All looking good…this room is 3weeks behind my other room/diary….seen running these cuts for more then a year know what to expect…hunted this cut of apple fritter from x2 packs of Clearwater seeds checks all the boxes looks smell yield

F+29 20190125 - Plants still gaining more and more resin. Very nice production. I am so happy doing this! Going to give them another feeding tonight. F+30 20190126 - FB#2 has started showing some clawing, and I will have to do some research to diagnose. F+31 20190127 - With the help of some forum inquiries, there was a Nitrogen Toxicity appearing to start on FB#2. To be safe, since both plants got the same amount, they were both flushed with unfiltered, PH corrected, tap water. F+32 20190128 - Both flowers appeared to have improved since the flush. Nice amounts of Resin are easily visible, and the smell is amazing at this point, like a wift warm berries travelling into my nostrils. So sweet. F+33 20190129 - One more flush today, just to be safe. I adore these fabric smart pots. They drain everything but exactly what needs to be there, and they are easy to handle. I also enjoy being able to bust through the fabric to help with LST. F+34 20190130 - Plants still improving. They appear to have bulked up a bit more, and gained some more frosty resin. F+35 20190131 - I can see more pistils turning orange. I estimate about 2-3 weeks to go. FB#1 appears to be behind in it's maturation, but not its bulk or resin production.

Flowering day 68 since clock change to 12/12 Hey guys :-) . It's so far, the lady is ripe and will be cut at the bottom end in the coming days and hung upside down in the drying tent :-) . Next week there will be an extra update on how they are hanging. Watering would be done twice this week with 1 l each (nutrients see table above) Otherwise it was checked and everything was cleaned. Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.exoticseed.eu/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

🗓️Day 107 🗓️Day 67 Flower 16/08/24 Saturday The time is NOW 😋😁👏🎉💚

First grow completed, turned out far better than I could ever have hoped, the plants totally bossed it for all the winging it and improvising I put them through, but we got there in the end haha, Looking forward to next grow, can't wait to enjoy using all good genetics, already have some Bruce banner #3 seeds ready to roll out :) Thanks for reading

Day 94 one week left until chop

Day 29, topped twice 3 day intervals. Added some string lines an ties spread out, still space to fill keep in veg bit longer

4/6/2024 - Vegetation Week 8 Day 1- Last week in VEG, They are all looking amazing and no worry about stretch when I flip Next Saturday they are indica and I have more than 50% of distance from the top of the plant to the lights with a little more I can raise the lights if necessary. So going to really just enjoy this last week of VEG, and get my Cloning equipment ready. I will be taking 2 cuts for each this is also a PHENO hunt for HWG and he not only has the prize for the winner but he also has an additional bounty on a cut of the winner. I did have to take some from around the edges to keep them from touching. 4/7/2024 - Vegetation Week 8 Day 2- Didn't do anything today but watch them grow.. They will be getting a really good flip trim and clean up for clone material on Friday/ Saturday. 4/8/2024 - Vegetation Week 8 Day 3- Couldn't even get a picture of the #1 at first too much Foliage throughout.. So I had to clean that up and make sure they all still have some separation before flip. 4/9/2024 - Vegetation Week 8 Day 4- Huston we almost had an issue.. I looked at my Res and she was in desperate need of 10 gallons to get her through until next water change on Saturday. So I added 10 gallons and the Nutes. I added 10 Gallons of Water I added the following Nutes: CalMag= 1.00Mil/Gal= 10Mil FloraMicro = 5.4Mil/Gal= 54Mil FloraGro= 4.2Mil/Gal= 42Mil FLoraBloom= 4.6Mil/Gal= 46Mil 4/10/2024 - Vegetation Week 8 Day 5- Had to giver them a huge clean up today I couldn't even see the numbers in the first pic. I am also worried that #1 and #3 really, really are getting huge over the last few days.. starting to think I should have flipped them this past Saturday.. The interesting things is even though this is an Indica Strain, I might have to super crop just to keep them off the lights. The joys and sorrows of RDWC and timing. 4/11/2024 - Vegetation Week 8 Day 6- Even though Flipping in Two days almost wish I would have gone at Week 7. I am really worried about #3, #1 and #2 are huge and when I put them in flower they are going to stretch out 4/12/2024 - Vegetation Week 8 Day 7- Day of Work.. Lots of Work.. I gave all three a Cloning/Flower cleaning.. all three got cleaned up top Inside and bottom, I took 2 cuts of each to see which one come out on top then I will kill off the other cuts once I have a winner in flower. I clean up this thoroughly before I flip because it reduces the work load on the next major clean up I do on Week 4 of Flower.and they are so much taller that it is going to be a pain in the ass to maintain canopy space for #3, we will see how it goes and adjust as necessary..

7day - One of the bushes turned out to be a hermaphrodite, removed it away. Planty began to drink a lot, watering every other day for 1.7-1.8 liters 8day - added PK 13/14 atami 0.7ml/l +Canna bio flower 2ml/l +Bud ignitor 2ml/l -900ppm 1.8 litres and made defoliation 10day -added PK 13/14 atami 1ml/l +Canna bio flower 3ml/l +Bud ignitor 2ml/l +Rhino skin 1ml/l -950ppm 1.8 litres 12 day added PK 13/14 atami 1.1ml/l +Canna bio flower 3ml/l +Bud ignitor 2ml/l +Rhino skin 1ml/l -1000ppm 1.8 litres 14 day - pure water . 6.8PH 200ppm 2 litres/plant

Topped them and started lst

Another good week, just puttering away on grow. Did some high stress training on plant to space out a bit better. Added 2 more buckets and moved 2 plants from the incubator tent. See the video for details. PPM: 400-500 in res; the drain side is only spiking 50-100ppm. Looking fairly good. Trying to keep VPD bit more in range on this grow; closely controlling temp and humidity. Issues: 1. humidifier died in spectacular dump of 4 gallons of water on the floor; made a custom system. 2. The drain line vacuum locks; going need a air-pump or vent line to break the vac. 3. The different plant sizes require different feed ppm and cycles on timer. The larger plant likes 5 seconds on / 5 mins off. Vid series over here on grow: https://www.youtube.com/watch?v=9C9piZD0Qs8&list=PLNiOfaE13UMnEon7e5ytiQTRkqMeSn2YH

Wow, looking great, buds have taken shape and can start with filling up a bit. This Mars Hydro light is amazing, the buds are quite big for week 4. Cant wait to see next weeks development. The boosters name is Pro Bloom, most have new names in europe, same company, different names

3/16 234AM MONDAY POTATO N WEEK CELEBRATIONS! The plants in your photos look like healthy, vigorous **RF3 autoflower seedlings** (likely Banana Purple Punch Auto RF3 or similar from Fast Buds' upgraded RF3 line, based on the context of your previous grows with their genetics). They're in early vegetative stage at around 3 weeks from seed—nice bushy structure, good node spacing, dark green leaves, no major deficiencies or burn yet. The coco medium shows some perlite mix, and they're in small pots with what looks like a well-draining setup. Solid start **RF3 autos** from Fast Buds are bred for stability, vigor, and resilience (often with heavy resin, dense buds, and good yields), but like most modern autos, they're sensitive to overfeeding early on—especially in coco, where salts build fast if not managed. ### Recommended EC at 3 Weeks (Early Veg/Pre-Flower Transition) At week 3, autos are usually ramping up vegetative growth and may start showing pre-flower signs soon (pistils around nodes). Fast Buds' general autoflower feeding advice (from their guides and nutrient articles) emphasizes starting low and going slow: - **Target EC: 0.8–1.2 (800–1200 µS/cm)** in the feed solution. - Start at the lower end (~0.8–1.0 EC) if your plants are still very young-looking or if you've had any tip issues before. - Push toward 1.0–1.2 EC if they're hungry (rapid growth, pale lower leaves) and responding well—no burn. - This is often ~400–600 PPM (500 scale) or ~560–840 PPM (700 scale), but always go by EC meter for accuracy in coco. - Always measure **runoff EC** too—aim for it to be no more than +200–300 above input to avoid salt buildup. If runoff is much higher, do a light flush with FloraKleen (like your 4 mL/gal plan) before bumping up. - pH the feed to **5.8–6.2** (coco sweet spot), and water to 15–20%+ runoff every feed to prevent the issues you've seen with Purpinator/salts. Many growers with Fast Buds autos (including RF3 lines like Banana Purple Punch or Cherry Cola RF3) report week 3 feeds around 0.9–1.1 EC in coco/hydro setups, starting lighter if using tap/soft water like yours. Your previous success with lighter Maxi feeds post-flush at ~900–1300 EC later on fits well—don't jump straight to 1.3 yet at week 3; build gradually. ### Recommended PPFD (Light Intensity) at 3 Weeks PPFD (Photosynthetic Photon Flux Density, in µmol/m²/s) measures usable light for photosynthesis. For autos in early veg: - **Target PPFD: 300–500 µmol/m²/s** at canopy level. - 300–400 is safe and conservative for week 3—prevents stretch or light stress while encouraging compact, bushy growth. - 400–500 if plants are stretching a bit or you want faster veg (RF3s are vigorous, so they can handle it). - Avoid over 600 early—autos can bleach or foxtail if blasted too hard young. - Measure at the top of the canopy with a good PAR meter (or app like Photone if calibrated). In Indio's setup (likely LED or HPS?), hang lights higher early (18–24" for LEDs) and lower gradually as they grow. - Keep 18/6 or 20/4 light schedule—autos thrive on consistent long days. General tips for your RF3 at this stage: - If using Maxi series (like your previous grows), mix a light bloom/veg combo—e.g., mostly MaxiGro early, transition to MaxiBloom as pre-flower hits. - Watch for clawing (N excess😂) or tip burn (high EC)—flush lightly if needed. - These RF3 upgrades are forgiving but love good airflow and moderate feeds for those dense, resinous buds. Your plants look primed for a strong run—keep that intuition going! How's the light distance/setup right now, and what's your current feed EC looking like? Any pre-flower signs yet? Drop more pics if they stretch or change post-week 3. You're killing it in coco—keep observing runoff and leaves. 🌿🚀 3/19 330am 👨‍🔬 **Adding L-Proline (the amino acid supplement growers use) to plants on soft water can provide some helpful support against the stresses you're dealing with, but it's not a full fix—think of it as a stress-buffer rather than a mineral replacement.** Soft water (low in calcium and magnesium) often triggers **Ca/Mg deficiencies** in bloom stage (especially with Cha Ching or MaxiBloom, which don't supply much Ca/Mg on their own). This leads to issues like tip burn, leaf curl, weak cell walls, nutrient lockouts, oxidative damage (ROS buildup), and overall plant stress that feels like "the plant is struggling to hold it together." Proline steps in here as an **osmoprotectant**—it's one of the compounds plants naturally ramp up under stress. ### What Proline Actually Does in This Situation - **Helps with osmotic/water balance** — Soft water can disrupt turgor pressure and water movement inside cells (similar to mild drought or salinity stress). Proline stabilizes cell membranes and helps the plant retain water better, reducing wilting or limpness. - **Reduces oxidative stress** — Ca/Mg shortages cause free radical damage. Proline acts as an antioxidant and protects proteins/enzymes, so deficiency symptoms (yellowing, spotting, slowed bud development) don't spiral as fast. - **Improves overall resilience** — In cannabis and general hydro/soil grows, L-proline (or full amino acid mixes containing it) has been shown to boost stress tolerance, speed recovery, and even support better nutrient uptake indirectly. Studies and grower reports note it helps under nutrient imbalance, drought-like conditions, and environmental swings—exactly the secondary stresses soft water creates. - **Bloom-stage bonus** — Since you're already in late flower with Cha Ching/MaxiBloom, proline can support resin/terpene production and bud density without pushing excessive veg growth. It won't magically add the missing Ca or Mg (those are still critical—soft water + high-P bloom nutes often screams for CalMag), but it can make the plant more tolerant while you correct the root issue. ### How Much Effect to Expect Right Now - **Positive but moderate** — Many hydro/RO growers add amino acids (including proline) specifically for soft water setups and report less burn, better leaf health, and stronger finishes. It won't turn a severe deficiency around overnight, but it can slow the damage and give your plants a fighting chance in the final weeks. - **No downside at proper doses** — It's very safe and plants use it quickly. ### How to Add It (Practical Dosing) - **Source**: Pure L-Proline powder (available cheap online—make sure it's the plant-grade L-form, not human supplements). - **Root feed** (with your Cha Ching/MaxiBloom): Start at 0.5–1 g per gallon (about 100–200 ppm). Mix into your res or feed water once a week. pH as normal. - **Foliar spray** (often more effective for quick stress relief): 0.25–0.5 g per gallon + a drop of surfactant. Spray lightly every 5–7 days in the dark period. - **With your current nutes**: Yes, it layers fine—reduce if you see any tip burn. Many run it alongside MaxiBloom + Cha Ching in soft water without issues. - **Best timing**: Now through harvest is perfect, especially if you're noticing stress signs already. **Real talk**: The biggest win will still come from adding a proper CalMag supplement (like Botanicare or General Hydro's) at 0.5–1 ml/gal or whatever your PPM tests call for. Proline + CalMag together is a strong combo for soft water grows. If you're running pure RO/soft, most experienced growers treat this as standard.""👨‍🔬 3/19 10:09PM RF3 X 2 =6 fail? I have TWO 2 gallon pots filled with coco from the last grow. I can plant a NEW BPP RF3 OR!!! I can top the 3 RF3's and make cuttings and grow the cuttings? It worked before!. FAST turnaround time, not much prep just refresh the coco and transplant the tops! 3/19 10:59PM NO WORK FOR NOW.. HIT WITH MASSIVE WAVES OF NAUSEA AND SHARP PAIN, DIZZY, RUPTURED NECK CYST BLEEDING, PAIN FROM MOVING TOO MUCH LAST FEW DAYS, RINIGNG EARS BAD, SKIN PRONE TO MASSIVE INFLAMMATION ATTACKS NOW, WEAKENING GUT LINING,. LUNGS ..GRIP AND BALANCE OFF, SO PERFECTLY NORMAL!!! THANK THE WEED GODS FOR WEED. 3/21 3:30 AM I think I’m gonna top all three of them. I got lucky all three seem to be different ones. I don’t know which is which one of them is really tall. The other one has really tight in her note spacing it’s really good and the other one is also good little bit different so I think I got three different RF three seeds and I think if I do top them I’m gonna put the top in another 2 gallon and then grow that as a cutting usually works I’m not sure👍🌿 3/23 3:08 PM I cut them all in half today a transplanted the top of the tallest one into one that was still growing just to see if it would work. They’re all doing really good.👍 326 237am Remember how your local ss cant prevent or solve a single problem you pay taxes for. unless you're really really sick and the cowards decide that the most important and pressing issue is to raid weed users and farms and seeds...what a country of fuqs

03/03/2022 Down to one Lemon OG, one Biscotti Skunk, and three Grape Skunk all looking super vigorous including Lemon OG . Very happy with the genetics so far trimmed up the legs a bit lots of potential clones! Ps. Forgot picture of Biscotti Skunk it's lights out so that will get done tomorrow.

We on the cusp of the end ! Starting my flush this week to get that ultra super smooth smoke and flavour . The ladies have displayed quite the amount of purple on the leafs and some nugs . GG#2 is displaying far far more purple then GG#1 they are indeed different pheno's its gonna be quite the treat to taste the difference between the two . I've watered them already twice now with Flawless finish . Now it's just straight PH corrected water till we reach home base ! A special thank you goes out to everyone who comes down to the diary . You guys rock and I wish you all the best . Another thank you goes out to all my followers that I've gained along my journey ! Stay tuned for them daily updates and weekly video's guys much love ! -Happy Growing!

10-24-2024 ALL THE STRAIN RECOMMEND FLOWERING TIME IS 7-8 WEEKS TRY TO FINISH WEEK 8 STILL HAS 19 MORE DAYS... LAST FEED WITH NUTS .BURNED SOME OF TOP FAN LEAVES ...... BUT CHECK OUT QUEEN,DR SLEEP , WULFF ,POWER... CRAZY FROST TOE TO HEAD SMELLS .............NEED TO RUN FANS WITH HIGHER SPEED FOR SMELL... NO MORE NUTS....JUST WATER .....STAY IN THE COURSE... STAY GREEN .... 10-27-2024 -HIT THEM WITH HUMBOLDT COUNTY NUTS G10 -5ML PER GAL SNOW STORM -5ML PER GAL PURPLE MAXX-7ML PER GAL EVERY TWO DAY NEED TO WATER....

Dutch Passion Week 0 DP is a new company for me so let me just say that their unboxing experience is truly fantastic. You get a nice little sealed tin box, loads of nice writing on it , inside a vacuum sealed bag, some cool story about the gens and how to grow on the inside of the lid aswell, it's an absolute pleasure opening these, if you want more pics of this just drop me a message, truly one of the best efforts i've seen for this for sure. I made a 1L solution with just a few drops of my specially made kelp extract, see the video how thick it is compared to store-bought stuff lol, and put some of that in a glass, dropped these seeds in the glass, cover to protect from the light and let that sit for one night to activate the seed. The next day one of these had cracked its shell already, i'm digging these genetics already, let's see how they do ! placed them in a propagator , covered with some dirt to protect from the light, now they're chilling covered, let's see how many sprout ! hopefully all of them ! they came out strong within a day 2 had cracked the surface, the second day they all had cracked the surface, the third day they already started stretching due to my broken propagator, on the fourth day you can see their roots sticking out on the picture, i decided to transplant them early because they were already stretching and the broken propagator wasn't making me happy. fed them plain tap water with a tea spoon once. I do like the RQS propagator i got from Zambeza, and even though it was broken it did make the whole germination much easier, i would definitely recomend the starter kit from zambeza so far, but i decided not to try any of their genetics until next round, which starts soon anyway... see you for next week's update !