Introduction - Week 19|12 Summary -
Ensign's log, stardate 9532.98,
What a week of growing!
Temperature stress aside, growth has been looking pretty good! Wow it’s been hot lately and I’m not using AC (summer grows are always rough).
Added 3 more Ecowitt soil sensors for the veg tent. Now can easily water as needed. Been dialing a watering routine for the 5-gallon pots.
Did another round of defoliation. Also topped a solo cup clone.
Overall pretty steady week of growth.
[START OF WEEK 19|12]
==========================================================
Garlic Budder #1 - WEEK 19|12 - Full Bloom Wk3
Garlic Budder #2 - WEEK 19|12 - Full Bloom Wk3
Garlic Budder #3 - WEEK 12 - Re-Veg
Garlic Budder #4 - WEEK 11 - Full Bloom Wk3
07/08/24 → 07/14/24
This Week's Estimated Goals
----------------------------------------------------------------------------------------------
DLI: ~20 mol/m²/d
PPFD: ~463 μmol/m²/s
VPD: ~1.2 kPa
This Week's Meter Readings & Averages [Lights On: 19:00 - 07:00]
----------------------------------------------------------------------------------------------
DLI: 21.43 mol/m²/d
PPFD: 496 μmol/m²/s
VPD: 1.11 kPa
Soil %: [50.3, 33.4, 35.6, 34.9]
==========================================================
Day 01 - Monday - 07/08/24 - Total Days: 133
-----------------------------------
Daily Averages [~01:00]
- Temps: 84.9°F [29.4°C]
- Humidity: 72.9%
- VPD: 1.09 kPa
- Soil %: [39, 34, 36, 35]
-----------------------------------
- [21:48]: Night check on the 4x4 flower tent.
--- Garden is looking incredible!
--- Growth is still burnt, but bud growth is looking and smelling quite nice!
--- #4 has taken over this grow and is looking absolutely beautiful!
--- The rest of the phenos are showing signs of heat stress, but growing along.
- [21:49]: Checked down both fill tubes.
--- EB1's reservoir was completely dry!
--- EB2's reservoir was dry but still had a tiny bit of water.
- [22:04]: Checked the Ecowitt soil moisture sensor data:
--- 41% - [CH01 EB1 - Garlic Budder #1]
--- 34% - [CH02 EB2 - Garlic Budder #2]
--- 36% - [CH03 GFP - Garlic Budder #3]
--- 32% - [CH04 FPT - Garlic Budder #4]
- [22:11]: Poured 5 cups of distilled water down EB1’s fill tube.
--- Poured 3 cups of distilled water down EB2’s fill tube.
--- Wow! The growth for the GGC2024 competition is looking great!
- [22:31]: Checked on the clones and #3 on the floor,
--- Looking good girls!
--- Growth is looking quite healthy and green!
--- The clones are fully established in their fabric pots and are looking beautiful!
--- #3 is greener and seems to be vegging with new growth!
- [22:35]: Checked the humidifiers.
--- Refilled the humidifiers with distilled water.
Day 02 - Tuesday - 07/09/24 - Total Days: 134
-----------------------------------
Daily Averages [~01:00]
- Temps: 84.7°F [29.3°C]
- Humidity: 73.1%
- VPD: 1.07 kPa
- Soil %: [47, 34, 35, 30]
-----------------------------------
- [16:32]: Evening check on the propagation dome (in the 3x3 veg tent),
--- Ooo yea! Garden is looking great!
--- All growth looks nice and green!
--- Even #3 is looking perky!
--- Nice!
- [16:35]: Received more Ecowitt soil meters from BuildASoil!
--- Time to add the new meters!
--- Slowly turned on each meter one at a time (AA battery required) and kept track of the order.
--- Placed the first meter into #1’s fabric pot.
--- The second meter was placed into the original #2’s fabric pot.
--- The third meter was placed into #4’s fabric pot.
--- Place each sensor about 3 inches away from the main stalk of each plant just outside the transplant hole radius.
- [16:55]: Checked the Ecowitt soil moisture sensor data. Updated the senor data accordingly:
--- 49% - [CH01 EB1 - Garlic Budder #1]
--- 34% - [CH02 EB2 - Garlic Budder #2]
--- 35% - [CH03 GFP - Garlic Budder #3]
--- 26% - [CH04 FPT - Garlic Budder #4]
--- 17% - [CH05 FPT - Garlic Budder #1]
--- 30% - [CH06 FPT - Original Garlic Budder #2]
--- 26% - [CH07 FPT - Garlic Budder #4]
--- Based on the current moisture levels, going to be watering tonight!
- [19:25]: Night check on the 4x4 flower tent.
--- Ooo yea! Garden is growing along nicely!
--- Can’t do anything about the heat so just going to keep on growing!
--- Bud growth is swelling and the terpenes are starting smell great!
--- Stem rubs are giving off lemon candy profiles. Hyped!
--- Keep on growing ladies!
- [19:26]: Checked down both fill tubes.
--- EB1's reservoir was completely dry!
--- EB2's reservoir still had some water.
- [19:38]: Filled a pitcher with 8 cups of distilled water.
--- Added 1/32tsp of Quillaja Saponaria Extract [60]
--- Added 1/8tsp of Bio-Phos
--- Mixed the solution thoroughly.
- [19:42]: Poured 5 cups of the solution down EB1’s fill tube.
--- Poured 3 cups of the solution down EB2’s fill tube.
- [19:54]: Filled a pump sprayer with 5 cups of distilled water.
------ Added 1/64tsp of Quillaja Saponaria Extract [60]
--- Gave the sprayer a good shake before spraying the entire solution onto #4’s straw mulch.
--- Focused mainly on the straw.
- [20:07]: Took the total weight of the GGC2024 (a #1 pheno).
--- She weighed 252.4g
--- It’s been 2 days since her last watering.
--- Time to water!
--- Going to feed some Bio-Phos.
- [20:14]: Filled a measuring cup with 1/2 cup of distilled water.
------ Added a pinch of Quillaja Saponaria Extract [60]
------ Added 1/32tsp of Bio-Phos
--- Mixed and poured the solution straight into a spray bottle.
--- While on a scale,
--- Gently misted the straw mulch.
--- Focused on the straw and tried to keep the top growth dry.
--- Misted 5-10 sprays. Waited a few seconds, then misted again.
- [20:83]: Repeated this process until the cup weighed 380.6g
--- Went a little heavier on the watering this time, but she should be fine.
--- To further train and bonsai the main stalk, added a few more binder clips and garden support wires (total dry weight for all wires and clips is now around 30g).
--- There was no runoff.
- [20:41]: Placed the GGC2024 plant back into the tent.
--- Raised her up a bit by placing her on top of an upside-down 5-gallon bucket.
- [20:53]: Back in the 3x3 veg tent,
--- Time to water the clones in the fabric pots.
- [21:00]: Filled a pump sprayer with 5 cups of distilled water.
------ Added 1/64tsp of Quillaja Saponaria Extract [60]
--- Gave the sprayer a good shake before spraying the entire solution onto #1’s straw mulch.
--- Focused mainly on the straw.
--- Filled the pump sprayer with 4 cups of distilled water.
------ Added 1/64tsp of Quillaja Saponaria Extract [60]
--- Gave the sprayer a good shake before spraying the entire solution onto #4’s straw mulch.
--- Focused mainly on the straw.
--- Filled the pump sprayer with 4 cups of distilled water.
------ Added 1/64tsp of Quillaja Saponaria Extract [60]
--- Gave the sprayer a good shake before spraying the entire solution onto the original #2’s straw mulch.
--- Focused mainly on the straw.
--- Going to increase the VPD by a bit.
- [21:36]: Within the AC Infinity App,
--- For the Main Tent [4x4] controller,
--- Adjusted the 'Flower [12/12]' Schedule for the humidifier.
------ Increased the VPD target value from 1.2kPa to 1.3kPa
--- Will adjust as needed, but this should help to drop the humidity a bit.
- [21:40]: Checked the humidifiers.
--- Refilled the humidifiers with distilled water.
Day 03 - Wednesday - 07/10/24 - Total Days: 135
-----------------------------------
Daily Averages [~01:00]
- Temps: 85.1°F [29.5°C]
- Humidity: 72.9%
- VPD: 1.10 kPa
- Soil %: [53, 34, 34, 37]
-----------------------------------
- [20:59]: Night check on the 4x4 flower tent.
--- Growth is still burnt, but looking great!
--- Nice! The GGC2024 plant is looking beautiful!
- [21:03]: Checked down both fill tubes.
--- EB1's reservoir was completely dry!
--- EB2's reservoir still had a bit of water.
- [21:05]: Checked the Ecowitt soil moisture sensor data:
--- 53% - [CH01 EB1 - Garlic Budder #1]
--- 34% - [CH02 EB2 - Garlic Budder #2]
--- 34% - [CH03 GFP - Garlic Budder #3]
--- 31% - [CH04 FPT - Garlic Budder #4]
--- 34% - [CH05 FPT - Garlic Budder #1]
--- 41% - [CH06 FPT - Original Garlic Budder #2]
--- 36% - [CH07 FPT - Garlic Budder #4]
--- Did not bottom water.
- [21:23]: Filled a pump sprayer with 5 cups of distilled water.
------ Added 1/64tsp of Quillaja Saponaria Extract [60]
--- Gave the sprayer a good shake before spraying the entire solution onto #4’s straw mulch.
--- Focused mainly on the straw.
--- Also decided to raise the GGC2024 plant up higher a bit.
--- Placed an upside-down container under her drip tray.
- [21:40]: Checked on the clones and #3 in the 3x3 tent,
--- Wow! Growth looking great!
--- Compared to the 4x4 tent, the growth in the 3x3 is significantly better!
--- The environment is perfectly dialed in for veg whereas the 4x4 is struggling with high temps.
--- Solo cups looked great and did not need watering.
- [21:52]: Checked the humidifiers.
--- Refilled the humidifiers with distilled water.
Day 04 - Thursday - 07/11/24 - Total Days: 136
-----------------------------------
Daily Averages [~01:00]
- Temps: 85.4°F [29.7°C]
- Humidity: 73.3%
- VPD: 1.10 kPa
- Soil %: [52, 33, 33, 39]
-----------------------------------
- [19:17]: Night check on the 4x4 flower tent.
--- Looking good ladies!
--- Burnt but looking good!
- [19:19]: Checked down both fill tubes.
--- Both reservoirs were completely dry!
- [19:24]: Checked the Ecowitt soil moisture sensor data:
--- 51% - [CH01 EB1 - Garlic Budder #1]
--- 33% - [CH02 EB2 - Garlic Budder #2]
--- 33% - [CH03 GFP - Garlic Budder #3]
--- 38% - [CH04 FPT - Garlic Budder #4]
--- 31% - [CH05 FPT - Garlic Budder #1]
--- 37% - [CH06 FPT - Original Garlic Budder #2]
--- 33% - [CH07 FPT - Garlic Budder #4]
- [19:28]: Poured 5 cups of distilled water down EB1’s fill tube.
--- Poured 3 cups of distilled water down EB2’s fill tube.
- [19:34]: Took the total weight of the GGC2024 (a #1 pheno).
--- She weighed 266.4g
--- It’s been 2 days since her last watering.
--- Time to water!
--- Since she is flowering in such a small container, going to start feeding a bit of fish fertilizer.
--- Going for a full feeding! Let’s go!
- [19:58]: Filled a measuring cup with 1/2 cup of distilled water.
------ Added a pinch of Quillaja Saponaria Extract [60]
------ Added half of 1/64tsp of Big 6 Micronutrients [+ Humic Acid]
------ Added 1/64tsp of Horticultural Coconut
------ Added 1/64tsp of BuildABloom
------ Added 1/32tsp of:
--------- Bio-Phos
--------- Pure Protein Dry [Organic Fish Aminos]
--- Mixed and poured the solution straight into a spray bottle.
--- While on a scale,
--- Gently misted the straw mulch.
--- Focused on the straw and tried to keep the top growth dry.
--- Misted 5-10 sprays. Waited a few seconds, then misted again.
- [20:18]: Repeated this process until the cup weighed 380.1g
--- There was no runoff.
--- Placed her back into the tent.
--- Time for another round of defoliation!
- [20:24]: Using my fingers along with a pair of cleaned trimmers,
--- Gently removed some fan leaves.
--- Mainly focused on the damaged ones.
--- Also removed larger leaves that were covering bud growth.
- [20:41]: Done!
--- The canopy looks a lot better!
--- There are still burnt leaves, but just going to keep on growing.
- [20:54]: Took general PPFD readings.
--- #1 was around 496 μmol/m²/s which gives a DLI of 21.43 mol/m²/d
--- #2 was around 490 μmol/m²/s which gives a DLI of 21.17 mol/m²/d
--- #3 was around 304 μmol/m²/s which gives a DLI of 19.70 mol/m²/d
--- #4 was around 424 μmol/m²/s which gives a DLI of 18.32 mol/m²/d
--- Also checked the GGC2024 plant which was around 245 μmol/m²/s which gives a DLI of 10.58 mol/m²/d
- [21:00]: Took the weekly height and light distance measurements.
--- #1 was about 45.5" tall.
--- #2 was about 45.5" tall.
--- #3 was about 16.75" tall.
--- #4 was about 44" tall.
--- Also checked the GGC2024 plant which was about 11" tall.
--- #1 was about 2.5" away from the grow light.
--- #2 was about 2.5" away from the grow light.
--- #3 was about 10" away from the grow light.
--- #4 was about 5" away from the grow light.
--- Also checked the GGC2024 plant which was about 27" away from the grow light.
- [21:17]: Checked on the clones and #3 in the 3x3 veg tent,
--- Growing long very nice!
--- All around growth is looking happy and green!
--- #3 continuing to bush out with new growth from the re-veg!
- [21:20]: Took the total weight of an original #2 pheno (extra one).
--- She weighed 221.9g
--- It’s been 4 days since her last watering.
--- Going for a dry weight of around 235g before watering back to around 325g
--- Time to water!
--- While on a scale,
--- Gently misted the straw mulch with distilled water.
--- Tried to keep the top growth dry.
--- Misted 5-10 sprays. Waited a few seconds, then misted again.
- [21:30]: Repeated this process until the cup weighed 337.0g
--- There was no runoff.
--- Marked the watering date on the side of the cup.
--- Wow she has stretched!
--- Decided to top her.
- [21:32]: Using a pair of clean trimmers,
--- I cut the main stalk leaving a couple nodes.
--- Could have easily cloned the topped piece, but there’s no room. Had to mulch it.
--- Placed the extra original #2 pheno back into the tent.
- [21:35]: Checked the humidifiers.
--- Refilled the humidifiers with distilled water.
Day 05 - Friday - 07/12/24 - Total Days: 137
-----------------------------------
Daily Averages [~01:00]
- Temps: 85.2°F [29.6°C]
- Humidity: 72.0%
- VPD: 1.14 kPa
- Soil %: [53, 33, 33, 33]
-----------------------------------
- [21:40]: Night check on the 4x4 flower tent.
--- Garden is burnt but looking beautiful!
--- Buds are looking incredible!
- [21:44]: Checked down both fill tubes.
--- Both reservoirs were completely dry!
- [21:48]: Checked the Ecowitt soil moisture sensor data:
--- 53% - [CH01 EB1 - Garlic Budder #1]
--- 33% - [CH02 EB2 - Garlic Budder #2]
--- 32% - [CH03 GFP - Garlic Budder #3]
--- 29% - [CH04 FPT - Garlic Budder #4]
--- 27% - [CH05 FPT - Garlic Budder #1]
--- 33% - [CH06 FPT - Original Garlic Budder #2]
--- 29% - [CH07 FPT - Garlic Budder #4]
- [22:17]: Poured 2 cups of distilled water down EB1’s fill tube.
--- Poured 3 cups of distilled water down EB2’s fill tube.
--- Going to give #4 a full bloom feeding!
--- The ratios are scaled down from the BuildASoil Schedule for Flowering.
--- Going to dilute the ratios a bit.
- [22:31]: Filled a pitcher with 5 cups of distilled water.
------ Added 1/32tsp of Quillaja Saponaria Extract [60]
------ Added 1/16tsp of Big 6 Micronutrients [+ Humic Acid]
------ Added 1/16tsp of BuildABloom
------ Added 1/16tsp of Bio-Phos
------ Added 1/4tsp of Pure Protein Dry [Organic Fish Aminos]
------ Added 1/2tsp of Horticultural Coconut
--- Mixed the solution and poured it straight into a pump sprayer.
- [22:45]: Misted #4’s straw mulch,
--- Focused on wetting the straw as evenly as possible.
- [22:48]: Checked on the vegging clones and #3 in the 3x3 tent,
--- Ah yea! Growing along beautifully my ladies!
--- # 3 is vegging along and looking perky!
--- If it weren’t for the plant count, I could easily flip these ladies into flower.
--- But with a good 6-8 weeks before the next bloom cycle, have to think of a way to slow down the growth.
--- Most likely will need to top these ladies soon.
- [22:54]: Took the total weight of the #2 pheno.
--- She weighed 234.6g
--- It’s been 7 days since her last watering.
--- Going for a general dry weight of around 235g before watering to around 325g
--- Time to water!
--- While on a scale,
--- Gently misted her straw mulch with distilled water.
--- Tried to keep the top growth dry.
--- Misted 5-10 sprays. Waited a few seconds, then misted again.
- [23:03]: Repeated this process until the cup weighed 326.2g
--- There was no runoff.
--- Marked the watering date on the side of the cup.
--- Placed her back into the tent.
- [23:10]: Filled a pump sprayer with 4 cups of distilled water.
------ Added 1/64tsp of Quillaja Saponaria Extract [60]
--- Gave the sprayer a good shake before spraying the entire solution onto #1’s straw mulch.
--- Focused mainly on the straw.
- [23:23]: Filled the pump sprayer with 4 cups of distilled water.
------ Added 1/64tsp of Quillaja Saponaria Extract [60]
--- Gave the sprayer a good shake before spraying the entire solution onto #4’s straw mulch.
--- Focused mainly on the straw.
- [23:38]: Checked the humidifiers.
--- Refilled the humidifiers with distilled water.
Day 06 - Saturday - 07/13/24 - Total Days: 138
-----------------------------------
Daily Averages [~01:00]
- Temps: 87.5°F [30.8°C]
- Humidity: 73.0%
- VPD: 1.18 kPa
- Soil %: [53, 33, 34, 38]
-----------------------------------
- [20:58]: Night check on the 4x4 flower tent.
--- Garden is looking absolutely beautiful!
--- Can be better, but can always be worse.
--- Overall, I’m stoked!
- [21:01]: Checked down both fill tubes.
--- EB1's reservoir was completely dry!
--- EB2's reservoir still had some water.
- [21:04]: Checked the Ecowitt soil moisture sensor data:
--- 53% - [CH01 EB1 - Garlic Budder #1]
--- 33% - [CH02 EB2 - Garlic Budder #2]
--- 32% - [CH03 GFP - Garlic Budder #3]
--- 35% - [CH04 FPT - Garlic Budder #4]
--- 34% - [CH05 FPT - Garlic Budder #1]
--- 31% - [CH06 FPT - Original Garlic Budder #2]
--- 37% - [CH07 FPT - Garlic Budder #4]
- [21:12]: Poured 5 cups of distilled water down EB1’s fill tube.
--- Did not water EB2.
- [21:21]: Checked on #3 and the vegging clones in the 3x3 tent,
--- Looking great ladies!
--- Wow! Every ones is getting tall!
--- #3 is staying squat, but wow she is bushing out! I am actually digging her growth morphology quite curious on the terpene profile, but will have to wait until the next cycle.
- [21:27]: Filled a pump sprayer with 4 cups of distilled water.
------ Added 1/64tsp of Quillaja Saponaria Extract [60]
--- Gave the sprayer a good shake before spraying the entire solution onto #3’s straw mulch.
--- Focused mainly on the straw.
- [21:45]: Took the total weight of an original #1 pheno.
--- She weighed 231.2g
--- It’s been 13 days since her first watering.
--- Going for a general dry weight of 235g before watering to around 325g
--- Time to water!
--- While on a scale,
--- Gently misted her straw mulch with distilled water.
--- Tried to keep the top growth dry.
--- Misted 5-10 sprays. Waited a few seconds, then misted again.
- [21:55]: Repeated this process until the cup weighed 330.6g
--- There was no runoff.
--- Marked the watering date on the side of the cup.
--- Placed her back into the tent.
- [22:02]: Checked the humidifiers.
--- Refilled the humidifiers with distilled water.
Day 07 - Sunday - 07/14/24 - Total Days: 139
-----------------------------------
Daily Averages [~01:00]
- Temps: 85.2°F [29.6°C]
- Humidity: 72.5%
- VPD: 1.12 kPa
- Soil %: [55, 33, 44, 32]
-----------------------------------
- [19:07]: Night check on the 4x4 flower tent.
--- Ooo yea! Garden is looking great!
--- #4 is dominating this grow!
--- Getting extremely hyped for the next cycle! Going to be the Garlic Budder phenos all grown in 5 gallon pots.
--- The GGC2024 plant is looking bonsaied out ant is blooming along nicely! Growth is also surprisingly healthy! Kind of funny, she’s actually the healthiest of the 6 flowering plants.
--- Wow! #4’s buds are looking frosty!
--- Anyways,
- [19:12]: Checked down both fill tubes.
--- Both reservoir were completely dry!
- [19:16]: Checked the Ecowitt soil moisture sensor data:
--- 55% - [CH01 EB1 - Garlic Budder #1]
--- 33% - [CH02 EB2 - Garlic Budder #2]
--- 43% - [CH03 GFP - Garlic Budder #3]
--- 29% - [CH04 FPT - Garlic Budder #4]
--- 29% - [CH05 FPT - Garlic Budder #1]
--- 28% - [CH06 FPT - Original Garlic Budder #2]
--- 34% - [CH07 FPT - Garlic Budder #4]
--- Not going to bottom water today.
- [19:28]: Took the total weight of the GGC2024 (a #1 pheno).
--- She weighed 235.9g
--- It’s been 3 days since her last watering.
--- Time to water!
--- While on a scale,
--- Gently misted her straw mulch with distilled water.
--- Tried to keep the top growth dry.
--- Misted 5-10 sprays. Waited a few seconds, then misted again.
- [19:58]: Repeated this process until the cup weighed 395.2g
--- There was no runoff.
--- Defoliated some of the lower leaves.
--- Marked the watering date on the side of the cup.
--- Placed her back into the tent.
--- Raised her up a bit more a few inches by placing another container under the drip tray.
- [20:57]: Filled a pump sprayer with 4 cups of distilled water.
------ Added 1/64tsp of Quillaja Saponaria Extract [60]
--- Gave the sprayer a good shake before spraying the entire solution onto #4’s straw mulch.
--- Focused mainly on the straw.
- [20:25]: Checked on the clones and #3 on the floor,
--- Wow the clones have just exploded! Getting a bit too tall.
--- #3 is looking incredible!
- [20:31]: Took the total weight of an original #1 pheno.
--- She weighed 243.5g
--- It’s been 6 days since her last watering.
--- Going for a general dry weight of 235g before watering to around 325g
--- Time to water!
--- While on a scale,
--- Gently misted her straw mulch with distilled water.
--- Tried to keep the top growth dry.
--- Misted 5-10 sprays. Waited a few seconds, then misted again.
- [20:39]: Repeated this process until the cup weighed 340.9g
--- There was no runoff.
--- Marked the watering date on the side of the cup.
--- Placed her back into the tent.
- [20:49]: Repeated this process for another original #1 pheno.
--- The saturated weight was 340.6g
- [20:57]: Filled a pump sprayer with 4 cups of distilled water.
------ Added 1/64tsp of Quillaja Saponaria Extract [60]
--- Gave the sprayer a good shake before spraying the entire solution onto #1’s straw mulch.
--- Focused mainly on the straw.
- [21:14]: Repeated this process again for the original #2 pheno.
--- Focused mainly on the straw.
--- Done!
--- Will check the humidifiers tomorrow.
--- Wow what a grow week!
--- Getting hyped on the growth in the veg tent! Ladies are just stretching!
--- Plan to top each clone next week.
[END OF WEEK 19|12]
Very detailed diary. I like ur heater. Something I don't need but definitely want 1 lol..
Look forward to seen how you adapt this to pushing your grows forward.
@gottagrowsometime,
Thanks growmie! Yea, sometimes I can get a bit too detailed, but this is all just for fun!
Been using Ac Infinity's Thermoforge T3 heater for just over 2 weeks and have to say that it's the best! Highly recommend! The unit easily heats a 4x4ft grow tent along with my 10x10ft lung room. Keep in mind that it never snows where I live, but it can get pretty cold in the winter (Southern California - US). What's most impressive is that in combination with the Cloudforge T7, my overall weekly VPD averages have been a lot more stable! Also the day to night temp swings have been greatly reduced (less than 10 degrees/percent difference on the weekly temps/RH averages).
I see you're running Build-A-Soil.. Great company, products, ethics! The dude has a sweet youtube channel as well worth checking out if you haven't. Cheers good luck!