: my timer was acting weird and the light was turning on 40 mins while the plants were in the middle of their night, but thanks to SensorPush I was able to notice the problem immediately and fix what could have gone dramatical. I love these sensors so much that I've started to dig into the SensorPush API, and guess what: after a few minutes I was able to get the datas showing up on my webcam feed, so now my webcam app is also showing me the temp+RH! SO COOL! Thanks for stopping-by and stay tuned for more big-data 😎

hey, I hope everything goes well, here the flowering is churning out beautiful colors, the size of the buds have increased significantly and the scents are quite fruity, the desire to harvest everything and taste these resinous delights is great but the plant must mature for three or four more weeks, have fun and stay tuned, best wishes from ffcoppola. 💪

vamos a poner a lavar las raíces de las White Widow y la Mamá mía ya están listas, el sistema Critical sigue en floración la Swiss cheese esta imprable, tiene muy grandes sus pistilos y huele bastante bien

“The Wock” 7 Weeks🤙🏾 Ladies are crushing its! I’ve for sure found 2 phenols I want to keep going based on structure and growth. The first was actually going to be a throw away. I didn’t like how lanky she was in her solocup stage. I instead topped her to slow down lateral grown and threw her in a 2 gallon bag to do her thing. She is now in a 7 gallon bag and has the best structure of them alll IMO. My 2nd pheno is a Tri-leaf mutation and it throws tops like no other! The perfect mother plant and is why I chose her as pheno #2. The 2 plants that were topped at the 5th node are bushing out more and more, just like it like it. There are 2 natural growing plants are doing great as well. They have nice bushing with one main cola. All plants will be defoliated 5 days before flip. The nose coming from these ladies is LOUD and I mean LOUD! Sour Candy and Burt Fuel! I’ll be taking cuts and flipping these ladies soon! Happy Growing PSGX Family! 🚀PSGX to the 🌕 #Phant0m

Fed/watered with 1 gallon of the above listed nutrients, every 3 days. (when the growing medium becomes 95% dry) Gave her a light selective de-leafing, to open up the inner bud-sites to more light. The timelapse shows me why I won't be transplanting like this again. (Slow growth/lost time from constricted root mass)

Bonne journée tout le monde 💚 ❄️❄️❄️❄️❄️❄️❄️❄️❄️❄️❄️❄️ Intensité de la FC3000: 90% Ventilation : Extracteur mars hydro 6 pouces avec filtre à charbon puissance : 4/10 (24h/24h) + 3 ventilateurs à l'intérieur ( ON 8/24h). ils s'activent à un horaire différent. Arrosage : Environ tout les 4-6 jours avec 1.5L d'eau. (+ 1gr de bioenhancer/L eau un arrosage sur 2) Température & humidité : NUIT : 16°C & 70% / JOUR : 23°C & 50% Mon instagram 🌱❤️️ https://www.instagram.com/hou_stone420/

Day 46: nutrients like plan Pictures are taken on day 47 --------------------------------------------- I got nothing to say 😅 she is growing amazing and makes me super happy😁👍 Happy growing 🍧🌱

Going into the last weeks iam very happy with my plants they´re almost too big but i love the big buds and hope they get very dense left acid dough right black domina