EarthBox [LOS] - HSC - Garlic Budder

Introduction - Week 17|10 Summary - Ensign's log, stardate 9494.73, Garden is really starting to get a bit out of control. Ahhhh yea! Great week of growing! This is the 3rd week under 12/12 but the first week of flower after the 2-week stretch. Growth has been explosive to say the least. Buds also are developing quite nicely! Been overly stoked on #4’s growth, but all phenos have been growing surprisingly well! Been watering the clones and am stoked that a lot of them are going to make it! I may actually now have too many now… Oops! Onwards to next week! [START OF WEEK 17|10] ========================================================== Garlic Budder #1 - WEEK 17|10 - Full Bloom Wk1 Garlic Budder #2 - WEEK 17|10 - Full Bloom Wk1 Garlic Budder #3 - WEEK 10 - Re-Veg Garlic Budder #4 - WEEK 09 - Full Bloom Wk1 06/24/24 → 06/30/24 This Week's Estimated Goals ---------------------------------------------------------------------------------------------- DLI: ~25 mol/m²/d PPFD: ~579 μmol/m²/s VPD: ~1.1 kPa This Week's Meter Readings & Averages [Lights On: 19:00 - 07:00] ---------------------------------------------------------------------------------------------- DLI: 25.57 mol/m²/d PPFD: 592 μmol/m²/s VPD: 0.97 kPa Soil %: [30.7, 36.9, 35.1, 30.7] ========================================================== Day 01 - Monday - 06/24/24 - Total Days: 119 ----------------------------------- Daily Averages [~01:00] - Temps: 85.3°F [29.6°C] - Humidity: 77.3% - VPD: 0.93 kPa - Soil %: [30, 38, 29, 25] ----------------------------------- - [21:09]: Night check on the 4x4 flower tent. --- Wow! The garden is looking like a jungle! --- #1 is getting too close to the light again. - [21:12]: Raised the light up a bit more. --- Left enough room so I can still raise the light up a bit more. --- Running out of vertical space! --- Before the next cycle, plan to move the exhaust fan and carbon filter outside the tent. - [21:14]: Checked the Ecowitt soil moisture sensor data: --- 30% - [CH01 EB1 - Garlic Budder #1] --- 37% - [CH02 EB2 - Garlic Budder #2] --- 28% - [CH03 GFP - Garlic Budder #3] --- 22% - [CH04 FPT - Garlic Budder #4] --- Going to be a night of watering! --- Before watering, --- Time for another round of defoliation! - [21:15]: Using a pair of trimmers, --- Gently removed more fan leaves. --- Mainly focused on #1 and removed only damaged leaves. --- Placed the trimmings onto the top mulch of both EarthBoxes. --- With the exception of #4, defoliated all plants. --- Okay! Time to water! - [21:40]: Poured 4 cups of distilled water down EB1’s fill tube. --- Poured 4 cups of distilled water down EB2’s fill tube. - [21:53]: Filled a pump sprayer with 5 cups of distilled water. ------ Added 1/32tsp of Quillaja Saponaria Extract [60] --- Gave the sprayer a good shake before spraying the entire solution onto #4’s straw mulch. --- Focused mainly on the straw. --- The health of #4 has continued to impress me! --- Bud sites are clearly starting to swell up with bud growth! --- As much as I like growing in EarthBoxes, really considering a 5 and 7-gallon fabric pot grow for the next cycle. - [22:03]: Checked on the propagation dome (in the 3x3 veg tent), --- To refresh the air, lifted the top off for a bit. --- Ooo yea! Cutting are looking green and perky! --- Also checked on the clones and #3 on the floor, --- All plants are growing along nicely! - [22:04]: Using a spray bottle, misted the top growth in the propagation dome with distilled water. --- Also misted the top growth on the floor. --- Misted the humidity dome. - [22:09]: Took the total weight of one of the clones (GGC2024 - #1 pheno). --- She weighed 230.4g --- It’s been 8 days since her last watering. --- Going for a dry weight of around 235g before watering back to around 325g --- Time to water! - [22:20]: Filled a pitcher with 5 cups of distilled water. ------ Added 1/32tsp of Quillaja Saponaria Extract [60] ------ Added 1/4tsp of Horticultural Aloe ------ Added 1/4tsp of Horticultural Coconut ------ Added 1/4tsp of Mycrobe Complete --- Mixed the solution and poured it straight into a spray bottle. - [22:28]: While on a scale, --- Gently misted the straw mulch. --- Misted 5-10 sprays. Waited a few seconds, then misted again. - [22:35]: Repeated this process until the cup weighed 325.2g --- Also marked the watering date on the side of the cup. This way I can keep track of how many days the dry-backs take. --- Placed #1 back into the tent. - [23:10]: Repeated this process for the rest of the clones that needed watering. --- Found and watered two more phenos (#4 and OG#2). --- Tried to keep the saturated weight around 325-330g --- As I was weighing, did find a few clones that will probably need watering tomorrow (~240g). --- So far so good. Don’t frack this up Ensign! --- Anyways, - [23:12]: Poured the remaining wetting solution into a measuring cup (~3cups). ------ Added distilled water until the solution was an even 4 cups. --- Poured the solution straight into a pump sprayer. --- Misted the straw mulch of #3 with the solution. --- Focused mainly on the straw. - [23:24]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. Day 02 - Tuesday - 06/25/24 - Total Days: 120 ----------------------------------- Daily Averages [~01:00] - Temps: 85.4°F [29.7°C] - Humidity: 77.6% - VPD: 0.92 kPa - Soil %: [30, 37, 39, 35] ----------------------------------- - [11:57]: Decided to start increasing the VPD in the 4x4 flower tent. --- Within the AC Infinity App, --- For the Main Tent [4x4] controller, --- Adjusted the 'Flower [12/12]' Schedule for the humidifier. ------ Increased the VPD target value from 1.0kPa to 1.1kPa --- The higher VPD level should decrease the relative humidity within the tent. --- Will continue to increase the levels of the next few weeks. - [19:35]: Night check on the 4x4 flower tent. --- Garden is starting to bloom! --- #4 and #1 are looking incredible! Even #2 is looking good! --- The stretch has seemed to slowed and bud growth is starting to swell! - [19:37]: Checked down both fill tubes. --- EB1's reservoir was completely dry! --- EB2's reservoir still had a tiny bit of water. - [19:39]: Checked the Ecowitt soil moisture sensor data: --- 30% - [CH01 EB1 - Garlic Budder #1] --- 37% - [CH02 EB2 - Garlic Budder #2] --- 38% - [CH03 GFP - Garlic Budder #3] --- 34% - [CH04 FPT - Garlic Budder #4] - [19:41]: Poured 4 cups of distilled water down EB1’s fill tube. --- Poured 2 cups of distilled water down EB2’s fill tube. - [19:45]: Checked on the propagation dome (in the 3x3 veg tent), --- To refresh the air, lifted the top off for a bit. --- Clones are still looking green! --- Also checked on the clones and #3 on the floor, --- Growth is looking great! --- #3 is continuing to re-veg and is growing along nicely! - [19:48]: Using a spray bottle, misted the top growth in the propagation dome with distilled water. --- Also misted the top growth on the floor. --- Misted the humidity dome. - [19:53]: Took the total weight of one of the clones (#1 pheno - top cutting). --- Wow! She’s a beauty! --- She weighed 232.7g --- It’s been 3 days since her last watering. --- Going for a dry weight of around 235g before watering back to around 325g --- Time to water! - [20:07]: Filled a pitcher with 3 cups of distilled water. ------ Added 1/64tsp of Quillaja Saponaria Extract [60] ------ Added 1/8tsp of Horticultural Aloe ------ Added 1/8tsp of Horticultural Coconut ------ Added 1/8tsp of Mycrobe Complete --- Mixed the solution and poured it straight into a spray bottle. - [20:15]: While on a scale, --- Gently misted the straw mulch. --- Misted 5-10 sprays. Waited a few seconds, then misted again. - [20:21]: Repeated this process until the cup weighed 326.2g --- Marked the watering date on the side of the cup. --- Placed #1 back into the tent. - [20:32]: Repeated this process for the rest of the cups and watered as needed. --- Found and watered two more phenos (#4 and OG#2). --- Tried to keep the saturated weight around 325-330g - [20:47]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. Day 03 - Wednesday - 06/26/24 - Total Days: 121 ----------------------------------- Daily Averages [~01:00] - Temps: 84.6°F [29.2°C] - Humidity: 76.2% - VPD: 0.95 kPa - Soil %: [31, 37, 37, 26] ----------------------------------- - [22:13]: Night check on the 4x4 flower tent. --- Ooo yea! The garden is looking great! --- Haven’t trained at all this grow. The canopy is just full. --- #4 is just crushing it in the corner - [22:16]: Checked down both fill tubes. --- EB1's reservoir was completely dry! --- EB2's reservoir still had a tiny bit of water. - [22:17]: Checked the Ecowitt soil moisture sensor data: --- 31% - [CH01 EB1 - Garlic Budder #1] --- 37% - [CH02 EB2 - Garlic Budder #2] --- 37% - [CH03 GFP - Garlic Budder #3] --- 22% - [CH04 FPT - Garlic Budder #4] - [22:21]: Poured 5 cups of distilled water down EB1’s fill tube. --- Poured 3 cups of distilled water down EB2’s fill tube. - [22:31]: Filled a pump sprayer with 5 cups of distilled water. ------ Added 1/32tsp of Quillaja Saponaria Extract [60] --- Gave the sprayer a good shake before spraying the entire solution onto #4’s straw mulch. --- Focused mainly on the straw. - [22:43]: Checked on the propagation dome (in the 3x3 veg tent), --- To refresh the air, lifted the top off for a bit. --- Growth is still green and looking happy! --- Also checked on the clones and #3 on the floor, --- Wow! Looking great ladies! --- Growth is vegging along. --- Guess the cloning has been a success! - [22:48]: Using a spray bottle, misted the top growth in the propagation dome with distilled water. --- Also misted the top growth on the floor. --- Did not mist #3 and only sprayed the clones. - [22:52]: Took the total weight of one of the clones (an original #1 pheno). --- She weighed 228.7g --- It’s been 10 days since her last watering. --- Going for a dry weight of around 235g before watering back to around 325g --- Checked the rest of the clones which seemed okay. --- Time to water! - [23:02]: Filled a measuring cup with 1 cup of distilled water. ------ Added a pinch of Quillaja Saponaria Extract [60] ------ Added 1/32tsp of Horticultural Coconut ------ Added 1/32tsp of Horticultural Aloe ------ Added 1/16tsp of Mycrobe Complete --- Mixed the solution and poured it straight into a spray bottle. - [23:11]: While on a scale, --- Gently misted the straw mulch. --- Misted 5-10 sprays. Waited a few seconds, then misted again. - [23:17]: Repeated this process until the cup weighed 325.7g --- Marked the watering date on the side of the cup. --- Placed her back into the tent. - [23:18]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. --- Glad that the clones are all going to make it! --- Oh, plan to film and shoot the 2nd submission video and photos for the GGC2024! --- Hyped! Day 04 - Thursday - 06/27/24 - Total Days: 122 ----------------------------------- Daily Averages [~01:00] - Temps: 84.6°F [29.2°C] - Humidity: 75.1% - VPD: 0.99 kPa - Soil %: [31, 37, 36, 36] ----------------------------------- - [17:09]: Evening check on the propagation dome (in the 3x3 veg tent), --- Refreshed the air by lifting the top off for a bit. --- Growth is looking green and growth is looking healthy! --- Also checked on the clones and #3 on the floor, --- Ladies are vegging along quite nicely! - [17:11]: Using a spray bottle, misted the top growth in the propagation dome with distilled water. --- Also misted the top growth on the floor. - [17:36]: Took the total weight of one of the clones (#1 pheno - top cutting). --- She weighed 241.1g --- It’s been 2 days since her last watering. --- Going for a dry weight of around 235g before watering back to around 325g --- Don't need to water quite yet but will tomorrow. --- Weighed the rest of the clones which were also okay. - [18:00]: Okay! Back to the GGC2024! --- Time to film my second submission. --- Will also need to take 4-5 photos. --- The video and photos are 'to prove your seedling or cutting was born or took root between June 3rd and June 30th.' --- This all has to be submitted by the 30th. - [18:05]: Done! --- It’s been 11 days since the rooted clone was planted into the solo cup. --- 21 days since the soaked cutting was planted into the Coco Coin. --- 23 days since the cutting was taken from #1 --- Stoked that she has fully rooted and has started growing. --- Wow! --- Will start training soon. Plan to do a simple bend and flip in a week or so. - [19:34]: Night check on the 4x4 flower tent. --- Wow! Bud growth is looking great! --- Also slight terpy odors are definitely present. - [17:36]: Checked down both fill tubes. --- EB1's reservoir was completely dry! --- EB2's reservoir still had a tiny puddle of water. - [19:38]: Checked the Ecowitt soil moisture sensor data: --- 31% - [CH01 EB1 - Garlic Budder #1] --- 36% - [CH02 EB2 - Garlic Budder #2] --- 36% - [CH03 GFP - Garlic Budder #3] --- 35% - [CH04 FPT - Garlic Budder #4] - [19:42]: Poured 5 cups of distilled water down EB1’s fill tube. --- Poured 3 cups of distilled water down EB2’s fill tube. --- Ooo yea! --- Noticing a bit of funk in the air! --- The ladies are definitely starting to terp out! - [19:59]: Took general PPFD readings. --- #1 was around 592 μmol/m²/s which gives a DLI of 25.57 mol/m²/d --- #2 was around 580 μmol/m²/s which gives a DLI of 25.06 mol/m²/d --- #3 was around 272 μmol/m²/s which gives a DLI of 11.75 mol/m²/d --- #4 was around 583 μmol/m²/s which gives a DLI of 25.19 mol/m²/d - [20:07]: Took the weekly height and light distance measurements. --- #1 was about 44" tall. --- #2 was about 37.75" tall. --- #3 was about 14.5" tall. --- #4 was about 41" tall. --- #1 was about 4.25" away from the grow light. --- #2 was about 10" away from the grow light. --- #3 was about 12.5" away from the grow light. --- #4 was about 8" away from the grow light. --- Going to do a bit of training on the GGC2024 clone. - [20:25]: Using some garden wire and binder clips, --- Gently wrapped and secured a wire around the base of the plant. --- Then I gently bent the main stalk over and secured it down with another piece of garden wire. --- Done! --- Sprayed the clone’s top growth with some distilled water. - [20:36]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. Day 05 - Friday - 06/28/24 - Total Days: 123 ----------------------------------- Daily Averages [~01:00] - Temps: 83.9°F [28.8°C] - Humidity: 74.8% - VPD: 0.98 kPa - Soil %: [31, 36, 36, 27] ----------------------------------- - [22:20]: Night check on the 4x4 flower tent. --- Aside from the heat, the garden is looking great! --- Starting to see signs of leaf damage. Possibly heat stress? If so, can’t do much so just going to grow on. --- Bud growth is looking great! - [22:23]: Checked down both fill tubes. --- EB1's reservoir was completely dry! --- EB2's reservoir still had a little water. - [22:26]: Checked the Ecowitt soil moisture sensor data: --- 31% - [CH01 EB1 – Garlic Budder #1] --- 36% - [CH02 EB2 - Garlic Budder #2] --- 35% - [CH03 GFP - Garlic Budder #3] --- 23% - [CH04 FPT - Garlic Budder #4] - [22:33]: Poured 5 cups of distilled water down EB1’s fill tube. --- Poured 2 cups of distilled water down EB2’s fill tube. - [22:48]: Filled a measuring cup with 5 cups of distilled water. --- Added 1/32tsp of Quillaja Saponaria Extract [60] --- Added 1/16tsp of Big 6 Micronutrients [+ Humic Acid] --- Added 1/4tsp of Horticultural Aloe --- Added 1/4tsp of Mycrobe Complete --- Added 1/2tsp of Horticultural Coconut --- Added 1/4tsp of BuildABloom --- Mixed the solution and poured it straight into a pump sprayer. - [23:07]: Misted the straw mulch of #4 with the solution. --- Focused mainly on the straw. --- Completely hyped about the healthy growth! - [23:19]: Checked on the propagation dome (in the 3x3 veg tent), --- To refresh the air, lifted the top off for a bit. --- Looking good! Starting to see some leaf damage, but overall growth looks pretty happy! --- Also checked on the clones and #3 on the floor, --- Wow! Growth is vegging along absolutely beautifully! --- The GGC2024 plant has already turned upwards towards the light. --- Stoked! - [23:22]: Using a spray bottle, misted the top growth in the propagation dome with distilled water. --- Also misted the clone’s top growth on the floor. - [23:27]: Took the total weight of one of the clones (#1 pheno - top cutting). --- She weighed 208.4g --- It’s been 3 days since her last watering. --- Going for a dry weight of around 235g before watering back to around 325g --- Time to water! --- Weighed the rest of the clones and found 4 more that need watering. --- Let’s go! - [23:37]: Filled a pitcher with 4 cups of distilled water. --- Added 1/64tsp of Quillaja Saponaria Extract [60] --- Added 1/8tsp of Horticultural Aloe --- Added 1/8tsp of Horticultural Coconut --- Added 1/8tsp of Mycrobe Complete --- Mixed the solution and poured it straight into a spray bottle. - [23:46]: While on a scale, --- Gently misted the straw mulch. --- Misted 5-10 sprays. Waited a few seconds, then misted again. - [23:53]: Repeated this process until the cup weighed 326g --- Marked the watering date on the side of the cup. --- Placed her back into the tent. - [+00:25]: Repeated this process for the rest of the cups. --- Tried to keep the saturated weight around 325-330g - [+00:28]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. Day 06 - Saturday - 06/29/24 - Total Days: 124 ----------------------------------- Daily Averages [~01:00] - Temps: 84.2°F [29.0°C] - Humidity: 74.8% - VPD: 0.99 kPa - Soil %: [31, 36, 35, 36] ----------------------------------- - [08:27]: Quick morning check on the 3x3 veg tent! --- Looking great ladies! --- #3 is still green and growth is continuing to re-veg. - [19:53]: Night check on the 4x4 flower tent. --- Garden is growing along nicely! --- Wow! #4 is the best pheno in the tent! Mainly because of the fabric pot, I think. --- Buds are just exploding with hairs! - [19:57]: Checked down both fill tubes. --- Both reservoirs were completely dry! - [20:00]: Checked the Ecowitt soil moisture sensor data: --- 31% - [CH01 EB1 - Garlic Budder #1] --- 36% - [CH02 EB2 - Garlic Budder #2] --- 34% - [CH03 GFP - Garlic Budder #3] --- 34% - [CH04 FPT - Garlic Budder #4] - [20:05]: Poured 5 cups of distilled water down EB1’s fill tube. --- Poured 2 cups of distilled water down EB2’s fill tube. - [20:21]: Checked on the propagation dome (in the 3x3 veg tent), --- To refresh the air, lifted the top off for a bit. --- Growth for the most part is looking pretty good! Can see a bit of chlorosis starting to form on the leaves, but they still look okay. --- Also checked on the clones and #3 on the floor, --- Ooo yea! All growth is perky and looking incredible! - [20:17]: Using a spray bottle, misted the top growth in the propagation dome with distilled water. --- Also misted the top growth on the floor. - [20:30]: Took the total weight of one of the clones (#1 pheno - top cutting). --- She weighed 280.6g --- It’s been a day since her last watering. --- Going for a dry weight of around 235g before watering back to around 325g --- Don't need to water yet. --- Weighed the rest of the clones which were also okay. - [20:34]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. Day 07 - Sunday - 06/30/24 - Total Days: 125 ----------------------------------- Daily Averages [~01:00] - Temps: 83.6°F [28.7°C] - Humidity: 74.0% - VPD: 1.00 kPa - Soil %: [31, 37, 34, 30] ----------------------------------- - [19:04]: Night check on the 4x4 flower tent. --- Garden is growing along nicely! --- #4 is swelling up with bud growth! --- Still some leaf damage for the ones in the EarthBoxes, but compare to my previous cycles, extremely stoked! --- Growth can always be better, but it can also always be worse. - [19:05]: Checked down both fill tubes. --- EB1's reservoir was completely dry! --- EB2's reservoir still had a little water. - [19:06]: Checked the Ecowitt soil moisture sensor data: --- 31% - [CH01 EB1 - Garlic Budder #1] --- 35% - [CH02 EB2 - Garlic Budder #2] --- 34% - [CH03 GFP - Garlic Budder #3] --- 25% - [CH04 FPT - Garlic Budder #4] --- Not going to bottom water today. --- Time to water #4! - [19:33]: Filled a pump sprayer with 6 cups of distilled water. ------ Added 1/32tsp of Quillaja Saponaria Extract [60] --- Gave the sprayer a good shake before spraying the entire solution onto #4’s straw mulch. --- Focused mainly on the straw. --- Going to also water the top soil for both EarthBoxes. - [19:33]: Filled a pump sprayer with 2 cups of distilled water. ------ Added a pinch of Quillaja Saponaria Extract [60] --- Gave the sprayer a good shake before spraying the entire solution onto the straw mulch. --- Wow! --- Buds are swelling up! --- Getting hyped! - [19:39]: Checked on the propagation dome (in the 3x3 veg tent), --- To refresh the air, lifted the top off for a bit. --- Lower growth is looking a bit gnarly (plucked off a dying leaf). --- Checked for roots, --- Wow! She popped! --- Roots are just bursting out! --- Placed her back into the tray for now. Will be planting all 3 tonight! --- Checked on the clones and #3 on the floor, --- Looking good ladies! --- #3 is looking good! She’ll probably re-vegging for another week or two, but growth is still looking green! - [19:42]: Using a spray bottle, misted the top growth in the propagation dome with distilled water. --- Also misted the top growth on the floor. - [19:49]: Took the total weight of one of the clones (GGC2024 - #1 pheno). --- She weighed 268.8g --- It’s been 3 days since her last watering. --- Going for a dry weight of around 235g before watering back to around 325g --- Don't need to water yet. --- Weighed the rest of the clones which were also okay. --- The #1 pheno has been in the solo cup for a good 14 days. --- Growth is looking happy and she has straightened out and is growing upwards! --- Flipping to flower! - [19:53]: Placed the GGC2024 pheno into on the grow tent’s floor. --- I’m just stoked that she is looking healthy! --- Don’t frack this up Ensign! - [19:58]: Took the total weight of one of the clones (#1 pheno - top cutting). --- She weighed 225.2g --- It’s been 2 days since her last watering. --- Going for a dry weight of around 235g before watering back to around 325g --- Time to water! --- Checked the rest of the clones and they all seemed okay. - [20:07]: Filled a measuring cup with 1/2 cup of distilled water. ------ Added a pinch of Quillaja Saponaria Extract [60] ------ Added 1/64tsp of Horticultural Coconut ------ Added 1/64tsp of Horticultural Aloe ------ Added 1/32tsp of Mycrobe Complete --- Mixed and poured the solution straight into a spray bottle. - [20:12]: While on a scale, --- Gently misted the straw mulch. --- Focused on the straw and tried to keep the top growth dry. --- Misted 5-10 sprays. Waited a few seconds, then misted again. - [20:18]: Repeated this process until the cup weighed 327g --- There was no runoff. --- Time to transplant more clones! --- Planting all 3 of the original #1 rooted cuttings. --- Placed the first one into a solo cup partially filled with BuildASoil 3.0 potting soil (cup also has holes for drainage). --- Made sure the solo cup had enough room for more soil. - [20:37]: Inoculated the roots with some Great White mycorrhizae. ------ Sprinkled about an 1/8tsp of Great White --- Made sure to coat the roots as evenly as possible. - [20:40]: Gently filled the solo cup around the clone with more soil. --- Gently even and patted down the top soil a bit. - [20:42]: Added some BuildASoil Organic Barley Straw to the top. --- Broke the straw mulch up a bit to help cover the top soil. - [20:46]: Placed the planted clone into the 3x3 veg tent's floor. --- The solo cup was also place on top of a drip tray. --- Misted the top growth with some distilled water. - [21:08]: Repeated this process until all 3 cuttings were planted. --- Did not have any more drip trays so they were placed on the floor. --- Time to water! - [21:11]: Filled a measuring cup with 2 cups of distilled water. ------ Added 1/64tsp of Quillaja Saponaria Extract [60] ------ Added 1/16tsp of Horticultural Coconut ------ Added 1/16tsp of Horticultural Aloe ------ Added 1/8tsp of Mycrobe Complete --- Mixed and poured the solution straight into a spray bottle. --- Starting with an original #1 pheno, - [21:17]: Took the dry weight for the cup. --- She weighed 291.4g --- While on a scale, --- Gently misted the straw mulch. --- Focused on the straw. --- Misted 5-10 sprays. Waited a few seconds, then misted again. - [21:20]: Repeated this process until the cup weighed ~330.3g --- There was no runoff. --- Placed the cup back into the tent. - [21:23]: Repeated this process until all cuttings were watered. --- Won’t be taking clones for a few months so turned the bar lights off for propagation dome. Will clean and air dry later (the dome and tray, not the lights). --- The cloning process is officially done! - [21:25]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. - [22:11]: Decided to use humidity domes. --- Misted each dome before covering all 3 cuttings. --- Wow! The veg tent is looking incredible! --- Really did not expect the cloning process to have a 100% success rate! --- Steady as she grows Ensign! [END OF WEEK 17|10]