the bud sites are getting lots of white hairs and are growing quite big almost too fast.

These 2 plants are def different pheno's 1 just stays really small and compact while the other is a lot taller and a bit wider noded. Can't tell anything about the 👃 yet time will tell. Rock on Dr Greenthumb's 🌱

Still vegging is a good sign that she can grow some more. Expect her to start Flowering soon. Excited to see what can be achieved by an Autoflower that survived frost and low sunlight hours although not expecting much yield. Will continue with biogrow and fish mix until she start flowering. Added some mulch on day 47. The increasing temperatures and African sun is dehydrating the soil too quickly and forms a hard layer which is a pain in the ass when I water.

Week 3 (06/02 - 12/02) During this week I will try to apply the LST to the plants. On the inkbird, I will switch the fan with the extractor. The heating/cooling system parameters will be: 23.5°C (+0.5°/-3°C). The extractor will be on 5 hours in the morning, 5 hours in the afternoon. I will continue to feed the plants with tap water and only 2ml/l of Bio-grow. I will increase the light up to 75% with a distance of 30cm from the top of the plants. 06/02 D15: - 07/02 D16: first LST, bent down the pants directly to the soil. Watered the plants with tap water (0,5l each) 08/02 D17: I increased the inkbird cooling parameter to +1°C because the temperature inside the tent starts to increase faster. The plants seem to have responded well to first training 09/02 D18: watering day. I added 2ml of Bio-grow to 1.5l of tap water. 10/02 D19: - 11/02 D20: today I applied a second LST bending because the plants started to grow strait. After the training I sprayed the pants with tap water. 12/02 D21: watering day, I added 3ml of Bio-grow to 1.5l of tap water

Tag 77: Heute ein letztes Mal die Lampe auf 30cm gestellt. Wurde auch Zeit so langsam werden die heller. Nun auch die volle Düngemenge. Nur das Klima ist ein Krimi 😱 wir haben aktuell hier viel Regen, zwischenzeitlich recht warm, also ein ewiges hin und her. Gestern hatte ich dann schon die ersten Trauermücken 😩 Da hab ich nicht lange gefackelt und Entfeuchter in die Grow Boxen gestellt, dafür ist es nun aber mindestens 1°C wärmer in den Boxen. Wenn es draußen nicht zu warm wird könnte es klappen.wenn..... Tag 80: Aktuell haben wir hier ein Subtropischen Klima, ich habe Temperaturen in der Box von bis zu 28°C, Abkühlung in der Nachtphase ist auch nicht mehr möglich. Doch meine Pflanzen stecken es soweit gut weg, sie sehen sogar noch vitaler aus 😍

Easy to grow. Started out pretty rough due to my PH being way to low and honestly plants were underfed being in coco now seems the plants want food sooner then they did in soil. So around day 5 start slowly introducing Megacrop to them. Other then easy to grow fun as fuck smells so good. The yield im really happy with i was only expecting 3 zips tbh. The buds smell so good right out the herbsnow dryer and lightly trimmed and placed into jars for the curing process. I am beyind happy considering the timing and everything. Will be a lovely 420 treat. Thank you to everyone who watched me grow this one :).

Starting these Sweet cheese F1, inside a home made SpaceBucket. It has a Chinese UFO LED (150W - 70 W real) and a strip of white LEDs. I plan on scrog and topping + LST. Im aiming to get 75 g dried from one plant. I will use TopCrop ferts along the proccess. Lets see whats up! I've been feeding it since day 5. Water PH: 6.0 Top Crop Deep Underground & Top Veg. One feed is water only, and another one is with those nutrients. I feed her 50 ml of water every 2-3 days.

Final weeks.. 💪👌

Que hay familia, actualizo la segunda semana de crecimiento de estas Runtz F1 automáticas de Zamnesia. Vemos que las 5 están en perfectas condiciones, tienen un buen color y van creciendo a buen ritmo. Empiezo por supuesto abonando una pequeña cantidad de la gama Agrobeta. La temperatura está un pelín alta 26 grados y la humedad anda entorno al 55%. Riego cada 48 horas y suelo pulverizar con agua para aumentar un poco la humedad ambiental. Hasta aquí es todo estas próximas semanas veremos cómo van avanzando. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Os comento que tengo un descuento y para que compréis en la web de Zamnesia de un 20%, el código es ZAMMIGD2023 The discount 20% and the code is ZAMMIGD2023 https://www.zamnesia.com/ Hasta aquí es todo, buenos humos 💨💨💨.

16.01.2026 – BT 75 Es wurde endlich geerntet. Die Trichome waren überwiegend milchig, des Weiteren ein geiler Mandarinen-Geruch, der aber nicht penetrant war. Das Ganze kam in DryFerm Bags und wurde 9 Tage getrocknet. Die RLF beträgt nach dem Eintüten in die Grove Bags aktuell 63 %, also optimal zum Curen. Ein abschließender Geschmackstest folgt dann!

Week 9 commence flushing. This lady is looking great, super frosty, sticky and got a sweet aroma. Removed some dying leaves and now we wait for chop in about 6-7 days.

D29: Pistils are clearly showing now. She's looking really good and vigorous. I did notice a (very) small number of brown pistils. Might be from being a little bit careless while doing LST and toching it with the iron wire, could that be? Or could there something else going on? Speaking of LST, from now on I'm going to let the main cola grow upward again. I kept her really low to give the lower branches enough space, and I think that's the case now. I also tucked away most of the fan leaves that were blocking the light of certain tops. I think I'm going to plant her out in full ground by the end of the week. Temperatures are supposed to be 20+°C then. Any thoughts about that? D31: I decided to let it stay in its current pot, in order not to stress the roots right before flowering. She still keeps on growing every day, still at a surprisingly high pace. Also, I'm tucking away the fan leaves and other leave that are blocking the sunlight from the tops. Tomorrow it's watering time again, right before the start of week 6. Since I'm only watering her after the soil is almost dried out, I'm probably not watering her for another 5-6 days. My question now is what fertilisers I should be adding. There's already 60g of granular 6-3-3 fertiliser in it (added over the past two weeks), so I won't be adding any more of that anymore. I have phosphorous grains (6-16-0), and potassium grains (2-0-20) and I'm wondering if I should already add those potassium grains or just stick with phosphorous grains this time and add potassium grains next watering when it's (probably by then) just started flowering. Any advice?

Lets go

The beauties preparing for the nugs. They‘re coming very very soon ✨ Can‘t wait anymore. Everything looks healthy so far, gotta increase the nutriens for like 5 to 10% next week

Haile Selassie, my dear Brothers and Sisters Growers. Unfortunately, I come today with some not-so-happy news about my indoor cultivation.... For several reasons beyond my control - I had to dismantle my grow box along with all the equipment and I won't be able to use it for some time (frequent visits by housing management employees). The plants remain, but I can only provide them with room conditions now. During the day, the temperature ranges from 22 - 23°C, at night 17°C. The fan ensures air circulation. The worst situation seems to me to be with the light. 18/6 all the time, but the light is now provided only by two heating bulbs from EXO-Terra - one red light 100 W and the other white light 100 W. The plants have been in this situation for 4 days and I haven't noticed anything disturbing yet. They are all healthy. Bruce Banner and American Stafford develop their young flowers very nicely and there are many of them, especially since they are all after LST training and have ScrOg added. Apple Fritter is slow to bloom, but it is developing. Week 9 started today.

They are starting to bloom as of two days ago they started to see little pistols, and the other plants are starting to stretch… I have only added a very little bit of nutrients. The strawberry gorilla is shooting up like crazy so it’s hard to keep the light at the right height for the other plants on that side of the tint.

Week 9

Still trying to push them back to the box look like a jungle in real. The plants needs every day 2 x 10 l osmo water with 2 x 0,9 ml / l TA NovaMax Bloom.

Total Days: 70 Flower: 31 Vege growth is stopped or very slow at this point. Might eke out another inch or two. I'll raise the lights as far as they can go soon (only 3-4" for the 650w light on right), but with the higher operating RH%, I've yet to see any pistil burn. The light cycle shift to accomodate the painters definitely stressed 2 plants. One was removed. The second i am retardedly going to keep. I stripped off lower weak buds that had the nanners. Pruned a few weak axilla, too. The nearby plant pistils are lily white, so it should be fine. The pistils will be changing color soon, so that will no longer be a good way to assess the risk going forward. Meh, I know it was caused by light stress, so any seeds not selfed I'll probably keep them. Overall, I'm relatively happy with development. Need to adjust some procedures in next cycle and maybe a few more tweaks in winter 2025-1. Second irrigation went well, but i did find a partially clogged emitter. Probably a plastic bit from hold-punching. With 8 emitters per pot, the overkill makes it irrelvant and the pot wasn't the slowest to finish. A few emitters has some roughly milled inlets. I'll inspect them all over the next couple weeks and replace some as needed. Just realized my new dehum was glowing in my tent the entire time. Luckily the display was facing away but now has a cardboard flap blocking it. If it was fine before, it's even safer now. Photons had to bounce of a wall and travel 5' before it could hit any plant. ----- Early update before end of week upday: So, I've been procrastinating replacing the irrigation setup. It's slowly gotten worse each year (3rd ongoing), but never had the dripper devolve into a dribble. I've been hand-watering 1 or 2 pots the last week or so. Replacing the mini sprinkler heads only fixed 1 of the problem-pots. Think the fittings are leaking on the one that did not improve. All the pvc is gone. All the 1/4" manifolds and tubing are gone. The per plant adjustable nonsense is the worst idea ever as all it does is cause pressure changes and endless tweaking of all the little sprinklers, because changing one impacts all the others, or a speck of dirt might cause a new imbalance that requires adjustments etc - Fucking nightmare of useless repetitive behaviour. Still have the 3/4" ID lead-in, heavy duty, 450psi graden hose with ball shut-off valve and pressure regulator. That is now connected to a 3/4" wye with two 1/2" irrigation tube adapters attached to each end. This forms a loop around the pots with a 1/2" tee per pot that leads to a gate shut-off valve and eight 2-gph pressure compensating emitters - 96 in total. Will do first test run on Sunday. The great thing is that this is all plug and play when I switch to injectors. That'll require some sort of pvc manifold and check valve at the utility tub, but otherwise just connect hose, and it's golden. That's the next step. I'll also re-incorporate the wifi-enabled solenoid valve at that point. Getting rid of the 55-gallon reservoir and pump would be nice. One less thing to maintain (rez) and less things that can break down (pump / powerhead). ------ Sunday Test Flawless first run. Time will tell if they are resistant to clogging, but optimistic at this point. 18psi operational pressure at the irrigation loop. Didn't even need the regulator. The mesh strainer at the pump intake doesn't have the typical, small air-bubble, so the last setup was letting a little air in. The last setup was fatally flawed. Pressure compensating emitters for the win. They didn't even squirt wildly as the air was expelled from empty tubing on first run. Took ~4mins or so. Some pots finished a bit sooner, but that's because they don't drink as much per 24 hours. I can live with that kind of waste. I'll get the timing down to reduce water usage even further. I don't need to wait for every pot to exhibit runoff as that is beyond 10% runoff needs. Might be able to get 4 fertigations before refilling reservoir instead of 3. We'll see. I don't like the minimum ~12-15 gallons sitting over night. It fouls the reservoir faster at low volumes. Anyway, super geeked. They better not clog easily, lol....