EarthBox [LOS] - HSC - Garlic Budder

Introduction - Week 16|09 Summary - Ensign's log, stardate 9475.90, What a week of growing! Growth in the 4x4 has been incredible to say the least! Can already see signs of flowering and wow these ladies can stretch! Decided to move #3 into the veg tent. Sort of forgot about my legal plant count of 6. This will free up flowering space for the GGC2024 grow. Also makes #3 my first mother plant! Also took cuttings of the original #1 pheno (in the back). Stoked on how well the overall cloning process has been going. Already can tell that some of the clones in the solo cups are easily going to make it. Already had to water one of them, and am pretty sure going to need to water the rest next week. Oh, been letting the EarthBoxes dry out a bit (soil moisture was getting a bit too high) and will most likely start watering again next week. Wow! Growth for the most part has been better than ever! Onwards Ensign! Steady as she grows! [START OF WEEK 16|09] ========================================================== Garlic Budder #1 - WEEK 16|09 - Pre-Bloom [Stretch] Garlic Budder #2 - WEEK 16|09 - Pre-Bloom [Stretch] Garlic Budder #3 - WEEK 09 - Re-Veg Garlic Budder #4 - WEEK 08 - Pre-Bloom [Stretch] 06/17/24 → 06/23/24 This Week's Estimated Goals ---------------------------------------------------------------------------------------------- DLI: ~20 mol/m²/d PPFD: ~463 μmol/m²/s VPD: ~1.0 kPa This Week's Meter Readings & Averages [Lights On: 19:00 - 07:00] ---------------------------------------------------------------------------------------------- DLI: 19.66 mol/m²/d PPFD: 455 μmol/m²/s VPD: 0.91 kPa Soil %: [43.4, 41.9, 31.1, 32.1] ========================================================== Day 01 - Monday - 06/17/24 - Total Days: 112 ----------------------------------- Daily Averages [~01:00] - Temps: 82.8°F [28.2°C] - Humidity: 75.7% - VPD: 0.91 kPa - Soil %: [55, 45, 33, 36] ----------------------------------- - [22:17]: Night check on the 4x4 flower tent. --- Wow the garden is raging with growth! --- For the most part, this has been a water only run and I am just surprised with the growth! --- All of the phenos are looking perky and happy! --- No signs of flowering quite yet as these ladies continue to stretch upwards! --- At this rate, will most likely be using garden yo-yos to support some of these in later flower. --- Or similar to last grow, may add a layer of support netting. - [22:18]: Checked down both fill tubes. --- Both reservoirs were completely dry! - [22:22]: Checked the Ecowitt soil moisture sensor data: --- 53% - [CH01 EB1 - Garlic Budder #1] --- 45% - [CH02 EB2 - Garlic Budder #2] --- 33% - [CH03 GFP - Garlic Budder #3] --- 34% - [CH04 FPT - Garlic Budder #4] - [22:25]: Poured 4 cups of distilled water down EB1’s fill tube. --- Poured 2 cups of distilled water down EB2’s fill tube. - [22:32]: Checked on the propagation dome (in the 3x3 veg tent), --- To refresh the air, lifted the top off for a bit. --- Growth is still looking green! --- Using a spray bottle, misted the top growth with distilled water. - [22:34]: Checked on the clones (in the 3x3 veg tent), --- Ooo yea! Looking good ladies! Yellowing, on some, but still growing! --- Still surprised that most of the cuttings rooted! Was honestly expecting a few at most. --- Hyped! --- Using a spray bottle, misted the top growth with distilled water. - [22:36]: Took the total weight of one of the clones (GGC2024 - #1 pheno). --- She weighed 313.9g --- It’s been a day since the last watering. --- Going for a dry weight of around 235g before watering back to around 325g so not going to water today. --- Hmm.. Oops. - [22:39]: Decided to move pheno #3 from the main 4x4 flower tent to the 3x3 veg tent. --- Currently, I have 6 plants under 12/12 lighting. Four phenos are being logged, while the other two are just left to grow (been training on the side). --- Since I am growing in the state of California, --- Just realized that when I flip one of these clones to flower in a week or so (for the GGC2024), I’ll be exceeding the legal limit of 6 flowering plants. --- Oops. --- I honestly did not expect the original two phenos (in the back of both EarthBoxes) to make it through veg. --- It’s only been a week since the 12/12 flip so growth should not be affected, but going to re-veg her under an 18/6 light cycle. - [22:46]: After a bit of re-arranging, --- Moved the #3 pheno into the 3x3 veg tent. --- Using a spray bottle, misted the top growth with distilled water. --- Nice! This also frees up a bit more space in the main 4x4 tent. Also now the flowering count is down to 5 in total. --- Since #3 is going back into veg, I won’t be able to sample her until the next grow cycle. --- Also the logs are going to be a bit weird, but just going to keep on logging and growing! --- On the positive side, #3 has inadvertently become my first mother plant! --- So in a way, I‘ve just reached another milestone! --- My current goal is to maintain at least four different mother plants. Now I have one! Cool! - [22:54]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. --- Starting to get hyped for the next grow cycle! --- If all goes well, by the time this grow is harvested and dried, I should have at least 4 healthy mother plants to take cuttings for the next grow! Going to be will be a clone to harvest cycle! --- Stoked! Day 02 - Tuesday - 06/18/24 - Total Days: 113 ----------------------------------- Daily Averages [~01:00] - Temps: 82.2°F [27.9°C] - Humidity: 75.5% - VPD: 0.90 kPa - Soil %: [54, 45, 33, 30] ----------------------------------- - [20:03]: Night check on the 4x4 flower tent. --- Ooo yea! Garden is growing along great! --- All phenos are just raging! --- #1 is really getting a bit too tall again. --- At this rate, by the end of the week, may need to raise and increase the PPFD even further. - [20:04]: Checked down both fill tubes. --- Both reservoirs were completely dry! - [20:07]: Checked the Ecowitt soil moisture sensor data: --- 53% - [CH01 EB1 - Garlic Budder #1] --- 45% - [CH02 EB2 - Garlic Budder #2] --- 32% - [CH03 GFP - Garlic Budder #3] --- 29% - [CH04 FPT - Garlic Budder #4] --- Not going to bottom water today. - [20:11]: Checked on the propagation dome (in the 3x3 veg tent), --- To refresh the air, lifted the top off for a bit. --- Growth is looking pretty good! For the most part green and happy! --- Moved the #1 clone closer to the middle of the dome (away from the LED bar). --- Using a spray bottle, misted the top growth with distilled water. --- I think the leaf damage is light burn. --- I wonder if I can order another set of height extension panels. --- Or so save money, --- I just need to raise the bar lights above the dome a bit. --- Or the bar lights can be mounted to the ceiling of the tent and adjust the intensity (28W at max). - [20:16]: Checked on the clones and #3 (in the 3x3 veg tent), --- Growth is looking good! --- Clones are continuing to recover from the transplant shock. --- Using a spray bottle, misted the top growth with distilled water. - [20:19]: Took the total weight of one of the clones (#1 pheno - top cutting). --- She weighed 298.1g --- It’s been 2 days since the last watering. --- Going for a dry weight of around 235g before watering back to around 325g so not going to water today. - [20:22]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. Day 03 - Wednesday - 06/19/24 - Total Days: 114 ----------------------------------- Daily Averages [~01:00] - Temps: 82.4°F [28.0°C] - Humidity: 75.9% - VPD: 0.89 kPa - Soil %: [48, 44, 32, 26] ----------------------------------- - [22:33]: Night check on the 4x4 flower tent. --- Wow! The garden looks absolutely beautiful! --- All phenos are growing perky and looking great! - [22:38]: Checked the Ecowitt soil moisture sensor data: --- 45% - [CH01 EB1 - Garlic Budder #1] --- 43% - [CH02 EB2 - Garlic Budder #2] --- 31% - [CH03 GFP - Garlic Budder #3] --- 23% - [CH04 FPT - Garlic Budder #4] --- #1 is really getting tall! She has already stretched and is just under the light! - [22:48]: Raised the light up a bit more. --- Did not adjust the fans. - [22:53]: Within the AC Infinity App, --- For the Main Tent [4x4] controller, --- Adjusted the 'Flower [12/12]' Schedule for the grow light. ------ Increased the MAX from 3 to 4 --- The FC-6500 is now utilizing around 326.5W (at intensity 4 out of 10). --- Will take PPFD readings tomorrow. --- Wow! Can already see bud sites developing! - [23:08]: Filled a pump sprayer with 5 cups of distilled water. ------ Added 1/32tsp of Quillaja Saponaria Extract [60] --- Gave the sprayer a good shake before spraying the entire solution onto #4’s straw mulch. --- Focused on the straw. - [22:20]: Checked on the propagation dome (in the 3x3 veg tent), --- To refresh the air, lifted the top off for a bit. --- Great! Can already see roots bursting out of #1! --- Will check the rest of the clones and up-pot tomorrow. --- Using a spray bottle, misted the top growth with distilled water. - [23:22]: Checked on the clones and #3 (in the 3x3 veg tent), --- Aye! Looking great! --- The clones are clearly showing signs of stress, but still growing! --- #3’s top has signs of flowering, but that should hopefully revert soon. The rest of her tops still look like they are vegging. --- Using a spray bottle, misted the top growth with distilled water. - [23:25]: Took the total weight of one of the clones (#4 pheno). --- She weighed 288.5g --- It’s been 3 days since the last watering. --- Going for a dry weight of around 235g before watering back to around 325g so not going to water today. - [23:28]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. --- Plan to take the weekly height measurements along with a PPFD check. Day 04 - Thursday - 06/20/24 - Total Days: 115 ----------------------------------- Daily Averages [~01:00] - Temps: 82.4°F [28.0°C] - Humidity: 75.6% - VPD: 0.91 kPa - Soil %: [42, 42, 31, 37] ----------------------------------- - [17:00]: Evening check on the propagation dome (in the 3x3 veg tent), --- Refreshed the air by lifting the top off for a bit. --- The clones look pretty good! #1 has signs of yellowing, but roots are bursting out! --- Using a spray bottle, misted the top growth with distilled water. - [17:02]: Checked on the clones and #3 (in the 3x3 veg tent), --- Growth is looking great! --- Clones are still recovering while #3 transitions back into veg. --- Using a spray bottle, misted the top growth with distilled water. - [17:08]: Took the total weight of one of the clones (#1 pheno - top cutting). --- She weighed 259.2g --- It’s been 4 days since the last watering. --- Going for a dry weight of around 235g before watering back to around 325g so not going to water today. --- Time to transplant the rooted cuttings! - [17:16]: Took the #1 rooted clone and placed her into a solo cup partially filled with BuildASoil 3.0 potting soil (cup also has holes for drainage). - [17:20]: Inoculated the roots with some Great White mycorrhizae. ------ Sprinkled about an 1/16tsp of Great White --- Made sure to coat the roots as evenly as possible. - [17:22]: Gently filled the solo cup around the clone with more soil. --- Gently patted down the top soil a bit. - [17:23]: Added some BuildASoil Organic Barley Straw to the top. --- Broke up the straw mulch up a bit to help cover the top soil. - [17:28]: Placed the planted (and marked) clone onto the 3x3 veg tent's floor. --- The solo cup was also place on top of a drip try. --- Also covered the clone with a humidity dome (sprayed with distilled water). Vents are fully closed. --- Since the dome was not tall enough, stacked it on top of 4 solo cups. - [17:44]: Repeated this process for the original #2 pheno. --- There were no roots on the #2 cutting but that’s okay (only been under the dome for 5 days). --- Time to water! - [17:52]: Filled a measuring cup with 1 cup of distilled water. ------ Added a pinch of Quillaja Saponaria Extract [60] ------ Added 1/32tsp of Horticultural Coconut ------ Added 1/32tsp of Horticultural Aloe ------ Added 1/16tsp of Mycrobe Complete --- Mixed and poured the solution straight into a spray bottle. --- Starting with #1, - [17:59]: Took the dry weight for the cup. --- She weighed 278.9g --- While on the scale, --- Gently misted the straw mulch. --- Focused on the straw. --- Misted 5-10 sprays. Waited a few seconds, then misted again. - [18:01]: Repeated this process until the cup weighed ~325g --- There was no runoff. --- Placed the cup back into the tent and under her dome. - [18:07]: Poured the rest of the solution into a clear solo cup. --- Took the #2 cutting (from the propagation dome) and dunked the Coco Coin into the solution for 5-10 seconds. --- Shook off the excess water before returning her to the propagation dome. - [19:13]: Night check on the 4x4 flower tent. --- Garden growing along just incredibly well! --- There still seems to be some leaf damage in EB1, but the overall growth is better than anything I’ve grown so far! --- Wow! - [19:17]: Checked the Ecowitt soil moisture sensor data: --- 42% - [CH01 EB1 - Garlic Budder #1] --- 42% - [CH02 EB2 - Garlic Budder #2] --- 31% - [CH03 GFP - Garlic Budder #3] --- 35% - [CH04 FPT - Garlic Budder #4] - [19:33]: Took general PPFD readings. --- #1 was around 632 μmol/m²/s which gives a DLI of 27.30 mol/m²/d --- #2 was around 485 μmol/m²/s which gives a DLI of 20.95 mol/m²/d --- #3 was around 232 μmol/m²/s which gives a DLI of 10.15 mol/m²/d --- #4 was around 620 μmol/m²/s which gives a DLI of 26.78 mol/m²/d - [19:44]: Took the weekly height and light distance measurements. --- #1 was about 38" tall. --- #2 was about 27.5" tall. --- #3 was about 13" tall. --- #4 was about 35" tall. --- #1 was about 5.5" away from the grow light. --- #2 was about 15" away from the grow light. --- #3 was about 14.5" away from the grow light. --- #4 was about 10.5" away from the grow light. - [20:00]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. --- Decided to take a cutting off of the original #1 pheno! --- Here goes nothing! - [20:10]: Filled a measuring cup with a cup of distilled water. ------ Added 1/8tsp of Horticultural Aloe --- Mixed the solution and poured it straight into a solo cup. - [20:13]: Using a pair of trimmers, --- Cleaned the bottom of each cutting a bit and placed them into the solo cup. - [20:19]: Clipped a total of 3 cuttings! --- Placed the cup onto the 3x3’s floor. --- Plan to change the water out tomorrow! Day 05 - Friday - 06/21/24 - Total Days: 116 ----------------------------------- Daily Averages [~01:00] - Temps: 83.0°F [28.3°C] - Humidity: 76.3% - VPD: 0.90 kPa - Soil %: [38, 40, 30, 30] ----------------------------------- - [21:18]: Night check on the 4x4 flower tent. --- Garden is continuing to explode! --- Top growth is really stretching! - [21:27]: Checked the Ecowitt soil moisture sensor data: --- 37% - [CH01 EB1 - Garlic Budder #1] --- 40% - [CH02 EB2 - Garlic Budder #2] --- 30% - [CH03 GFP - Garlic Budder #3] --- 26% - [CH04 FPT - Garlic Budder #4] - [21:41]: Filled a pitcher with 5 cups of distilled water. ------ Added 1/64tsp of Quillaja Saponaria Extract [60] ------ Added 1/8tsp of Recharge --- Mixed the solution before pouring it straight into a pump sprayer. --- Misted #4’s straw mulch. --- Focused mainly on the straw. - [22:01]: Checked on the propagation dome (in the 3x3 veg tent), --- To refresh the air, lifted the top off for a bit. --- #2 is looking great! --- Growth is still looking pretty green! - [22:03]: Checked on the clones (in the 3x3 veg tent), --- Ooo yea! Growth all around looks great! --- Completely surprised how many cuttings rooted! --- I only need one healthy plant per pheno (6 in total). This is looking like a very good possibility, I’ll be able to! --- The grow cycle will be a clone run, but still deciding on what and how I am growing. --- Really digging the healthy growth with #4 (my first solo cup and one of my first fabric pot grow) so might swap out the EarthBoxes and run fabric pots. --- Most likely, I’ll continue to run the EarthBoxes. Similarly, will also run a fabric pot or two. --- Have plenty of time before the next cycle so not in any hurry to decide. --- Just hyped with how well this grow is going! - [22:12]: Took the total weight of one of the clones (GGC2024 - #1 pheno). --- She weighed 268.2g --- It’s been 5 days since her last watering --- Going for a dry weight of around 235g before watering back to around 325g so not going to water today. - [22:19]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. Day 06 - Saturday - 06/22/24 - Total Days: 117 ----------------------------------- Daily Averages [~01:00] - Temps: 83.6°F [28.7°C] - Humidity: 76.2% - VPD: 0.91 kPa - Soil %: [35, 39, 30, 37] ----------------------------------- - [20:12]: Night check on the 4x4 flower tent. --- Wow the garden looks great! --- #1 is just stretching! --- She is already getting really close to the light. Again! --- Also bud sites are just sprouting with hairs! --- Hyped! - [20:16]: Checked the Ecowitt soil moisture sensor data: --- 34% - [CH01 EB1 - Garlic Budder #1] --- 39% - [CH02 EB2 - Garlic Budder #2] --- 29% - [CH03 GFP - Garlic Budder #3] --- 36% - [CH04 FPT - Garlic Budder #4] - [20:21]: Checked on the propagation dome (in the 3x3 veg tent), --- To refresh the air, lifted the top off for a bit. --- Growth is still green! - [20:23]: Checked on the clones (in the 3x3 veg tent), --- Nice! Growth is still looking pretty healthy! --- There are a few burn leaves, but wow! --- Wow! Can already clearly see noticeable height differences. --- Some of the these ladies are beginning to stretch upwards with new growth! --- Stoked! - [20:25]: Decide to remove the humidity domes from the recently planted clones (#1 and the original #2 phenos). --- Not really a proper hardening off, but better than nothing. --- Plus most of the clones in the tent were not hardened off and are growing just fine. --- Also been keeping the environment in the 3x3 at a low VPD (~0.8) so humidity has been pretty high (~78%). --- Using a spray bottle, misted the top growth in the propagation dome with distilled water. --- Also misted the top growth on the floor. - [20:33]: Took the total weight of one of the clones (GGC2024 - #1 pheno). --- She weighed 255.9g --- It’s been 6 days since her last watering. --- Going for a dry weight of around 235g before watering back to around 325g so not going to water today. - [20:34]: Took another #1 pheno’s weight (top cut). --- She weighed 225.4g --- Checked the rest of the clones and they did not need watering quite yet. --- Nice! Time to water! - [20:47]: Filled a measuring cup with 1/2 cup of distilled water. ------ Added a pinch of Quillaja Saponaria Extract [60] ------ Added 1/64tsp of Horticultural Coconut ------ Added 1/64tsp of Horticultural Aloe ------ Added 1/32tsp of Mycrobe Complete --- Mixed and poured the solution straight into a spray bottle. - [20:54]: While on a scale, --- Gently misted the straw mulch. --- Focused on the straw and tried to keep the top growth dry. --- Misted 5-10 sprays. Waited a few seconds, then misted again. - [20:58]: Repeated this process until the cup weighed 325.2g --- There was no runoff. --- Surprisingly almost had to use all of the solution. --- Going to also plant the original #1 cuttings! --- Let’s go! - [21:19]: Time to begin the rooting process! --- Filled a measuring cup with 1 cup of distilled water. ------ Added a pinch of Quillaja Saponaria Extract [60] ------ Added 1/64tsp of Horticultural Aloe ------ Added 1/32tsp of Mycrobe Complete --- Mixed the solution thoroughly. - [21:25]: Dropped 3 Coco Coin into the measuring cup. --- The coins immediately started to expand. --- [~10 minutes later] --- Took a Coco Coin and slightly shook enough moisture out so it wasn’t dripping, yet still pretty saturated. --- Temporarily set the Coco Coin in a half-cut solo cup. - [21:38]: Using a squeeze bottle filled with Clonex, --- Gently filled the pre-made hole with Clonex rooting gel. - [21:41]: Time to start planting the original #1 cuttings! --- Using a pair of clean trimmers, made a 45° cut through the bottom node. --- Then stripped away and scared some of the stem’s outer membrane before planting. --- Made sure the node was at least a good 1" below the surface of the coco. - [21:47]: Once the cutting was planted, placed her into the propagation dome. --- Had to move the #2 cutting (only have one cut of this pheno). --- Tried to keep the cuttings in the center row (in between the bar lights). --- Made sure to mark the spot where the cutting was placed (OG #1). --- Also wiped the trimmers with isopropyl alcohol in between cuttings. - [21:59]: Repeated this process until all 3 cuttings were cut, planted, and in the tray. --- While moving the #2 cutting, noticed that she rooted! --- Time to transplant the rooted cuttings! - [22:20]: Took the #2 rooted clone and inoculated her roots with some Great White mycorrhizae. ------ Sprinkled about an 1/16tsp of Great White --- Made sure to coat the roots as evenly as possible. --- Placed her into a solo cup partially filled with BuildASoil 3.0 potting soil (cup also has holes for drainage). - [22:23]: Gently filled the solo cup around the clone with more soil. --- Gently patted down and evened out the top soil a bit. --- Added some BuildASoil Organic Barley Straw to the top. --- Broke the straw up a bit to help cover the top soil. - [22:30]: Placed the planted clone onto the 3x3 veg tent's floor. --- The solo cup was also place on top of a drip tray and misted with distilled water. --- Okay! Time to water! - [22:36]: Filled a measuring cup with 1/2 cup of distilled water. ------ Added a pinch of Quillaja Saponaria Extract [60] ------ Added 1/64tsp of Horticultural Coconut ------ Added 1/64tsp of Horticultural Aloe ------ Added 1/32tsp of Mycrobe Complete --- Mixed and poured the solution straight into a spray bottle. - [22:41]: While on a scale, --- Gently misted the straw mulch. --- Focused on the straw. --- Misted 5-10 sprays. Waited a few seconds, then misted again. - [22:44]: Repeated this process until the cup weighed 324.1g --- There was no runoff. --- Placed the cup back onto the tent’s floor. --- Also covered the clone with a humidity dome (sprayed with distilled water). Vents are fully closed. --- Similar to last time, using 4 clear solo cups as height boosters for the dome. - [22:46]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. --- Wow what a day! Did a lot more planting than I was expecting. Nice! --- Also, the warm Cali summer weather is starting to ramp up in my local area! The grow room is starting to get hot and humid once more. Anyways, --- Keep on growing Ensign! --- Maximum warp! Engage! Day 07 - Sunday - 06/23/24 - Total Days: 118 ----------------------------------- Daily Averages [~01:00] - Temps: 84.3°F [29.1°C] - Humidity: 76.5% - VPD: 0.93 kPa - Soil %: [32, 38, 29, 29] ----------------------------------- - [19:15]: Night check on the 4x4 flower tent. --- Ooo yea! The garden is looking insanely well! --- It’s almost like I know what I’m doing! Almost. --- Bud sites are continuing to sprout hairs! --- These ladies are flowering! --- Growth can always be better, but wow! Never gets old. --- Really has been the best grow cycle so far. - [19:20]: Checked the Ecowitt soil moisture sensor data: --- 32% - [CH01 EB1 - Garlic Budder #1] --- 38% - [CH02 EB2 - Garlic Budder #2] --- 29% - [CH03 GFP - Garlic Budder #3] --- 29% - [CH04 FPT - Garlic Budder #4] - [19:32]: Checked on the propagation dome (in the 3x3 veg tent), --- To refresh the air, lifted the top off for a bit. --- Looking good girls! --- Wow growth looks green and happy! --- Checked on the clones (in the 3x3 veg tent), --- Veg tent is growing along surprisingly smooth and looking great! --- #3 is clearly showing signs of flowering. So I guess she will need to go through a full re-veg period. --- She should begin to re-veg within 2-3 weeks. I think. --- Similar to toping or FIMing, each flowering top will eventually split off into multiple vegging tops. --- As this is my first time, I’m not sure how long this will really take, but here goes nothing! Just keep on growing! --- Using a spray bottle, misted the top growth in the propagation dome with distilled water. --- Also misted the top growth on the floor. - [19:40]: Took the total weight of one of the clones (GGC2024 - #1 pheno). --- She weighed 244.1g --- It’s been 7 days since her last watering. --- Going for a dry weight of around 235g before watering back to around 325g so not going to water today. --- Checked the rest of the clones which didn’t need watering. --- Although, most likely will be watering a few tomorrow. - [19:46]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. --- Done! What a week! --- As the ladies in the main 4x4 finish up stretching (I hope), another week of flower done! --- Also can’t believe how well the growth has been in the 3x3 veg tent. Really did not expect the cloning to go so well. Almost wish I just took one cutting from each pheno. Almost! Cloning is too much fun! --- Getting a bit concerned about the heat, but gonna keep on growing! --- Anyways, onwards to next week! [END OF WEEK 16|09]